20 Most Recent Logitech Traveller (980399-0403) Wireless Headset - Page 4 Questions & Answers

The soft clicking noises could happen for many reasons such as moving your headset around, tapping on any part of the headset or even the wire, but if it's for none of these reasons, then it could be because of a loose wire.

samsung ear speaker not working

The "trident" represents the outline of a speaker. Often, on will have a '+' sign next to it, an the other has a '-'. These, respectively increase and decrease the volume. The one with a cross through it mutes all sound. Pressing it again will restore sound.

Go to heighest building in your city and throw it

Sounds like its a loose connection inside the headset itself. this will happen. It could either be on the plug or in the headphone itself. An from experience its more of a hassly trying to fix it then its worth.

Hi Hrb2,
Either the MIC of your headset is bad or the ear-phone of your son's headset is faulty.
Try talking to some one else over this head-set. If he/she is able to hear you then your MIC is absolutely fine and the latter's is faulty. But if that person is also not able to hear you then the problem is with your MIC.
In that case, replacing the MIC is advisable.
Good luck and have a nice day.
Thanks for using Fixya.

the problem is from the mouthpiece of the headset,since its a newly acquired headset,its better you don't tamper with it techniclly,i will advice you return it to the point of purchase for a replacement,i believe it has a warranty

You need to put the headset into discovery mode. Hold down the multifunction button on the headset until the led flashes (ones I have seen flash blue and red while in discovery mode) You should then be able to see the headset on the PS3, try to pair with it and enter a pass key of 0000. Good luck

I personally owned this item, they were great until an inadvertant accident just slightly extended its coord a few days ago, greatly destroying all sound effects other than music. All you have to do to get yours to play sound out of the headset is go into the control panel option. from there, go to Sound. You will find that there are your speakers and your headset if plugged in. All you have to do is right click the headset icon and choose the option "Set as default device" or something to that nature. To be sure they are working properly, right click the icon again and hit the "Test" button, you should hear two jingles, each coming out of a distinguishable earphone. If you find your programs or internet pages not playing sound through your headset at first, simply close them and re-open them. I had the same problem and am now actively searching for my own 2nd pair to replace my poor broken ones =(. I hope my post helped you solve your problem. =)

Yes, bluetooth is a standard and, in principle, you should be able to connect across brands. That's the reason why standards are made. so, just give it a try and let us know if there is problem :)

Just in case you are referring to a hands free headset for cell phone and asking whether you can replace it with another, separate headset then the answer is yes.
You only need to set up the phone to accept a new Blue tooth device.

Wiring a fridge thermostat typically involves connecting the thermostat to the power source and the compressor. Here's a general guide for wiring a 3-pin thermostat:

1. Identify the Pins: The thermostat will typically have three pins labeled 4, 6, and 3.
2. Connect the Power Source: Pin 4 is usually the common (C) terminal, which connects to the power source. This could be the live wire from your electrical supply.
3. Connect the Compressor: Pin 6 is often the normally open (NO) terminal, which connects to the compressor. This allows power to flow to the compressor when the temperature rises above the set threshold.
4. Ground Connection: Pin 3 is commonly the ground (GND) terminal. This should be connected to the ground wire for safety purposes.