20 Most Recent Linksys BEFSR41 Cable/DSL Router W/4 Port Switch, Retail Box (DSLSBEFSR41) Questions & Answers


Access your router Setup page 
Open internet explorer go to http://192.168.1.1 (default) username: admin (default) password: "leave it blank" (default)
Go to Security go to Filter
if you know that Ipaddress of the computer you want to block for example 192.168.1.10
You can create up to five different IP Address Range filters   Users who have  filtered  IP addresses will not be able  to  access the  Internet at all   If you only want to filter one  IP  address instead of a range of IP addresses, enter the same  value into both fields  For instance, if you wish to filter the  PC with  the  IP  address of 192 168 1 5, enter 5  into both  fields on one line: 192 168 1 5 ~ 192 168 1 5 

if you know the MAC address of the computer click the Edit MAC Filter Setting and input the MAC address you want to block. 
blocking by MAC address is the most effective solution to block a computer... while blocking by ip address will be easily bypass by changing the ip add of the pc

then saved your settings and reboot..

Linksys BEFSR41... | Answered on Nov 27, 2019


Call Linksys Technical Support, if they cannot help try this http://technicalsupport.blog.friendster.com

Linksys BEFSR41... | Answered on Apr 21, 2017


You're asking for a schematic for a router. I doubt that the manufacturer will have one for a consumer "throw away" device. Most simple electronics like routers < $100 items now are considered throw away. I supervised one of the largest electronics service shops in the Denver area and even for us, some schematics were tough to get unless you were an authorized service center.
Sorry

Linksys BEFSR41... | Answered on Jan 16, 2017


Wireless router installation

Linksys BEFSR41... | Answered on Jun 29, 2016


its authentication number. which you will get from cable tv operator.
its not pin inside your router.

Linksys BEFSR41... | Answered on Dec 29, 2015


GO TO..Linksys.com..click suport..click on customer service..click product registration,RICHARDM69

Linksys BEFSR41... | Answered on Sep 06, 2015


Please explain your issue in detail

Linksys BEFSR41... | Answered on Jul 26, 2014


If you are trying to connect to an app at that IP address then you want to enter it like so: 192.168.1.10:5800

Linksys BEFSR41... | Answered on Dec 07, 2013


Connect a Ethernet cable from your PC directly to the router and try to open the page 192.168.1.1 with "admin" as user and password.

Linksys BEFSR41... | Answered on Nov 30, 2013


Hello =)
Are you trying to access the routers dashboard? If so, have you tried the default password? The default password is "admin". Leave the username field blank. Router default IP should be 192.168.1.1 but it might vary.
Hope this helps! :)

Linksys BEFSR41... | Answered on Aug 07, 2013


Log in to your NETGEAR router by browsing to http://www.routerlogin.net/ or http://www.routerlogin.com./ Enter the username (admin) and password. By default, the password is password or 1234 unless it has already been changed. If you cannot log into your router: Unfortunately, there is no way to recover a lost or forgotten password from a router or access point; you will need to reset the device to factory defaults. However, once the device is reset to factory defaults, you can use the default username ("admin") and password (either "password" or "1234" depending on your router) to reconfigure your router settings. If it is not visible, you can change your wireless passphrase; however, changing the passphrase will cause you to lose your wireless connection. Connect your computer to the router with an Ethernet cable before entering a new passphrase into the text box and Clicking Apply. If there is a small hole in the front or back of the router push a hair pin in to reset to factory settings.

Linksys BEFSR41... | Answered on Apr 09, 2013


To connect to your wireless router, the router's wireless settings needs to be configured with the SSID, encryption etc. and also the wireless cards in all the laptops/computers needs to be configured with these router's wireless settings. Then the laptops/desktop computers can communicate with your wireless router.
Connect a LAN cable from the Linksys to the LAN port on your computer.
Open a browser and enter the Linksys configuration URL
http://192.168.1.1
The default login = admin
The default PW = admin
You can protect your router by changing the default admin PW (write it down and put it in a safe place)
Go to the wireless configuration and set up the SSID and WPA or WPA2 encryption to protect your wireless network and Internet from unauthorized access.
Now apply these settings to the wireless card in your laptop/computer.
To secure your wireless network from unauthorized access, please click on this link and follow my instructions :- http://www.fixya.com/support/r3559128-wireless_router_security

Linksys BEFSR41... | Answered on Dec 25, 2012


Well, generally there are a variety of reasons that can cause the issues on your Mac. Meanwhile, there are certain ways through which you can do to fix one by one. However, if you prefer a more efficient way to resolve, try an all-in-one Mac speed up software as it can help resolve all issues in just a few clicks. Learn more: http://www.howtospeedupmac.com/

Good luck!

Linksys BEFSR41... | Answered on Sep 04, 2012


Under applications and gaming, you will want to select upnp forwarding and then you can enter whatever custom application you want to be allowed in or out.Upnp can also be set automatically from the Administration menu.
You will need to know which ports to use, usually you can get these from the software developer, such as bungie. You can also use the application name, but I find the numbers easier to work with.

Linksys BEFSR41... | Answered on Nov 09, 2011


does your router and your landline phone is in one connection in with a splitter..
does connection failed whenever there's a call?
if so your splitter might be broken
or you must insert your phone line with the splitter, it might be in your connection set up..
or make sure your utp cable is stable and not in exposure area of people or pet where it might be touch or something..

hope this helps...

Linksys BEFSR41... | Answered on Oct 17, 2011

Not finding what you are looking for?
Linksys BEFSR41 Cable/DSL Router W/4 Port Switch, Retail Box (DSLSBEFSR41) Logo

235 questions posted

Ask a Question

Usually answered in minutes!

Top Linksys Computers & Internet Experts

Prashant M
Prashant M

Level 3 Expert

2277 Answers

Ekse

Level 3 Expert

13434 Answers

Mike

Level 3 Expert

4369 Answers

Are you a Linksys Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Linksys Computers & Internet

  • Linksys Computers & Internet

Most Popular Question

mac laptop slow using our homes wireless

  • Computers & Internet
Loading...