20 Most Recent Samsung (SH-M522C/BEBN) CD-RW/DVD-ROM Combo Drive - Page 2 Questions & Answers

Hi rrcholan,

• Optical drives never require a driver when used in Windows other than the one packaged with the OS. So, I would take the following steps.
• First, open the device manager, uninstall the sh-m522c, then

• Download and install CCleaner (free) from Piriform- http://www.piriform.com/ccleaner
  

• Run the cleaner to remove old un-needed temp files
  

• Select the StartUp tab and look for any programs that you know you installed but no longer use or need, and disable them. Caution, do not disable any system files unless you absolutely know what they do and that you do not need them.
  

• Run the Registry cleaner, when asked if you want to backup the registry, select YES, and save to a file you will remember just in case. I have used this program hundreds of time on many different system and it has never caused a problem, but you want to be safe, backup the Registry.
  

• If asked about a particular file that it wants to clean, select "yes to all"
  

• Reboot
  

  Windows should see the drive and reinstall the drivers.
  

  If this helps resolve your issue, would you please rate the solution. If this does not help, please leave a comment giving me more information on the problem and I will try to help you further.
  

just change your data cable and replace a new data cable, your problem will be resolve.

Good Luck

is it your computer screen that is black

One bad lead can cause a computer to continue on a cycle or to shutdown or fail to detect/ boot up a computer hard drive

Test all leads that attach to your hard drive including electrical extensions,IDE,SATA

the leads from your ((motherboard to your hard drive)) make sure they have a secure connection and are not faulty or just replace them there probably old and faulty make sure all leads that are attached to your drives dvd\cd 3 1/2 inch floppy have secure connections and are not faulty even the electrical extensions or just replace them they are probably old and faulty a computer needs its connections to have an end so any faulty leads will end up with a computer error

hope this will help don

make sure that the cd-rw/dvd is getting enough power test all leads that are attached to the dvd burner including electical extensions and make sure they have a secure connection or just replace them there might be bad/faulty or your drivers may have been corrupted or you might have a virus run your antivrus program you might have to physically unplug the leads for this cd/dvd burner then plug them back in or you might have to uninstall then reinstall your DVD/CD or uninstall the driver then reinstall for this device click start control panel administrive tools,computer management,device manager scroll down cd dvd rom drives right click you can you can update driver,roll back driver,or select properties general troubleshoot, select driver click to reinstall drivers click update driver or uninstall then reinstall if this does not fix the problem it might be a registry problem Close all open programs

Click on Start, Run, and type regedit and press Enter Click on the plus signs (+) next to the following folders

HKEY_LOCAL_MACHINE

SYSTEM

CurrentControlSet

Control

Class

{4D36E965-E325-11CE-BFC1-08002BE10318}

This folder is the DVD/CD-ROM Drive Class Description in the registry. Look for any of the following names in the right hand column.

Upper Filters

Lower Filters

Upper Filters.bak

Lower Filters.bak

If any of the above keys shown in step 4 are listed, right-click on them and choose DeleteAfter deleting the keys, close the registry editorReboot your computerOpen My Computer and check to see if your CD or DVD drives have returned. You may also want to open Device Manager and verify that the yellow exclamation and error code on the CD or DVD drive is gone.

hope this helps

make sure that the cd rom is getting enough consistent power test all leads that are attached to the cd rom including electical extensions and make sure they have a secure connection or just replace them there might be bad/faulty or your drivers may have been corrupted or you might have a virus run your antivrus program you might have to physically unplug the leads for this cd rom then plug them back in this will activate found new hardware wizard hope this helps or you might have to uninstall then reinstall your cd rom or uninstall the driver then reinstall for this device if this does not fix the problem might be a registry problem control panel admistrive tools,computer management,device manager scroll down cd dvd rom drives you might see a yellow question mark ? right click you can you can update driver,roll back driver,or select properties general troubleshoot, select driver click to reinstall drivers click update driver or uninstall then reinstall if this does not fix the problem it might be a registry problem if you cant see your disk drive in windows explorer Close all open programs

Click on Start, Run, and type regedit and press Enter Click on the plus signs (+) next to the following folders

HKEY_LOCAL_MACHINE

SYSTEM

CurrentControlSet

Control

Class

{4D36E965-E325-11CE-BFC1-08002BE10318}

This folder is the DVD/CD-ROM Drive Class Description in the registry. Look for any of the following names in the right hand column.

