Samsung SyncMaster 550S Monitor - Answered Questions & Fixed issues

You can try lowering the refresh rate to a lower value. Ex. from 100Hz to 60Hz

Take it into a repair shop and say a capacitor has gone. It isn't a big job. The part itself is a couple of $

very possible that you will have to down load the driver screen get the samsung web site up find the model of the screen and the operating system on the computer and download it

SCHEMA MONITORU D1025HE DELL

Here are the instructions to open the monitor:

http://josepino.com/?open-samsung-back-cover

"Don't kill yourself just to save some bucks"

Good luck.

BAD NEWS THE PICTURE TUBE IS WEAK THE ONLY FIX IS TO REPLACE YOUR MONITOR WITH A NEW ONE

This is a bit tricky, but not impossible.
1. Remove the two visible screws near the bottom. 2. Pull the plastic covers off the stand: Pull from the inside (nearest where the stand is attached to the monitor. 3. Undo the screws and remove the bracket. 4. Under the bracket is the final screw. 5. Try pulling the front off the back starting at the bottom. It'll require a little force. 6. Now you should be able to get a knife in to pull the rest of the case off. Leaver by pushing the front outwards and back inwards and the clips should come off ok.

Try using the brighten controls in the monitor.

That is caused by absence of the vertical signal, more likely to be a problem with a semiconductor (specially a transistor) broken inside the display. Also, it may be caused by a "cold joint" or a problem with the solder. Heat caused by the "excessive" use of this monitor causes the joint to fail.

It's easy to open, just insert a flat screwdriver in each top slot and push it until it "clicks".

Complete instructions and photos at:

http://josepino.com/?open-samsung-back-cover

Good luck.

How do you change the bulb on viewsonic monitor 19" model VX900? Where can I get a new replacement bulb?

It sounds like you are in the Store Demo Mode. Turn it off and see if that fixes it. https://www.manualslib.com/manual/145519/Samsung-Syncmaster-Fx2490hd.html?page=27 Reset

Reset Samsung FX2490HD LS24F9DSM to factory state

monitorsfaq.com https://www.monitorsfaq.com > Factory reset > Samsung How to restore or reset Samsung FX2490HD LS24F9DSM. Reset to its factory state Samsung FX2490HD . How to hard reset monitor. Clear all settings or format. ..

The connecting cable or the video card would be the first suspects. Try a different cable to connect the monitor first, if there is no change, the video card in the computer would be second to look at. Can simply connect a different monitor to your computer to troubleshoot this. If the testing monitor works, it will be the graphics card that is the issue.

5 year old hyjacker, vinay. you forgot to say connected to what? is the screen only dim or dead.? even more important clue. RTM read page PDF 17, ? the OSD screen must work or the monitor is dead http://downloadcenter.samsung.com/content/UM/201205/20120517112305649/SA10-04Eng.PDF base pages https://www.samsung.com/us/support/owners/product/lcd-monitor-a10-series

Press the auto key of your monitor to get the best fitted resolution for your window, each monitor has a limited graphic capability of which it is designed. if the production is not ok consult your manufacturer.

try here Download Center Download Software Firmware Drivers Manuals Samsung

If your motherboard doesn't have a VGA connection, then that means it most likely does not have an integrated video card. If this is the case, then you will have to purchase and install a video card. It is very easy and your local Best Buy should be a great resource. The geeks there are usually very enthusiastic about explaining how to do it. I use to order from newegg.com, but they have become very commercialized and overpriced, like Best Buy. You can check tigerdirect.com or my favorite Amazon.com. Best Buy will price match any items they sell, including those on Amazon. If you need further help, I’m available over the phone at https://www.6ya.com/expert/jason_3e83613ef5f2a68b

I would suggest trying your xbox on another monitor to be sure the xbox is not the problem.

you need to give a bit better details as to what is happening

Most new LCD tv and monitors color,brightness,vert.hold, horz.hold,resolution, ect., are all controlled by a single programmed EEPROM, that costs more to replace than a new monitor/tv. You pay for the programming, not the chip.