20 Most Recent
Samsung GX-1S Digital Camera Questions & Answers
I am trying to obtain
In order to get firmware downloads, you need to register the camera on the Samsung website.
When using external flash some are ok but some
There is no single "best" setting, that's why the camera provides so many. It depends too much on the particular setting, the effect you're going for, and other factors.
If you're seeing undesired movement, that's an indication that the shutter speed is too slow. Using either Manual or Shutter-priority mode, set the shutter speed faster (being careful not to go faster than the maximum sync speed).
Can't turn on
just follow some tips below:
when u insert battery and turn on you told the battery icon will blink so try giving reset once ....
i think the firmware has got corrupted .... you must install the new firmware to it ...
after trying giving the reset option if problem persists then check whether there is connectivity with the pc or not ....
contact the service show room and get install the new firmware for your camera then it will work ....
and before have a check whether it is charging or not when the battery icon blink ...
if there is no charging progress means then there may be problem in the charging port or may be the charging IC is damaged ....
if it is charging then make sure that there is no problem with the charging port if not you must contact the service showroom and you must get replaced the port ...
any doubts reply me
i am always here to assist you
thank you
bye
My Samsung Es90 digital camera's shutter is not working, plus, the batteries are fully charged but when inserted, it only last 2-3 minutes. What can I do to resolve this?
I'm assuming by "shutter" you're referring to the one inside the camera and not the cover blades on the very front of the lens.
How old is the battery and do you use the camera a lot?
Old batteries can be fully charged but can become weak and not hold that charge when the camera is powered on. The shutter issue could be part of this as the battery might not be strong enough to power the shutter.
I think the batteries for these cameras are reasonably cheap so you could invest in a new one to see if that helps. An extra battery is always useful if you use the camera a lot.
If this is an old, well used camera part do wear out so if new battery doesn't help you may need to take it to a good repairer as the camera will need to be taken apart to find the problem.
Samsung Digimax 301 will not turn on only green light flashes
- Check battery polarity: Ensure that you have inserted the AA batteries correctly, aligning the positive (+) and negative (-) ends as indicated by the camera's battery compartment. Improper battery placement can prevent the camera from powering on.
- Clean battery contacts: Over time, battery contacts can accumulate dirt or corrosion, hindering proper electrical connections. Use a clean, dry cloth or a cotton swab dipped in rubbing alcohol to gently clean the battery contacts inside the camera's battery compartment. Make sure to let the contacts dry before reinserting the batteries.
- Replace batteries: Even though you inserted fresh AA batteries, it's possible that they may not have sufficient power to operate the camera. Try using a different set of new batteries or fully charged rechargeable batteries to eliminate the possibility of a power issue.
- Reset camera settings: Some cameras have a reset option that restores the default settings, which can help resolve certain issues. Look for a small reset button or a menu option within the camera's settings to perform a reset. Refer to the camera's user manual for specific instructions on how to reset your Samsung Digimax 301 model.
- Firmware update: If your camera has an outdated firmware version, it may cause compatibility issues or malfunctions. Check the Samsung website or contact their support to see if there are any firmware updates available for your camera model. Follow the provided instructions to update the firmware if necessary.
Not finding what you are looking for?