Top 20 Lexmark X3330 All-In-One InkJet Printer Questions & Answers

HI.. TRY THIS Take a small pice of clear tape. Try covering one of the outside vertical row of contacts at thr front of the cartridge. Re-insert it and it shoudl "fool" the printer into thinking it is a new cartridge. It works for my Lexmark 2600 series all in one. Good Luck.FORUM PREFERED http://www.fixyourownprinter.com/forums/printer/35235

Try this approach instead. On your computer, go to Start menu > Programs > Lexmark 3300 Series folder > Tools > Uninstall. Your computer will then start the uninstall process. After successfully uninstalling the printer software, reboot your pc when prompted.When your computer turns on, re-install the printer driver. Please visit the Lexmark website to download the Lexmark 3300 Series printer driver on your computer. Use the Vista driver for Windows 7. Select the corresponding driver for your operating system version. Simply follow the instructions on your computer screen to complete the installation.

you can not reset the ink levels on new lexmark cartridges
You can only use new ones
and the one that you have refill will stop working after some pages
The best printers are Hp that can be refillies with no problem

Try replace your os with xp

hi Margaret,

have you considered reinstalling the drivers and applications for this Lexmark printer ?

if you need the drivers (compatible with WINDOWS VISTA only operating system), go to this link

http://support.lexmark.com/index?locale=EN&page=product&userlocale=EN_US&productCode=LEXMARK_X3330&focusedTab=DOWNLOADS#1


hope this helps

Click on the link to download the current versions of lexmark x3330 driver.

Error 1203 is an issue that occurs either when a cartridge is bad or the printer cartridge Slot is bad...

1 - try cleaning the copper contacts of the both carts and cart slot in the printer and try again..
or
2 - when error shows up, shut the printers power off; wait one minute and turn it back on press copy.

right click on my computer icon then clcik on proeprty then hardware 0>device manager
then uninstall all usb drivers then restart the computer .
If still face problem then change usb cable.
If still same then when you power up the computer press F1 or f2 or 'del' key to enter in bios then go to advanced then usb enable usb legacy 2.0 then save settings then check.

re-instal the software of your printer and restart your computer you will soon get a better result

Try changing your printer settings to picture/highest quality in the program also try a realignment if that hasn't been done recently... My printer is a lexmark and has a high quality setting if its not set correctly it will show lines in photos * this setting will use alot of ink typically*

Hi there,

• Unplug the printer cable from the computer.
• Unistall the printer drivers from Device manager and also unistall the all the printer appications
• restart the computer
• try to download drivers from the website
• after installing drivers and software it will ask you to connect the printer.
• then you can connect the printer and and try to Print the test page.

Hope this help. Please Rate My Response! Thanks! 
PREM  

Change this **** printer, the color cartriges very expensive and bad recharge. with 3 cartridge cost I have bought a new laser HP

go to printer properties in the control panel and click on latest driver

Please make sure the print head is seating properly as it should. Another reason could be the contacts of the print head are not connecting properly with the main printer due to dirt. Remove the print head, clean the contacts of the print head and where it seats at the printer. hope this will help

Download from here Valerie
http://www.siliconguide.com/drivers/device/130/

Yes it is true machine will print because its maybe need some type of repairing or the machine is not a printer of a photocopy

The problem with XP is that its not support by any new printers. However, you may be able to use the universal HP PLC5 driver to run the Lexmark.. According to Lexmark windows XP is a supported OS for this printer. Go to the Lexmark site, support and download the driver. Here is the link support lexmark com Advanced Business Computers specializes in printer copier network support and maintenance. Printer Repair Service in Miami and Fort Lauderdale FL

Here is a manual for the same. In case you are unable to do it, please call on 1-877-805-1027 for further assistance. http://www.lexmark.com/publications/pdfs/lexmarkj110/eng/clean.pdf