Samsung TV Remote Control - Page 7 - Answered Questions & Fixed issues

You can get it from most of the electronic spare part selling shops at your town.

To which device do you want code? TV? Set top box? Sat receiver?

I have the same problem. LED doesn't blink and I've held it down for ages!

i have an old solo tv - visa electronic remote that i would like to set up for my Hitron tv (samsung), but i lost the my book to help me set it.

Hello
Try it with new batteries once again. If you fails, the remote control needs cleaning. the procedure for cleaning can be get from this link.
http://www.fixya.com/support/r10192276-cleaning_remote_control_handsets

the codes are normally provided inthe manuals so if you dont have one you can consult the electronics daelers near you

Hi,

You need to be quick when you select double digit channels i.e press 3 then 2 quickly to access channel 32. Otherwise the equipment will only recognise the first digit that you pressed.

If this does not work then we need more specific information on what equipment you are using - TV make and model - Remote control make and model - are you using a cable box - make and model.

Thanks.

Welcome to FixYa.
Try to add a number zero in the beginning or the end of the 3 digit code provided in the list.

Thank you for using FixYa.

Have a great day.
Jas247

Please check on the links below for tips;

http://www.espares.co.uk/search/remote-controls/p/1090?utm_campaign=06-2011+unlimited+credit+1st&utm_medium=email&utm_source=emails ........ search for models of all types

http://www.xdiv.com/remotes/

http://www.hifi-remote.com/ofa/codes-tv.shtml#tv

Hello
Three digit universal remote codes to check with Samsung tV are:
004/ 005/ 009/ 015/ 104/ 105/ 106/ 109/ 133/ 172
Four digit codes are:
0105 0077 0076 0109 0007 0009 0004 0005 0085 0172 0942 0358 0012 0015 0080 0104 0106 Direct Code Entry

1. Press and hold the SETUP button until the red indicator stays on, then release the SETUP button.
2. Press and release the desired Mode button (TV, VCR, etc.). The red indicator blinks, then stays lit.
3. Enter the 4 digit code from the code tables. Note: after a valid code entry, the red indicator turns off. For an invalid code, the red indicator flashes.
4. With your device on, press CHANNEL UP. If the device responds, no further programming is required. Note: If some buttons do not operate your device, try one of the other codes for your brand.

Code Search If after trying "Direct Code Entry" your device does not respond, or if your brand is not listed, try doing a search of the code library for your code by following these steps.

1. Manually turn on the device (TV, VCR, etc.) to be controlled.
2. Press and hold the SETUP button until the red indicator stays on, then release the SETUP button.
3. Press and release the desired Mode button (TV, VCR, etc.). The red indicator blinks once, then stays on.
4. Press the CHANNEL UP button repeatedly (up to 300 times) until the device to be controlled changes channel. The red indicator blinks, then stays lit.
5. Press and release MUTE to install the code. The indicator light goes off.

Most users will want to store VCR codes under the VCR button, Cable codes under CBL, etc. If you want to store a VCR code under CBL, etc., first follow the procedure for Direct Code Entry and press CBL in step 2 of Direct Code Entry, then enter ANY VCR code in step 3 of Direct Code Entry. Then follow the steps above for Code Search.

take out the batteries and don't use for a few days to a week and then try it again. It needs to be totally dry inside.

If this helps please leave me a rating, thanks.

The remote's volume keys are "punch-thru" keys, meaning they'll work for the TV for which the
remote is programmed no matter what mode the remote is in. It seems your remote is not
in "TV mode," but the punch-thru keys (volume UP/DOWN) are working.
The Solution: change the remote from "AUX mode" or "DVD Mode" back to "TV mode", by
pressing the "TV" button at the top of the remote.

Either that, or your remote keypad has failed with the exception of the Volume UP/DOWN keys....
Also, your batteries may be failing, since it takes a tiny amount of energy to light
the IR (infra-red) LEDs at the front of the remote to change the volume.
Is your remote a "multi-function" remote?
Could help more if you could post your Samsung remote model number, since
www.samsungparts.com lists 37 pages of TV remotes (at 10 models per page).

CODE YOU HAVE GIVEN SEEMS WRONG IS IT A OLD CRT , LCD , PLASMA OR LED TV

replace it. you deserve logitech harmony
or just drop by local dollarshop to get a replacement.

This is the replacement remotehttp://www.remotes.com/remotes/servlet/rs?a=gmi&smodel=3F14-00026-173&brand_pn=SAMSUNG_3F14-00026-173&mode=large&v=1&uuid=A13046638114881
I would suggest, considering the price of it, to buy a universal remote http://www.amazon.com/Remote-Controls-TV-Accessories/b?ie=UTF8&node=10967581

This would be easier to answer if you had included model numbers of both. Check the connectors on each and you should find color-coded connectors marked with matching inputs & outputs. You will need to connect the outputs of the VCR to the matching inputs of the TV. The signal coming from the VCR will, of course, be analog so you may need to set the TV on channel 3 or 4 and select the appropriate inputs of the TV via the main menu. It should state 'Analog.' If you are concerned about keeping stereo signals on the proper sides, red=right, white=left.

Hello
There are two ways to set a remote with a TV. They are direct Code Entry and Code Search. i'll give here both the proceedings. OK.

Direct Code Entry

1. Press and hold the SETUP button until the red indicator stays on, then release the SETUP button.
2. Press and release the desired Mode button (TV, VCR, etc.). The red indicator blinks, then stays lit.
3. Enter the 4 digit code from the code tables. Note: after a valid code entry, the red indicator turns off. For an invalid code, the red indicator flashes.
4. With your device on, press CHANNEL UP. If the device responds, no further programming is required. Note: If some buttons do not operate your device, try one of the other codes for your brand.

Code Search If after trying "Direct Code Entry" your device does not respond, or if your brand is not listed, try doing a search of the code library for your code by following these steps.

1. Manually turn on the device (TV, VCR, etc.) to be controlled.
2. Press and hold the SETUP button until the red indicator stays on, then release the SETUP button.
3. Press and release the desired Mode button (TV, VCR, etc.). The red indicator blinks once, then stays on.
4. Press the CHANNEL UP button repeatedly (up to 300 times) until the device to be controlled changes channel. The red indicator blinks, then stays lit.
5. Press and release MUTE to install the code. The indicator light goes off.

Most users will want to store VCR codes under the VCR button, Cable codes under CBL, etc. If you want to store a VCR code under CBL, etc., first follow the procedure for Direct Code Entry and press CBL in step 2 of Direct Code Entry, then enter ANY VCR code in step 3 of Direct Code Entry. Then follow the steps above for Code Search.

si dovrebbe fare è cercare di aprire il telecomando, pulita fino a secco.
se c'è una connessione carbone manca, non funziona più.
controllare e sostituire il batery a causa dei danni. speriamo di aiuto.

Hi

I have this tv, It is not a internet@TV model it only alows to stream media (Video, Photos & Music) using dlna enable devices (such as the samsung galaxy s) and windows media center.

make sure nothing is damaged on the remote. after doing so unplug you're tv. when the tv is turned back use the remote close to the tv and use the remote. make sure the sensor on the tv is not blocked by anything (movies,books anything). if it still isn't working consider buying a replacement