20 Most Recent RCA 20F511T TV - Page 2 Questions & Answers


There is a red drive issue going to the picture tube. Being that the problem could be anywhere from the signal processor to the picture tube itself it is hard to say exactly where the problem is. There are a lot of parts between the signal processor and the picture tube. Have a shop check it out for you. Thanks for using fixya.

RCA 20F511T TV | Answered on Dec 14, 2009


Some RCA models had problems with there degauss circuits drawing to much current at turn on. You can change the fuse to see if it will work for a while. If it immediately blows the fuse at turn on or at plug in, there is a hard short somewhere. If it works for a while and blows the fuse again, take it to a repair shop and have them modify the degauss circuit. An up to date shop will know what to do. Should not be expensive.

RCA 20F511T TV | Answered on Oct 15, 2009


If it's the top half that's lines and the bottom is ok, it's a problem in the vertical deflection circuit. Probably a dried out electrolytic capacitor.

If it's left to right, that gets more complicated. Please provide more info.

RCA 20F511T TV | Answered on Feb 28, 2009


Hi

you need to replace all tact switches at the control panel

Thanks!

RCA 20F511T TV | Answered on Feb 25, 2009


i need 2 get my tv off of momo

RCA 20F511T TV | Answered on Feb 02, 2009


rca fpa will not trun off plz help me trun it off
i nedd help plz
ty for your help
betty

RCA 20F511T TV | Answered on Jan 30, 2009


HELLO.! IT SOUND'S LIKE A POWER SUPPLY PROBLEM TO ME.!!! & FOR THE TIME YOU WILL PUT IN TO IT & THE MONEY .!!! YOUR BETTER OFF GETTING A NEW SET.!!!HOPE THIS HELP'S YOU.!!!"GOOD LUCK"

RCA 20F511T TV | Answered on Jan 23, 2009


Is there a color button on your T.V? Maybe someone bumped it. You know, like on the old Macs. I know your tv is new, but there might be a button. check.

RCA 20F511T TV | Answered on Jan 08, 2009


How do u get the Fpa unlock cuz i just got cable

RCA 20F511T TV | Answered on Dec 05, 2008


chennels board is cut just solting its conect

RCA 20F511T TV | Answered on Aug 24, 2008


The main power supply section is not working.
(standby supply is OK)
Common possibilities are:
- High-voltage section (flyback transformer) has failed
(happens sooner or later, about 8 years typical))
- CRT tube has failed overloading the supply
- Power surge has popped the power input circuit.
(Fuse, rectifier diodes, turn-on relay etc)
- One of a hundred of electrolytic capacitors has failed short overloading the supply. They dry out with age, are cheap to replace, but hard to find which one it is.
- Or any of many other possibilities.

In short, you need a experianced tech to troubleshoot this.

RCA 20F511T TV | Answered on Aug 12, 2008


HELLO.!!! TELL ME WHO IS THE REMOTE MADE BUY!!!.? & WHO IS YOUR SET MADE BUY.!!! ? AND THE MODEL NUMBER OF YOU SET.!!! I NEED TO KNOW THESE THING TO HELP YOU.!!! "GOOD LUCK"

RCA 20F511T TV | Answered on Aug 11, 2008


HELLO. YES IT'S TRUE ALL TV MUST BE ON TO PROGRAM THEM.!!! AND ALL MOST SET THAT HAVE A CHILD LOCK ON THEM .!!! YOU MUST HAVE THE REMOTE FOR THAT SET.!!! TO MAKE IT BRING UP THE MENU DISPLAY.!!! TO TURN ON & OFF.!!! THE CHILD LOCK..!!! THERE ARE SOME UNIVERSAL REMOTE'S THAT WILL FOR MOST .!!! TRY A (UNVERSAL CONTROL ONE) REMOTE .!!! THEY WORK WITH MOST OF THE RCA SET MADE.!!! HOPE THIS HELP'S YOU .!!! "GOOD LUCK"

RCA 20F511T TV | Answered on Aug 11, 2008


HELLO. IT SOUND'S LIKE A POWER SUPPLY PROBLEM TO ME OR IT COULD BE IN THE TUNNER.!!! OF YOUR SET.!!!YOUR BETTER OFF GETTING A NEW SET.!!! HOPE THIS HELP'S YOU.!!! "GOOD LUCK"

RCA 20F511T TV | Answered on Aug 11, 2008


hello. it sound's like you have a picture tube that is shorting out from a something arking in side of your set.!!! eather on the (CTR PIN COUSHION).!!! OR ON THS CHASSIE.!!! THAT WHAT MAKING IT DO THAT.!!! TIME TO GET A NEW SET.!!! HOPE THIS HELP'S YOU.!!! "GOOD LUCK"

RCA 20F511T TV | Answered on Aug 11, 2008


Sounds like you have a button on the control panel that is sticking in the "on" position. I had set in my shop the other day and someone had gotten baby powder spilled into the buttons. I had to replace all the buttons (switches). If a button goes bad these sets will go crazy! I know from experience! Stargazer

RCA 20F511T TV | Answered on Jun 25, 2008


ask google but I doubt they will work together

RCA Televison &... | Answered on Feb 16, 2020


If you wish to get some details; check the site linked here. Pull up older posts. http://electronicshelponline.blogspot.com/
Search the site by type in the brand in its search box.

RCA Televison &... | Answered on Feb 12, 2020


Try these codes. [1294, 1285, 2106, 2176]. If you wish to get more details; check the sites linked here. It has set-up code list & set-up procedure to many popular brand remote controls. Common set-up codes to check with TVs and other devices are given, in the order of the "device's brand name list" in alphabetical order. Pull up older posts. Surf the site with patience. Surf the sites by type in the brand name to your set, in its search box.
http://electro-medical.blogspot.com/
http://remotesearch.blogspot.com/
http://electrohelponline.blogspot.com/
http://electronicshelponline.blogspot.com/

RCA Televison &... | Answered on Feb 12, 2020

Not finding what you are looking for?
RCA 20F511T TV Logo

Popular Tags

53 questions posted

Ask a Question

Usually answered in minutes!

Top RCA Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76237 Answers

matt martin
matt martin

Level 3 Expert

1257 Answers

Cindy Wells

Level 3 Expert

6073 Answers

Are you a RCA Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

RCA Televison & Video

  • RCA Televison & Video

Most Popular Question

rca television gos off channel surfs

  • Televison & Video
Loading...