20 Most Recent NorStar M7324 Telephone - Page 9 Questions & Answers

assigning messages is done by
feature 983>1020000>AA>Table>table 1>Greeting Type morning:1, afternoon:1, Evening:1 and Non-business:1.
set the greeting type as morning:2, afternoon:2, Evening:2 and Non-business:2
Don't forget to change it back to "1's" after the holidays.

You can either do a button inquiry in each of the extensions to see which extension number is associated with which name. that is done by going to each set and pressing feature *0 then pressing the intercom key. or you can look through set programming to find out.
Programming is done on 7310, 7324 and 7316 type sets.
Enter programming by pressing the feature key followed by **266344.When prompted to enter the password enter 266344.
The screen should say TERMINALS&SETS. The 4 top line/feature keys are now used for programming.
At the terminals&sets prompt, press the show key (top right arrow).
The display should now ask for an extension number. Press the list soft key.
It will list the extension number followed by the name for the first extension.
Press the next key for the next extension (bottom right arrow) .
Press the release key when finished

You can have the messages change using the greeting time tables, or you could record a seperate greeting and manualy change it from the standard greeting to the holiday greeting and back again at your leisure.

yes, you may change the ext's vmail name spelling by going inbto f983 1020000, going thru the individual mailbox's and changing the name as it is spelled. this is what the directory looks at.

You will need to go inthru f**config config. go to terminals and sets, select set, then go to capabilities and here select the ring no answer to the vm pilot # if you are unsure of what this is look at another ext that works. set the # of rings and the phone will not go to vm.

YOu will need to go in thru f 983, 1020000. then go to AA then on to greetings. here you can re-record.

Fisrt go into programming on main tel set by pressing feature ** 266344 then password is 266344 this takes you to configurationpress show key whit the little overlay on the keys that came with your phone system. Press next till you get to miscellaneous press show then next till you get to direct dial number press show enter local you want to have direct dial 0. This will allow that local to ring when a zero is dialed from any phone internal or external. hope this help.

Changing programming on a Norstar system must be done using a display phone. Using a M7310 or T7316 the right 2 buttons under the display are "NEXT" and "SHOW" respectively.

1.- To enter programming mode press "FEATURE" and "* * 2 6 6 3 4 4"
2.- Enter password (default = 266344) - display should read "Terminals & Sets"
3.- Press "NEXT"(bottom right arrow) - display should read "lines"
4.- Press "SHOW" (top right arrow)- display should ask for a line number
5.- enter in the line number you wish to change the supervision on in a 3 digit format. ex. line 1 = 001
6.- press the show key (top right arrow)
7.- The display should say Trunk/line data
8.- Press "show"(top right arrow) - display should read "trunk type"
9.- Press the next key (bottom right arrow) 7 times"
10.- the display should say "trunk mode: unspr"
11.- Press softkey "CHANGE" to "super"
repeat steps 5 - 11 for the remainder of the lines Press the Rls key when finished

Changing the time on a Norstar system must be done using a display phone. Using a M7310 or T7316 the right 2 buttons under the display are "NEXT" and "SHOW" respectively.

1.- To enter programming mode press "FEATURE" and "* * 2 6 6 3 4 4"
2.- Enter password (default = 266344) - display should read "Terminals & Sets"
3.- Press "NEXT"(bottom right arrow) 5 times - display should read "Time and Date"
4.- Press "SHOW" (top right arrow)- display should read "Hour:___"
5.- Press softkey "CHANGE"
6.- Enter hour - display should read "AM OK or Change"
7.- Select AM or PM
8.- Press "NEXT"(bottom right arrow) - display should read "Minutes:___"
9.- Press softkey "CHANGE"
10.- Enter minutes
11.- Press "NEXT"(bottom right arrow) - display should read "Year:___" 12.- Press softkey "CHANGE"
13.- Enter year
14.- Press "NEXT"(bottom right arrow) - display should read "Month:___"
15.- Press softkey "CHANGE"
16.- Enter month
17.- Press "NEXT" (bottom right arrow)- display should read "Day:___" 18.- Press softkey "CHANGE"
19.- Enter day
20.- Press "NEXT" (bottom right arrow)
21.- Press the Rls key

hooking up overhead paging

to reset the administrator pasword enter feature 985 press 9, at the password prompt enter 73738767793 (resetsmpwsd) and press ok or #,press yes to reset password. password should be defaulted to 0000. then try Feature 983. if your system has 2 digit intercom #s your password is 120000 if your system has 3 digit intercom #s your password is 1020000.

