20 Most Recent Samsung DVD-VR330 VCR and DVD Recorder - Page 5 Questions & Answers

I get the same message. But to be honest I'm lucky if it gets to 20%. The unit is so tempermental it's ridiculous.

get rid of this junk unit, i paid 300.00 over a year ago, and it sucks

I know the slightest bit of dust either on the disk or in the player causes this in mine. Usually I can simply wipe the disk with a soft cloth when mine does it and it works fine.

thats either a faulty disk or dust in the player. Get a cleaner for the cd player, such as a cleaning disk

The unit is defective and needs repair/replacement

.then the problem with the cd player laser beam reading assembly and its associating blocks
2. i guess your cd player laser beam lens is too weak or dead.
3. There is possible to change the lens system with a new one
4.Contact service centre for further rectification

It only records on to the VHS not the DVD, it just plays DVD's

Maybe the DVD disk needs to be finalized to play in other players.

there should be a small pin hole in the draw of the dvd, put a pin r paperclip in the hole and push to manually open it.

call sumsung tech support

Using the remote, press "display/input" button for 10 sec, to unlock the unit.

Samsung dvd players are known for bad spin motors. You may try to clean the laser and see if that changes the disposition of the problem. If there is no change and with the top of the unit off,if you see the pin point of laser on top of the disc, and the disc moves or shivers, the chances are it is a bad spin motor. In most cases, it is not cost effective to replace the motor. If an auxillary line in jackis available , buy a $30 dvd to replace it rather than taking it to a service facility that will charge you the same amount to evaluate it. Scrivitron

bro you should take it to the repairer,No other options you have. it can't be fixed by doing anything accept changing it's screen or repairing it, if it's possible

Hello. You can check HDMI cable in this case. If you're using an HDMI port that's not working well or has been damaged, it could result in a darker-than-usual screen. If you switch the cable or change devices and the TV is at a regular brightness, this is the case.

It sounds like you might be dealing with backlight bleeding or an issue with the LED backlighting in your TV. This can sometimes occur over time due to normal wear and tear or manufacturing defects. If it started as a faint single brighter section and has now expanded to four, it's likely a hardware issue. While it may not be an easy fix, contacting the manufacturer's customer support or a professional technician would be a good next step to diagnose and possibly repair the problem. If you'd like, you can share the pictures for a more accurate assessment.

All I can advise is to take it to an authorised Samsung repair shop. A list is available on the Samsung web site.

The old yellow, red, white RCA cables are analogue signals, while HDMI cables only carry data. They are in no way compatible. You can buy active conversion boxes that will convert analog to digital, but simple cables cannot work

It can't be done. The Samsung remote will be single frequency for that Samsung device only and the LG remote for that television (or series) only. Companies don't make cross-control between makers easy. The only exception is cable and satellite boxes to allow their remote to also control the television. If you have lost a remote or it doesn't work, this is the answer https://www.fixya.com/support/r29872378-universal_remotes_no_facsimile_remote ..

These LEDs are very susceptible to static electricity damage. What happens when they get zapped is a tiny threading fault starts in the LED crystal. The aluminum contact metal starts migrating into the crack, makes it wider and longer, and eventually goes all the way through the LED and shorts it out. When that happens, the metal overheats and burns out the LED so the entire string goes dead. What this means for you is that the original LED may have been may have been zapped at the factory. The replacement strip likewise, or when it was removed from another TV (if it is a used part), or when you put it in. It should have been in anti-static packaging. You have to be very careful not to touch any of the circuitry on the LED strip, and make sure you ground your hand to the TV metal both before picking up the LED strip and right before connecting the strip to the TV. Better yet, use an anti-static wristband connected to the TV frame. It is possible that the LED driver for that string is pushing too much current, but that's not likely. You would probably notice that part of the screen is unnaturally bright.

Can you tell this power supply board zener doide value?