Upper Filters

Lower Filters

Upper Filters.bak

Lower Filters.bak

If any of the above keys shown in step 4 are listed, right-click on them and choose DeleteAfter deleting the keys, close the registry editorReboot your computerOpen My Computer and check to see if your CD or DVD drives have returned. You may also want to open Device Manager and verify that the yellow exclamation and error code on the CD or DVD drive is gone. hope this helps

just go through your motherboard cd to install all supporting drivers for windows Xp !!

n enjoy by your sound box !

make sure that the dvd burner is getting enough power test all leads that are attached to the dvd burner including electical extensions and make sure they have a secure connection or just replace them there might be bad/faulty or your drivers may have been corrupted or you might have a virus run your antivrus program you might have to physically unplug the leads for this cd/dvd burner then plug them back in or you might have to uninstall then reinstall your DVD/CD or uninstall the driver then reinstall for this device control panel admistrive tools,computer management,device manager scroll down cd dvd rom drives right click you can you can update driver,roll back driver,or select properties general troubleshoot, select driver click to reinstall drivers click update driver or uninstall then reinstall hope this helps

What must I do to slove this problem?

try these steps

) Close all open programs
2) Click on Start, Run, and type REGEDIT and press Enter
3) Click on the plus signs (+) next to the following folders
* HKEY_LOCAL_MACHINE
* SYSTEM
* CurrentControlSet
* Control
* Class
* {4D36E965-E325-11CE-
BFC1-08002BE10318}
4) This folder is the DVD/CD-ROM Drive Class Description in the registry. Look for any of the following names in the right hand column.
* UpperFilters
* LowerFilters
* UpperFilters.bak
* LowerFilters.bak
5) If any of the above keys shown in step 4 are listed, right-click on them and choose Delete
6) After deleting the keys, close the Registry Editor
7) Reboot your computer

there could be a problem with the usb check if you are able to use any other humb drive or flash drive on the sysem if none is getting detected then just go to device manager and uninstall all the usb drivers and then resart the system it will get installed automatically nothing to worry then you can again try and see if it gets detected in the system tray and als after it gets detected install the dvd software to use it to write/read

It's not CSM/SLA. The letters CSM are directly over SLA, and they are vertically read as CS, SL, MA -which stand for Cable Select, Slave, and Master. They are found on IDE drives as the jumper points. Depending on where the drive is connected on an IDE cable, the jumper should match accordingly. CS is often used for either, preferably when there are no other devices on a single IDE cable.

please

You may need to update the firmware if the DVD is much over a few years old, then it simply may not be communicate right with the PC.
I have found that many of the "Older" DVD's CD simply do not work, with some modern PC's.
First though you need to establish if the DVD actually works, at all. to do this you need to really have it work in a generation of machine that it was made for, now if it works there, then it's most likely firmware that's stopping it, however if it doesn't work, there, either, the the answer is then obvious the DVD is faulty.
Over the years I have found, that 9/10 if the attached devices don't "Just Work" then there is a fault with the actual device, when they work, properly, it is easy to set them up, any problem usually mean a bad device. Sometimes it can be a setting etc, but most times i find, it is the device.
All one can ever really do, is try the suspected faulty on another PC, see if the "Fault" follows the DVD, if it does, then the DVD is faulty, if it works, on one PC, but not on another, then it may be a setting, or Firmware upgrade is needed. you need to check out the Samsung website for any Firmware upgrades, also trawl the net too... that's of course if you need it.

You could pay a qualified technician $25 to $50 to try to trouble-shoot the problem, or you could buy a brand-new CD/DVD reader/writer for $40, to replace your "failing" device.

Your choice ???

the lens has lost its potential to read DVD... it is a common problem in Combo players... if you drive is in warranty you can ask for a replacement... or else add another drive to your computer... because repairing the drive will never make it to work better...

if the size of the disc is showing 0 bytes and dvd is not read, try cleaning the lens of the drive and if it does not read the dvd, then try upgrading the firmware of the drive from
http://liggydee.cdfreaks.com

Yes Samsung does provide satellite receivers in its product family,

Here are some samples

DSB-B350V

DSB-B350W

DSB-B270V

DSB-150F

These receivers can be seen on Samsung website promoting Sat Receivers

http://www.samsung.com/global/business/settopbox/productSubType.do?ctgry_type=37&ctgry_subtype=50


The receivers produced today have a huge capabilities compared to what was offered 30 years ago when the craze started. These were the isolated communities that started to recognize the difference between Cable and Sat entertainment. You could freely tune into raw signals mobile units sent out like football games and similar new mini casts. Now the receivers along with proper reception capabilities, your reception dish and the quietly of your reception head. It all depends on what you want, 100 channels or 3000 channels?

The manufactures like Samsung have been providing the ability to receive NTSC & PAL signals and watch in the format you utilize depending the region of the world you are. Except for the US Market, this is because the entertainment originated in the US so why offer something not needed. Now with the worldwide internet and the ease of manufacturing a signal unit able to operate on any voltage system

110-240 at either on 50-Ghertz or 60-Ghertz cheaper and the simplicity can produce a higher quality dependable product. So even the US market is able to benefit finally from conversion capable reception from either DVD players or Sat receivers, including DVR recorders. As for your Net-Share or being able to receive free signals, Samsung is able to receive general signals provided free, not really difficult to set up a system to be capable of this, but you are still limited as to the actual amount of channels available. I think you’re more interested in receiving your entertainment without the annoying charges and monthly key updates necessary to view a provider’s decision on what it rebroadcasts from the entire amount of original broadcast they actually receive.

ZQDesign

Short for Compact Disc-Read-Only Memory. this where are CD/DVD's are being read by computers. If you need further help, reach me via phone at https://www.6ya.com/expert/elixirjose_00375ea24bd8141b