20 Most Recent
NetGear : WG111 54 Mbps Wireless USB 2.0 Adapter, RETAIL (DSNGWG111) - Page 5 Questions & Answers
Need to lock my wireless connection. how do I ?
Connect at the router's i.p. and change the password or passphrase at the wireless lan (or WiFi) section. In case you have not enter a password do it.
In case of a problem or clarification, don't hesitate to post me a reply.
If you are satisfied, rate my solution with the "thumbs".
Thanks and regards
Please kindly rate this solution
Stelios
direct FixYa link: http://www.fixya.com/users/technical114
Intenet connection droping repeatadly
Well, if the wireless connection is intermiitent then it is best to change the wireless channel on your wireless router.
Hope this allows you to resolve the issue.
Regards
Anand Gupta
Cant connect to our network
Hi, please perform the below task to configure settings on your computer:
1. Right click on My Computer icon and go to Manage.
2. Go to Services then go to Service and Applications.
3. Double click on Wireless Zero Configuration.
4. Change the Start Up Type to Automatic and click on Apply
5. Click on Start and press OK to close the window.
6. Go to 'Control Panel', Click on Classic View in the left hand side menu and then open 'Network Connections'.
7. Right-click on the wireless Network Connection icon and select 'Properties'.
8. Go to the 'Wireless Networks' tab .
9. Check the option 'Use Windows to Configure this Wireless Connection' and click 'OK'.
Now please perform the following instructions to connect to the wireless network:
1. Go to 'Control Panel', Click on Classic View in the left hand side menu and then open 'Network Connections'.
2. Right-click on the wireless Network Connection icon and select 'Properties'.
3. Click on the 'wireless network' tab.
4. Under Preferred networks if you see any name in the list then highlight the name and click remove. Click OK.
5. Right-click on the wireless Network Connection icon and select 'View Available Networks'.
6. Look for the SSID (aka Network Name) of the Wireless router or access point.
4. Highlight thee SSID from the list that you want to connect to.
5. Type the security Key here and click on the 'Connect' button.
6. You should have successfully established a wireless network connection.
Hope this allows you to resolve the issue.
Regards
Anand Gupta
My Netgear WG111v3 cannot connect to internet
Hi,
You need to do some wireless setting on router,
Please follow steps to fix your issue
1.Please changed network (SSID)name of router
2.Reinstall adapter driver
If you follow above steps defenately your issue would be resolved
2nd attempt failed
go to start, run, type in services.msc
scroll down to wireless zero confg (double click)
make sure the service is started and set to auto
then click apply
Netgear WG111v3 adapter keeps stopping
Please do not use the USB Extension cable that came with the adapter and instead connect the adapter directly to the computer on USB port. You may try connecting it to a diffrent USB port. Otherwise, please update the drivers for the adapter from the below link:
http://kb.netgear.com/app/answers/detail/a_id/12962
Hope this helps you to resolve the issue. Let me know if you need any further assistance.
Regards
Anand
Wireless connection - can not renew the IP address
Here's what you can do Sometimes you can simply right-click the computer icon in the task bar near the clock of your XP desktop (If this icon is present). This will go through a process of resetting your IP address.
But if you do not have this option, you can go to START>RUN and type cmd. At the command line type ipconfig /release (or winipcfg /release in earlier versions of Windows). Then hit ENTER. Next, type ipconfig /renew and you should get a new IP address from the router.
If this doesn't work, renew the IP address. You will have to nullify the IP address on the PC, then shut the computer down. Next, unplug the cable modem for a couple of minutes, then plug it back in again. Once all of the modem lights are green, power up the PC again. It should automatically renew its IP at boot.
Unplug the router, then plug it back in AFTER you plug in the modem, but before you power up the PC. The router will need to supply the PC with a new IP address. Good luck, hope this helps or gives you something to try.
Hi, I think that my adaptor got a bend in the
Hi,
If your adapter is bend and it is not detected by computer
it might be faulty and if it is under warranty call 1888-NETGEAR(US) or check the contact no of Netgear for Replacement.
else you have to go for a new adapter
i wud prefer you if you want to go for New adapter that support WIN7
- WN111v2
- WG111v3
Netgear WG111 USB adaptor does not work
-- check the device manager of your computer
-- for win xp - go to right click on my computer - manage - computer management - device manager - on the right hand side that the netgear adapter is listed under network adapters or other devices
-- check the status that its working properly
-- then upgrade the latest drivers ...
-- follow the link ::
http://kb.netgear.com/app/products/model/a_id/2556
and try to connect ..
Connection Interrupted periodically
To rectify the intermittent wireless connection, you will have to change the wireless channel on your wireless router. The channel that the router is using is getting interfrence causing your wireless connectioin to drop.
Hope this helps you.
Regards
Anand
Not finding what you are looking for?