20 Most Recent Lexmark X8350 Print, Scan, Copy and Fax All-in-One Multifunction Printer Plus Photo w/USB Printer ... - Page 4 Questions & Answers

Is your Lexmark on the Microsoft Hardware Compatability list for Windows 7? If not ... you are likely at the end of the rozd though you can check at www.lexmark.com/support for a driver ... http://www.microsoft.com/windows/compatibility/windows-7/en-us/default.aspx

If you connected this with USB and cannot press continue, you probably have to install an updated driver for your USB chipset from your PC manufacturers website. 

try this
* Press Setup menu (setup button) on the printer.

* Go to the second option print Report.

* Select the 6th option Fax log. Press Ok.

* The fax log will print now.

Take this link to Lexmark. Under the downloads tab select the drivers for your operating system.
http://support.lexmark.com/index?locale=en&segment=DOWNLOAD&startover=y&userlocale=EN_US+&question=x8350&productCode=LEXMARK_X8350&page=answers&detectedProductFacet=CMS-CATEGORY_REF.LEXMARK.PRODUCTS.ALLINONE.LEXMARK_X8350&searchid=1267616899978#2

Hello. Try to resolve the alignment problem first. That might resolve the print quality too. Here are some tips on what you can do to resolve the problem. Remove the cartridges from the printer. Close the cover of the printer without the cartridges. Unplug the printer from the power outlet. Leave it unplugged for now. Take a warm, damp paper towel. Set one ink cartridge on the paper towel like how it is placed in the printer - nozzles facing down. Drag the cartridge lightly across the paper towel in one direction (left to right) until the bottom of the cartridge looks clean. Do the same thing to the other cartridge. Plug the printer to power source. When printer asks for the cartridges, load them back in and properly secure them in its place. Close the cover. The printer may print an alignment page, just let it be. Hope this resolves your problem. Good luck!

Hy, do you want to change the language of the control panel or the language of the software that comes with the printer?

Hi, it seems you got a connection problem. Here are some tips to check it:
1. Make sure the phone line in the wall is working. There should be a dial tone if you connect a regular phone device in that.
2. Check if the telephone cable that you're using is in good condition.
3. Telephone cable from the wall/splitter must be plugged in to the Line port behind the printer.
4. Make sure that it's the correct fax number assigned in the printer.
5. If all is ok but still having the error, try plugging the printer/fax straight to the wall jack bypassing the splitter.
Hope this helps.

hello there, Try Connecting the Lexmark All-in-One directly to the phone port...but make sure that Do NOT connect any phones to the EXT port.
Make sure the Fax receive mode is set to answer the fax after 3 rings. (Press the Fax button on the operator panel and then press Options three times until ANSWER FAX WHEN is displayed. Change the settings using the - or + buttons as appropriate.)
If this does not work then do get back for any further help.
Thanks

You can't send a fax using a cell phone. The fax machine requires a regular old-fashioned analog landline.

Hello there
You may not see a paper jam.

This may work for you, it has worked for many here I given this advice so gave it a try it could work for you. Generally when this happens, something has fallen into the printer, or a piece of paper has been jammed in there.

First step, remove the ink cartridge, and turn the printer upside down and gently shake it, see if anything comes out.

If nothing goes, or you can't hear anything rattling around, get a piece of cardstock paper (60lb or heavier) and gently push this through the printer, to see if it will help push out what might be stuck in there.
And gave the rode that the ink slides on a good clean and maybe a bit oil on cloth and wipe the rod with it.

Please come back and just gave a vote, it will gave me some satisfaction to know am helping some one so I will keep on helping.
All The Best: Pineworks

here is lexmarks page for support on that printer
http://support.lexmark.com/index?page=content&productCode=LEXMARK_X8350&actp=RECOMMEND&id=DR6296&segment=DOWNLOAD&userlocale=EN_US&oslocale=en_US&locale=en
hope this helped x404x

Hello,
First click on the following link http://bit.ly/du9Myd there you will find a step by step guide on how to correctly install your printer in windows 7. About the driver that you need to use here is the link for it. It says is the Vista driver but it works on Win 7 as well.
http://bit.ly/bEr8fx

Hi,
I have had that problem before. What you need to do is uninstall all the Lexmark software and printer driver. Then go to Lexmark.com and download the latest driver and install it. That should take care of the scanning problem.

First you can dowload the driver for Windows Vista from here: http://support.lexmark.com/index?locale=en&segment=DOWNLOAD&startover=y&userlocale=EN_US&question=x8350&productCode=LEXMARK_X8350&page=answers&detectedProductFacet=CMS-CATEGORY_REF.LEXMARK.PRODUCTS.ALLINONE.LEXMARK_X8350&searchid=1265064249820#1
then uninstall the old drivers by going to control panal uninstall programs. Then reboot pc, make sure usb link is not connected. Start the install software for your x8350 it will let you know when to hook up the USB link and auto finsh the install.

Note: If you do not use the CD to install your Fax software will not be installed. If you call Lexmark they will send you a new CD for Vista 800-539-6275

I have to ask this question of you, just to make sure this is not an issue. Are you using a factory new ink cartridge?
Please consider the following:
If you are using a refilled or third party cartridge that may well be your problem. Most manufacturers build logic into their products to prevent the use of “Other Equipment Manufactured” cartridges as well as re-filled cartridges.
They do this to prevent problems from contaminated inks causing problems with print quality or damaging the physical printhead.
If you are using factory new cartridges, then please call the manufacturers Technical Support for assistance with the warranty on the cartridges
Don

If this is a genuine Lexmark device and a genuine Lexmark cartridge and you followed all the install instructions, return it to where you bought it for a replacement. If you get grief there, contact Lexmark directly. Please have your receipt available when you take these actions.

thanks for your interest in FixYa.com

you can install your printer to your computer by downloading the drivers from the Lexmark website

Cartridge World stores have a 100% satisfaction guarantee; they will repair, replace, or refund any cartridge you find unsatisfactory. You need to go to the store you purchased this cartridge from and request a new one.

ON THE INK CARTRIDGE DID YOU REMOVE THE TAPE FROM THE TWO PLACES ON IT ONE ON BACK AND ONE ON BOTTOM