20 Most Recent NetGear Super G WGT624SC Router (DHWGT624SCNA) - Page 9 Questions & Answers

Look on the label at the back of he router.

This is the page you want, connecting the modem and the router needs to be done through the WAN/Internet Ethernet port. http://support.brighthouse.com/Article/Connect-Computer-Router-6628/?searchid=321247&pos=1

Linksys Or Cisco

You need to ask Lenovo support why it does this, as it is not normal. Are you sure it is not asking for the password number? This you need to get from the router as it depends on the protocol used. If it is your router you should already have the password.

If the printer is connected via wireless it may not be set up correctly, as a network printer. Connect it up via a USB cable to make sure it works, then change it to Wireless configuration and re-install it as a network not a USB printer.

Replace it, it is obviously faulty.

Here is the manual http://www.downloads.netgear.com/files/DM111P(U)v2_UM_06Oct08.pdf

Page 64, you can block the internet site by keyword of "facebook" See manual http://www.downloads.netgear.com/files/FVG318_RM_09Oct07.pdf

It is not compatible with a netgear router because they do the same job, one on broadband and one on 3G HSPA. Two routers do not connect to each other.

The problem is towards the ISP connection. Contact the ISP with the problem.

The computer does not support WPS.

Try the label on the back of the router.

Is it connected via cable? If so disconnect the cable, if you want it to work wireless.

Try the label at the back of the router.

Look at the label at the back of the router.

Netgear does not require a country code!

Have a look at the back of the router.

Reset Microsoft Internet Explorer back to default settings to clear the problem. Pick tools (Alt +T), then settings then advanced Tab. At the bottom is the restore settings to default button. Press it. then Apply and OK to exist settings.

Yes, you need to use the correct SSID, ask the owner. Also you need to set up the correct protocol to use the password.

Check the "break in the connection with the modem". The failure is coming from outside the router, towards the ISP's connection.