20 Most Recent Intel D915GUX Motherboard Questions & Answers

http://www.intel.com/p/en_US/support/highlights/dsktpboards/d915gux

click start control panel administration tools computer management device manager scroll through all of your devices

if you see a yellow question or exclamation mark ? ! or a red X you will need to update the drivers for this device right click select update driver/reinstall driver

if you can see your usb device but its not working scroll to Ports(Com&Ltd) right click to update driver

if you computer came with a motherboard disk the drivers could be on it

or you might have to download them

rather doing a driver hunt which can take hours

http://download.cnet.com/slimdrivers-free/3000-18513_4-75279940.html

it might take some time being a freeware driver solution

note: it will find all of your outdated drivers

this is a free driver solutions they will automatically search for and find the correct driver also at cnet http://download.cnet.com/2000-20_4.html on the home page you should see a search tab just type in what you are looking for IE: motherboard name sound drivers you might have to try a few times to get it right

http://download.cnet.com/drivermax/3000-18513_4-10572602.html

Windows 2000/XP/Vista/7/8 free driver program

http://download.cnet.com/drivers-for-free/3000-18512_4-75548155.html

Windows XP/2003/Vista/Server 2008/7/8 free drivers

http://www.innovative-sol.com/drivermax/ free program, paid update available

hope it helps

Test all leads that attach to your hard drive including electrical extensions,IDE,SATA

the leads from your ((motherboard to your hard drive)) make sure they have a secure connection and are not faulty or just replace them they might be faulty make sure all leads that are attached to your drives dvd\cd 3 1/2 inch floppy have secure connections and are not faulty even the electical extensions even something as small as an electrical fan and its lead can cause this problem or just replace them they could be faulty a computer needs all electrical power and data to continue through every working device and to have an end so any faulty leads will end up with a computer error

make sure your graphics card is securely seated with no dust built up or in the socket

hope this helps you

Hi, you can try the driver for win XP:

http://downloadcenter.intel.com/Detail_Desc.aspx?agr=Y&DwnldID=13032&lang=eng&OSVersion=Windows%20XP%20Professional*&DownloadType=Drivers

Or try microsoft update.

Or else you can try to find a better graphic card for the AGP slot.

Hope this will help you

http://downloadcenter.intel.com/Detail_Desc.aspx?agr=Y&DwnldID=7525&lang=eng click on the link and that is the driver your looking for. please rate me. thank you.

The connections toy are looking for are these:

In case you need further details here is the official link for the motherboard's manual.

In case of a problem or clarification, don't hesitate to post me a reply before rejecting my answer.
If you are satisfied, rate my solution with the "thumbs" or (even better) add a testimonial.

Thanks and regards
Please kindly rate this solution
Stelios
direct FixYa link: http://www.fixya.com/users/technical114

DD SYSTEM SOLUTIONS
(MOTHER BOARD CHIP LEVEL SERVICE CENTRE)
OLD NO.28, NEW NO.67, II FLOOR
SESHA CHALAM STREET, SAIDAPET,
CHENNAI - 600 015.
PHONE NO : 98405-11595

You did not specify your OS. On the following Intel support page, complete the center box (with your operating system) and then the right hand box (choose "drivers"). Carefully choose which LAN driver > Download

Intel D915GUX Downloads

No, you have PCIe 1.X

Most likely your motherboard was DOA. Send it back for a replacement. Sounds like you've done all the troubleshooting stuff.....do double check the power supply connector...especially the P4 connector that I have occasionally forgotten to plug in...that will also cause the symptoms you describe.

You should Know that, none of the 32 bits Windows can detect more than 3 GB of ram. I think, compatibility cam be a fact but dont forget this one.

According to this site here, yes it will.

Expansion Slots Two PCI
One PCI Express* x1
One PCI Express* x16

well first about the cd/dvd. it debends on the connector, if the connector is wide with 40 pins this means its a IDE. so you would connect it with a IDE cable to a ide connector on the motherboard, and by the way there can be two devices on a IDE cable, the other has to be set to master and the other to slave.


See the small 6 pins next to the cable, there you should also see a small plastic jumper with a metal inside, you need to change this jumper so its either on slave or master, only one slave or master can be present so check the other device also.

The cd / dvd may also be a smaller SATA drive and in that case you simply need to plugit into a small exactly same type of connector on the motherboard.


about the front panel

the connector should be like this

simply attach them to the correct slots

Heres a image, note that his is not your motherboard and they might be difrent.





let me know if you need more assistance.

Did you assemble the board yourself into the case? check to make sure your front panel USB connections are installed onto your motherboard in the correct order. Refer to your Motherboard Manual.If they are not, they can fry your usb devices rendering them inoperable on your pc or others. I have seen this before because of improper installation of front pannel USB connections. Good Luck

You can reset it through the HP recovery manager. First, turn off your laptop and restart it while pressing the F11 key. Then, select System Recovery, and follow the on-screen instructions to reset your HP laptop password. After that you will be able to log into your laptop again. This is one Answer But you will find various ways. Google Forgot windows 7 password on my notebook & you'll be surprised what appears. YouTube also. Hope this helps

The best way to prolong life of a computer is to blow out dust from the case and cooling fins and power supply regularly, at least every year. That prevents overheating - a primary cause of component failure. Do not overclock. Do periodic full disk backups and intermediate new file ones. Leapfrog between two external disks. They are cheap. Protect them from fire. Laptops - same story,, do not block cooling holes by putting on a blanket while lounging. And turn off machine before blowing out dust. Do not use full PSI compressor air! maybe 20 PSI...