20 Most Recent
Lexmark X7350 All-In-One Printer - Page 2 Questions & Answers
My lexmark x7350 has stoped
Please rebrick your printer. Pull out power supply, black box where the power cord is plugged in at the back of the printer, and put it back after 30 seconds.
If that doesn't help, try to plug the printer into a different known working power outlet in the wall.
If the problem continues, please contact Lexmark Technical Support Center for additional assistance.
I have a lexmark 7300
You can download and install the Lexmark X7300 Series Printer Driver by visiting the Lexmark website at
http://bit.ly/kqUsN8. Select your operating system, download and then execute the file. Follow the instructions on your computer screen.
New laptop with windows 7 won't print to
Make sure to use the correct printer driver version for your operating system. You may need to uninstall your existing printer driver first before downloading the new driver. Go to Start menu > Programs > Lexmark 7300 Series > Tools > Uninstall. After the uninstall process, reboot pc when prompted.
When your computer turns on, go to Start menu > right-click on Computer > Properties. Check the System Type.
Note: Use Vista driver in Windows 7.
Use the links below to download and install the printer driver:
-
Lexmark X7350 Driver for Vista/Win7 32-bit
-
Lexmark X7350 Driver for Vista/Win7 64-bit
Follow the instructions on your computer screen.
It will not load
What is the operating system running on your computer? Try to download the Windows driver for the Lexmark X7350 by visiting the Lexmark website at
http://bit.ly/kqUsN8. Use the Vista driver in Windows 7. Note: Printer is not compatible with Mac operating system.
I have a Lexmark x7350
Try to print a BLANK paper till the rollers are clean, other than that you might need to take it to a Lexmark Certified Repair Shop.
Can u help me with
Once the Lexmark cartridge is refilled, it can no longer report it's ink level. ). You should be aware that
a refilled cartridge will not be able to report its ink level, and you might
not get the print quality you expect from ink that is specially formulated by
Lexmark to pass through microscopic nozzles at extremely high temperatures.
Can a lexmark Z23 printer
Z23 printers only support up to Windows 2000 according to Lexmark.
Sometimes you can plug unsupported printers into Windows 7 and get limited functionality, but given the age of the Z23 series, you'll probably need to get a new printer for a Windows 7 machine.
Hope this was helpful. Please leave feedback. Thanks.
I lost my cd to
Hi
CLICK HEREthe link above if you click on it will take you to the lexmark site and you can download the latest drivers and software for your printer if you have any problems give me a shout back or use google and search for lexmak x73 drivers then hit search this will then list loads of sites where you can download the latest drivers for free
let me know how you get on or if you need further assistance ok
please could you rate this solution as i have a whole page of unrated posts, thanks
My window 7 laptop do
X7350 or X5470 ????
You need to first
Uninstall your current printer driver.
Disconnect the USB cable from your printer.
Locate the
Start /
Programs /
Lexmark XXXX Series /
Tools /
Uninstall Lexmark XXXX Series shortcut.
To start the
Uninstall procedure click on the
Yes button.
Please be patient and let the operation complete.
As indicated on the last screen, restart the computer by clicking
Ok.
For many Lexmark products the Vista driver will work in Windows 7; the Vista driver for your printer is compatible with both the X5470 and the X7350.
If you need to download a driver try here:
X7350
V5470
Trust this is helpful. Please vote.
Alignment problem. just refilled black ink
1) remove the cartridge and check it is not leaking. If it is, the printhead area on cart will be flooded with ink. Removing couple of ml from cart will stop it leaking.
2) If the cart looks clean (not leaking), stamp the printhead on some folded tissue paper or paper towell. It should leave a solid black stripe about 10mm long on the tissue. If it doesn't, your refill ink hasn't quite reached the printhead. You can blow little air into the breather hole (on top) to prime the printhead. Stop blowing when ink starts leaking at the printhead.
Clean the cartridge up before installing it.
3) If all above is ok and it still doesn't align properly, repeat above steps with the colour cartridge. The printer needs all colours working to perform the alignment process.
good luck with it
LC1000
www.inkbank.com.au
Not finding what you are looking for?