20 Most Recent Lexmark X7350 All-In-One InkJet Printer - Page 2 Questions & Answers

Please follow the steps on to properly Uninstall Lexmark Printers from your computer. After the uninstallation process is done, reboot pc when prompted.
When pc turns on, check if your Windows 7 is running on 32-bit or 64-bit. On your computer, go to Start menu > right-click on Computer > Properties. Take note of the System Type.
Use the link below to download and install the Lexmark X7350 Printer Driver on your computer. Note: Use the Vista Driver on Windows 7. - Lexmark X7350 Driver for Vista 32-bit - Lexmark X7350 Driver for Vista 64-bit
When the installation process is successful, try to print a document to verify that the problem is fixed.

They're available through Amazon.com and also from some eBay sellers. Here's one.

Do not worry . The blinking is due to the eeprom not initialising. Basically the logic board has had it so no-one could retrieve any info from it. If you are truly worried then remove it and smash it with a hammer. That should work!!!!

It could be that the Print Spooler service has stopped and won't let you print. Please follow the steps below to fix the problem:

1. Browse to Start -> Run.Type in "NET STOP SPOOLER" (this will stop the print spooler service)
2. Browse to your windows\system32\spool\PRINTERS\ folder. You should see files there ending in .SPL and .SHD created around the time you tried to print - delete these files.
3. Browse to Start -> Run... and type in "NET START SPOOLER" (this will restart the print spooler service)
4. Double click the printer icon in the lower-right corner of your taskbar to examine your print job queue and browse to View -> Refresh.

Also, make sure your printer driver is updated. Please visit the Lexmark website at http://bit.ly/kqUsN8 to download the printer driver. Execute the file to update your existing driver.

It could be that one of your cartridge is not properly seated in the cartridge carrier or one of the cartridges is faulty.
Follow the steps below to fix this problem:

1. Open the printer cover.
2. Remove both cartridges from the printer.
3. Close the printer cover.
4. Unplug and replug the printer printer into the power source to reset it.
5. When the printer turns on, reinsert one cartridge first. Close the printer cover.
6. Check for any errors.
7. If no errors open the printer cover again and reinsert the other cartridge.
8. Replace whichever cartridge is causing the error to appear.

Note: It is recommended to use only genuine Lexmark cartridges.

The 1203 error on your printer indicates either a communication failure between one of the cartridges and the printer or a short in one of your cartridges. Please follow the steps below to fix the problem:

1. Open the printer cover and remove both cartridges.
2. Close the cover.
3. Unplug and re-plug the printer into the power source to reset it.
4. When the printer turns on, re-insert one cartridge first. Close the cover and check for any errors.
5. If none, re-insert the other cartridge. Close the cover and check for any errors.
6. Replace whichever cartridge is causing the error to appear. You may also try to insert a different known working cartridge to determine if the other is faulty.

Try to print again.

Hello.
Remove the cartridge and clean the gold dots on the front. Also clean the corresponding terminals inside the printer.
These terminals are what recognize the cartridge and if they have ink on them it wont read.
Regards GM

When using Adobe Photoshop, select File, then Import, and then the Lexmark device. That's the only way I have found, however you should be able to scan through many programs.

To avoid further damaging the printer, it would be best to contact Lexmark technical support for assistance. I'm sorry if I didn't have the answer you are expecting.

Make sure the Lexmark OCR scan software is installed on your computer. The software is available in the install disc that came with your printer. Scanning a document:
1 Make sure the printer is connected to a computer, and both the printer and the computer are on.
2 Load an original document faceup into the ADF or facedown on the scanner glass.
3 Press Scan Mode.
4 Press or repeatedly until the destination to which you want to scan appears.
5 Press Start Color or Start Black.
6 To scan multiple pages from the scanner glass, place successive pages face down on the scanner glass and
press Start Color or Start Black.

some printers collate pages, which means they print from the last page to the first page. so that when you pick up the pages from the finished printing tray they are in order.

if you say it stops after the first page, there are a few possible reasons for this.
either you closed the application you were printing from before you finished printing (which sometimes cancels the printing job)
or the computer decided it wanted to cancel the printing on its own, this can happen if the printer has sometimes an error, this error or cause could be a lag between the data transfer to the printer.

try printing without collating the pages, while keeping the application/document open.

and make sure you have the latest drivers.

With a document open, click File, Print. -> Click Properties, Preferences, Options (or Setup). -> Click the Paper Size tab. -> select your paper size preference.

You can download the Lexmark printer drivers from theirsupport WEB site. Please click on this link and select your model printer todownload :- http://support.lexmark.com/index?page=home&locale=EN&userlocale=EN_US&segment=DOWNLOAD

hi there!

there are several reasons why the printing stops with lexmark. you can check for support at this link, you can also download a manual for that printer too.

http://www.lexmark.co.uk/lexmark/product/home/646/0,6970,252735_653293766_647139974_en,00.html?tabId=1

Do you get the same result when making a copy using the Copy button on your printer? You can try to clean the cartridge nozzles. Refer to this article in the Lexmark website on How to Clean the Print Cartridge Nozzles with the Lexmark X7350.

You can download the Lexmark printer drivers from theirsupport WEB site. Please click on this link and select your model printer todownload :-http://support.lexmark.com/index?page=home&locale=EN&userlocale=EN_US&segment=DOWNLOAD

Lexmark x7350 Drivers
Please visit the above link. Select the Operating System and download/ install the required drivers.

Hope it helps! Good Luck!
CreativeTECH

Try to the clean the nozzles of your color cartridge. Refer to this article in the Lexmark website on How to Clean the Print Cartridge Nozzles with the Lexmark X7350. If problem continues, try to insert a different known working cartridge to deternine if your color cartridge is faulty.