20 Most Recent NetGear : WG111 54 Mbps Wireless USB 2.0 Adapter, RETAIL (DSNGWG111) Questions & Answers

Dear Customer,

Yes It will happen,cause of protocols handling on router with your main pc,

SO,try to use another higher configured pc or you can use server like pc,

Never try to handle router on lower configured pc ,its affect on you r work ,its defanetly very slow-down you work,

SO try my solution you will get more speed,


NetGear : WG111... | Answered on Apr 07, 2019


Go to

type in WG111 ( v2 will show up)

select Software Version 4.0.0 for Windows

on right hand side right below and you will be fine

Good Luck

NetGear : WG111... | Answered on Dec 28, 2017

Call your ISP and have them reset/clear the connection. It sounds like your MAC address is locked and they can correct that.

NetGear : WG111... | Answered on Jun 07, 2017

I cant help sorry

NetGear : WG111... | Answered on Mar 29, 2017

This means the DHCP service is not enabled on the wireless router.

either enable the DHCP service on the wireless router


Give a static IP onto your wireless NIC card ( Netgear N150 Wireless usb adapter )

NetGear : WG111... | Answered on Jan 21, 2016

please download latest driver from following link and install in computer


NetGear : WG111... | Answered on Dec 02, 2015

That is because your have installed some proprietary software to control the wireless connection, and windows cannot use it.

So you get no connection.

Remove the surplus software and let windows take care of the connection, this should solve the problem.

NetGear : WG111... | Answered on Mar 08, 2015

This a wireless adaptor, not a router.

You need to use the correct driver software for the Apple Mac.

from Here


NetGear : WG111... | Answered on Mar 08, 2015

I had the same problem and when checking the properties of the adapter under device Manager.

I found the under the Power Management Tab the option to

"Allow the computer to turn off this device to save power" was turned on.

Remove the check mark from this option and click OK.

NetGear : WG111... | Answered on Jan 06, 2015

The Question is not clear. Pls be more specific

NetGear : WG111... | Answered on Jan 06, 2015

Hello, welcome to fixya support. If you have the driver of the device already installed, you can disable it completely from the control panel.

For windows 7:
Go to Start-->Control Panel-->Device Manager-->Expand the group named "Network Adapters" find the one corresponding to your netgear device, then right-click on it and click Disable.

Also, you can check for it in the group "Universal Serial Bus Controllers". As mentioned previously from Control Panel , expand that group and if you find a corresponding driver related to netgear adapter, just right-click on it and "Disable".

In case that you already have netgear software installed along with your USB adapter, please disable the radio function from there.

More info on this can be found from the user manual (relevant pages 27, 33, 34).
Download from here:

NetGear : WG111... | Answered on Aug 29, 2014

you may have to reset the wireless network and the computer and restart the network first then the computer

NetGear : WG111... | Answered on Jan 27, 2014

Uninstall the AVG program or see what the firewall settings are.

NetGear : WG111... | Answered on Nov 24, 2013

7_27_2013_4_50_59_pm.gifIf your computer has an SD slot, just save the drivers to an SD card, then plug it into the computer that needs the drivers. No need to burn a CD for just a single driver.

NetGear : WG111... | Answered on Jul 27, 2013

Hope this helps.
Ch.1 Basic Setup includes Installation and Connection.

NetGear : WG111... | Answered on Oct 26, 2011

Best option may be to use a computer with an internet connection, go to netgears website, locate the product you own and download the driver onto a thumb drive and use that file to install the driver on the computer with the wireless adapter.

NetGear : WG111... | Answered on Jul 27, 2011

Go to Netgear's support site here http://support.netgear.com/app/home/session/L3NpZC9wWTFnQzN5aw%3D%3D

You'll need to know the letter that follows the wg111 to pick your model then you should be able to find the driver for your operating system and download it.

NetGear : WG111... | Answered on Jul 03, 2011

windows should be able to look after that dongle for you, just plug it in

NetGear : WG111... | Answered on May 20, 2011

Not finding what you are looking for?
NetGear : WG111 54 Mbps Wireless USB 2.0 Adapter, RETAIL (DSNGWG111) Logo

300 questions posted

Ask a Question

Usually answered in minutes!

Top NetGear Computers & Internet Experts


Level 3 Expert

13434 Answers


Level 3 Expert

4369 Answers

Jeffrey Groves
Jeffrey Groves

Level 3 Expert

573 Answers

Are you a NetGear Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

WG NetGear

  • WG NetGear

Most Popular Question

netgear 111v3 usb linksys wireless

  • Computers & Internet