Programming should be done from the M7310, M7324 or the T7316E set. Administration access code: Feature * * 2 3 6 4 6 which also is Feature * * A D M I N.
If asked for a password enter the same 2 3 6 4 6.

If that doesn't work you may have the newer Compact ICS or the Modular 0x32 control unit which will be Feature * * 8 4 6 3 which is T I M E. Password is 2 2 7 4 2 which is B A S I C or A D M I N which is 2 3 6 4 6.
When in programming just press the next button(lower right arrow) until you see what you want to change. Then press show ( top right arrow) ,then change if you want to change it. If you pass it, press back (lower left arrow)
Example: To change the Time & Date Press next until you see Time & Date. Then show Then Chng Then change again, change it if you need to, Then next again until you see what you need to change. For example; only the hour needs to be changed for day light savings time. Just press next until you come to the Hour. Then Change it. Then press release RLs when your done.

Programming is done on M7310, M7324 and T7316 sets.
To set up ringing you need to enter programming by pressing the feature key followed by **266344.When prompted to enter the password enter 266344.
The screen should say TERMINALS&SETS. The 4 top line/feature keys are now used for programming.
At the terminals&sets prompt, press the show key (top right arrow). The display should now ask for an extension number. Enter extension number you wish to program ringing on. Press the show key (top right arrow)
The display should sat LINE ACCESS
Press the show key (top right arrow) .
The display should say LINE ASSIGNMENT.
Press the show key (top right arrow) .
The display ask for a line number. press list
The display should say line 001: appear only
press the Chng key till it says appear & ring
press next key (lower right arrow)
The display should say line 002: appear only
repeat the procedure the same as line 001 for the remaining ringing lines

press the release key when finished

Programming is done on M7310, M7324 and T7316 sets.
To set up ringing you need to enter programming by pressing the feature key followed by **266344.When prompted to enter the password enter 266344.
The screen should say TERMINALS&SETS. The 4 top line/feature keys are now used for programming.
At the terminals&sets prompt, press the show key (top right arrow). The display should now ask for an extension number. Enter extension number you wish to program ringing on. Press the show key (top right arrow)
The display should sat LINE ACCESS
Press the show key (top right arrow) .
The display should say LINE ASSIGNMENT.
Press the show key (top right arrow) .
The display ask for a line number. press list
The display should say line 001: appear& ring
press the Chng key till it says appear only
press next key (lower right arrow)
The display should say line 002: appear &ring
repeat the procedure the same as line 001 for the remaining ringing lines

press the release key when finished

Huh? The last RCA plug I looked at had 2 wires, a center pin and a shell. I'm pretty sure it's not polarized, so connect one wire to one wire and the other to the other.

Carl

use password reset disk... Download software from web and install on pendrive and boot it on system starts

Usually there will be a plus and minus button on the side of the headset.By hitting the button with the plus on it your volume should increase.Hope it helped

Go to this phone press feature 983 this takes you to admin change mail box .The general mbox is 100 this is the mbox you want to change

Hi,

Have you try to re program or register again the voice mailbox again on your base phone?

Hi there,

1. Enter Feature 983
2. The display will show “LOG“, now you suppose to
enter the password
3. Enter “10020000“
4. Display will show options MBOX AA OTHR
5. Press soft key under MBOX
6. New menu will show on display ADD DEL CHNG
7. Press soft key under CHNG
8. Enter the extension number you wish to reset Vmail password
9. Once you entered the extension number display will show two options RESET and NEXT
10. Press soft key under RESET and display will show message PASSWORD RESET
11. Press release button on the phone and user’s Vmail password is now reset to default 0000
12. Done
that will also reset the messages.....

Good Luck!!

Thanks