Lexmark X8350 Print, Scan, Copy and Fax All-in-One Multifunction Printer Plus Photo w/USB Printer ... - Page 3 - Answered Questions & Fixed issues

I have the same problem. Have you found a fix for yours?

Thanks

The Lexmark OCR software can only be installed using the installation cd that came with the printer. If you don't have it or you lost it, you can request one by contacting Lexmark Technical Support. Hope this helps.

Try these steps to remove the print jobs stuck in the queue. Follow the instructions carefully:
First, you have to stop the Print Spooler. To do this: 1. Click on the Windows logo start button. 2. Go to Control Panel 3. Open Administrative Tools 4. Open Services 5. It will pop-up a Services window. Scroll through the list and look for Print Spooler. 6. Double-click on Print Spooler, and click on the Stop button. Click on Ok button. Set the window aside.
Second, you need to clear the print jobs in the Spool folder. To do this: 1. Click on the Windows logo start button. 2. Type Spool in the Search bar. 3. Open Printers folder 4. Delete all the files in the Printers folder. Close the window.
Third, you have to re-enable the Print Spooler. To do this: 1. Go back to Services window. 2. Double-click on Print Spooler, and click on the Start button. Click on Ok button. Close the Services window. Click on the Windows logo start button. Go to Control Panel and open Printers folder. Refresh the page. That should clear the print queue now.
If it still won't print, make sure to clear the print jobs in the queue again and try to reinstall the software. If you need more assistance, leave a comment and I'll get back to it. Thanks.

Below is the link to the Lexmark support site for that particular printer the drivers can be downloaded from there.

http://support.lexmark.com/index?page=answers&startover=y&question=Lexmark_X8350&locale=en&productCode=LEXMARK_X8350&segment=SUPPORT&userlocale=EN_BE#2

Robert from Blitware

There are Lexmark X8350 drivers for Microsoft available for download in the Lexmark website. I suggest not to connect the printer to your computer yet. Download and install the software first. Just click on this link: http://bit.ly/bHkqde. Choose the correct driver compatible with your operating system. If you're using Windows 7, you can use the Vista drivers. Download and install the software. Follow the instructions. Hope this helps.

Here's the link to the Lexmark website for the available Lexmark X8350 drivers. Just click on this link: http://bit.ly/bHkqde. Choose the correct driver compatible with your computer's operating system. Then download and install the software. Hope this helps. But if you really need the installation cd itself, I suggest you request and contact Lexmark Technical Support to send you one for free. Leave a comment if you need more assistance. Thanks.

Hello my name is Israel. I have included a website where you can get the download. Good Luck and please rate. http://www.retrevo.com/support/Lexmark-X8350-Multifunction-Printers-manual/id/393ag925/t/2/

Here's a link to the Lexmark website to guide you on how to reset the language to English on the Lexmark X8350. http://bit.ly/aNYAXB. Hope this helps. If you need more assistance, leave a comment and I'll get back to it. Thanks.

you will get drivers from folowing link downlod in your hard disk then run that

http://www.printcountry.com/drivers/LEXMARK_X8350_DRIVER_DOWNLOAD.htm

Is your Lexmark on the Microsoft Hardware Compatability list for Windows 7? If not ... you are likely at the end of the rozd though you can check at www.lexmark.com/support for a driver ... http://www.microsoft.com/windows/compatibility/windows-7/en-us/default.aspx

ERROR 1203 LEXMARK ERROR 1200 Error 1203 is an issue that occurs either when a cartridge is bad or the printer cartridge Slot is bad...

1 - try cleaning the copper contacts of the both carts and cart slot in the printer and try again..
or
2 - when error shows up, shut the printers power off; wait one minute and turn it back on press copy.

If you connected this with USB and cannot press continue, you probably have to install an updated driver for your USB chipset from your PC manufacturers website. 

try this
* Press Setup menu (setup button) on the printer.

* Go to the second option print Report.

* Select the 6th option Fax log. Press Ok.

* The fax log will print now.

Take this link to Lexmark. Under the downloads tab select the drivers for your operating system.
http://support.lexmark.com/index?locale=en&segment=DOWNLOAD&startover=y&userlocale=EN_US+&question=x8350&productCode=LEXMARK_X8350&page=answers&detectedProductFacet=CMS-CATEGORY_REF.LEXMARK.PRODUCTS.ALLINONE.LEXMARK_X8350&searchid=1267616899978#2

Hello. Try to resolve the alignment problem first. That might resolve the print quality too. Here are some tips on what you can do to resolve the problem. Remove the cartridges from the printer. Close the cover of the printer without the cartridges. Unplug the printer from the power outlet. Leave it unplugged for now. Take a warm, damp paper towel. Set one ink cartridge on the paper towel like how it is placed in the printer - nozzles facing down. Drag the cartridge lightly across the paper towel in one direction (left to right) until the bottom of the cartridge looks clean. Do the same thing to the other cartridge. Plug the printer to power source. When printer asks for the cartridges, load them back in and properly secure them in its place. Close the cover. The printer may print an alignment page, just let it be. Hope this resolves your problem. Good luck!

Hy, do you want to change the language of the control panel or the language of the software that comes with the printer?

Hi, it seems you got a connection problem. Here are some tips to check it:
1. Make sure the phone line in the wall is working. There should be a dial tone if you connect a regular phone device in that.
2. Check if the telephone cable that you're using is in good condition.
3. Telephone cable from the wall/splitter must be plugged in to the Line port behind the printer.
4. Make sure that it's the correct fax number assigned in the printer.
5. If all is ok but still having the error, try plugging the printer/fax straight to the wall jack bypassing the splitter.
Hope this helps.

hello there, Try Connecting the Lexmark All-in-One directly to the phone port...but make sure that Do NOT connect any phones to the EXT port.
Make sure the Fax receive mode is set to answer the fax after 3 rings. (Press the Fax button on the operator panel and then press Options three times until ANSWER FAX WHEN is displayed. Change the settings using the - or + buttons as appropriate.)
If this does not work then do get back for any further help.
Thanks

You can't send a fax using a cell phone. The fax machine requires a regular old-fashioned analog landline.