20 Most Recent
SanDisk Sansa c140 MP3 Player - Page 3 Questions & Answers
1 Answer
Mp3 sansa c140 frozen
1. Download the c100_1.0.005a_FirmwareUtility file and save it on the desktop.
(the player should not be attached to the computer at this point)
2. Double click the file to run it.
3. Accept the license agreement.
4. Remove the battery from the mp3 player.
5. Press and hold the center (select) button and connect it to the computer.
6. If the New Hardware Wizard appears, do the following: (if asked, choose not to connect to the internet for updates), then choose to install the device automatically, then follow the prompts to finish the installation.
7. When the wizard comes up, or when the Update button becomes active (whichever happens first), you may release the select button.
8. Click the Update button, and then click OK to the message that comes up.
9. Wait until the upgrade finishes, then unplug the device.
10. Put the battery back in, and turn on the player.
11. Hopefully the update will be performed, then choose your language prompted.
12. Check if the issue is resolved.
SanDisk Sansa...
|
Answered
on Jul 04, 2009
6 Answers
Hello, having trouble with my mp3 player SanDisk c140.
Solution is pretty simple.
Go to Settings on your device -> USB -> Change it to MSC.
When you connect it to your computer on Win2000 it will show as a
drive. Open the drive you should see the folders. Drag and drop your
mp3's into Music* folder. Or your videos into Video folder and your
Photos to Photos folder.
SanDisk Sansa...
|
Answered
on May 08, 2009
1 Answer
Removal icon
A removal icon is usually associated with a device mounted as a drive
(an MSC device) because windows may delay/cache writes to it. If you're
using a music player like Rhapsody or WMP to access the device (as an
MTP device), it handles the transfers without buffering, so you don't
need windows to unmount before disconnecting. The sandisk can be
accessed either way (though there's an option in its menus to force it
to be MSC).
SanDisk Sansa...
|
Answered
on Apr 28, 2009
1 Answer
A mtp device
To put songs on the device while it's in MTP mode, you need a music program (Rhapsody, WMP, etc... I use Media Monkey which is freeware).
If you want to access the player as a standard usb storage device, go into the player's menu, and under settings->USB, change it to MSC mode.
SanDisk Sansa...
|
Answered
on Apr 28, 2009
1 Answer
Removal icon doesn't show on
A removal icon is usually associated with a device mounted as a drive (an MSC device) because windows may delay/cache writes to it. If you're using a music player like Rhapsody or WMP to access the device (as an MTP device), it handles the transfers without buffering, so you don't need windows to unmount before disconnecting. The sandisk can be accessed either way (though there's an option in its menus to force it to be MSC).
SanDisk Sansa...
|
Answered
on Apr 28, 2009
1 Answer
C140samsung hanging
I spent
hours last night trying to solve this same issue.
Becuase the problem is SO common, and the information is so scattered, I decided to write up my discoveries on a
wiki
Hope this helps!
SanDisk Sansa...
|
Answered
on Apr 25, 2009
1 Answer
Sansa c140 says it's full but its not
on the left hand side above the word create playlist, you'll see an eighth note next to the word music. click on the arrow next to the word music.click sansa c140 (if u have one) then click the arrow nest to sansa c140 and click on folder. then open it and you'll see a picture that looks like a stack of cds. click on it ONCE then press the delete key. it will delete allyour songs. then go back to the library and download back the songs you want.
SanDisk Sansa...
|
Answered
on Apr 15, 2009
3 Answers
Problem in C140 SANDISK
I am from India too ;)
Updating the firmware will return your device to factory setting, like new. It should work normally after that.
Download this file:
http://www.sendspace.com/file/0mc3km
This is the firmware update utility for Sanca c140 (c100 series) devices.
There is a howto.txt file included, follow the instructions.I am posting the instructions here for convenience.
1. Download the attached file and save it on the desktop.
(the player should not be attached to the computer at this point)
2. Double click the file to run it.
3. Accept the license agreement.
4. Remove the battery from the mp3 player.
5. Press and hold the center (select) button and connect it to the computer (keep holding the button, this is the firmware update mode).
6. If the New Hardware Wizard appears (now you can let go of the select button), do the following: (if asked, choose not to connect to the internet for updates), then choose to install the device automatically, then follow the prompts to finish the installation.
7. When the wizard comes up, or when the Update button becomes active (whichever happens first), you may release the select button.
8. Click the Update button, and then click OK to the message that comes up.
9. Wait until the upgrade finishes, then unplug the device.
10. Put the battery back in, and turn on the player.
11. Hopefully the update will be performed, then choose English for the language when prompted.
12. Check if the issue is resolved.
SanDisk Sansa...
|
Answered
on Mar 30, 2009
Not finding what you are looking for?
