20 Most Recent SanDisk 2GB Cruzer Micro SDCZ62048A10 Hard Drive - Page 7 Questions & Answers

if you mean you have accidently deleted your files from your scan diskyou could try this software to recover themthere are plenty of free recovery programs on the internet if you are unable to recover them with this onehttp://majorgeeks.com/Free_File_Recovery_d6792.html

Free File Recovery is a small and easy to use application that will help you to restore files that have been accidentally deleted from your computer.

This includes files emptied from the Recycle bin as well as images and other files that have been deleted by user error from digital cameramemory cards or MP3 players. It will even bring back files that have been deleted from your iPod, or by bugs, crashes and viruses!

hope this helps you

click start all programs accessories open windows explorer navigate to your photos right click on the photo's select copy navigate back to the usb drive right click select paste or select the top photo hold the mouse cursor then select the bottom photo then drag the photos to your usb drive then drop them or if you are downloading photos from the internetonce it starts downloading windows will ask whether you want to run or save it a browse option will open you can save it into a folder in my documents or another device or a usb deviceif you need more help with this post a reply hope it helps you

what do you mean by unlock ?

click start control panel administrative tools computer management device manager scroll down universal serial bus controllers you could see a yellow question / exclamation mark? ! or a red X

you will need to update/reinstall drivers

right click to reinstall drivers

if you can see your usb drive but its not working

ports (com&lpt) right click update driver if this fails to fix the problem

check the USB leads that attach to the motherboard usually red white green black make sure they are securely seated and have no dust build up on them dust will cause static and a lot of unforeseen problems for a computer and its parts

if you need more help with this post a reply

hope this helps you

click start control panel administrative tools computer management device manager scroll down universal serial bus controllers you could see a yellow question / exclamation mark? ! or a red X

you will need to update/reinstall drivers

right click to reinstall drivers

if you can see your usb drive but its not working

ports (com&lpt) right click update driver if this fails to fix the problem

check the USB leads that attach to the motherboard usually red white green black make sure they are securely seated and have no dust build up on them dust will cause static and a lot of unforeseen problems for a computer and its parts

if you need more help with this post a reply

hope this helps you

click start all programs accessories open windows explorer navigate to your data right click on the data select copy navigate back to the usb drive right click select paste or select the data hold the mouse cursor then drag the data to your usb drive then drop it in or if you are downloading data from the internet once it starts downloading windows will ask whether you want to run or save it a browse option will open you can save it into a folder in my documents or another device or a usb deviceif you need more help with this post a reply hope this helps you

click start control panel administrative tools computer management device manager scroll down universal serial bus controllers you could see a yellow question / exclamation mark? ! or a red X

you will need to update/reinstall drivers

right click to reinstall drivers

if you can see your usb drive but its not working

ports (com&lpt) right click update driver if this fails to fix the problem

check the USB leads that attach to the motherboard usually red white green black make sure they are securely seated and have no dust build up on them dust will cause static and a lot of unforeseen problems for a computer and its parts

if you need more help with this post a reply

hope this helps you

SCAN THE DRIVE (FLASH DRIVE) FOR VIRUS, MAY BE SOME VIRUS HAS ALLOTED ATTRIBUTE AS HIDDEN TO ALL FILES, ALSO ENABLE SHOW HIDDEN FILE OPTION IN FOLDER OPTION TO SEE IF U CAN STILL FIND THE FILES ON UR FLASH DRIVE UNLESS SOMEHOW IT HAD BEEN FORMATTED

click start control panel user accounts on the users tab click the name of the computer administrator you must have full controlIf you are running a Windows XP OS then you might be able to: - click start right click on my computer select open- Right click the icon of your Flash Drive (It should be F:/ or something) - Click Properties in the menu that comes up - Click the Sharing tab - Click permissions - And finally, click Allow next to Full Control.

Ok turn on PC, and have that drive plugged into the usb port. Find your my computer icon, right click on it and goto manage in the menu. This will open the computer manager, in the list on the left you will see disk manager under Storage. Click on disk management, in the window on the right you will see the different Hard Drives and Storage devices there. Look for the one that does not have a drive letter and may state unknown. Right Click on the device and Mark Partiton as active, then also format the drive. Viola! you should now have your Pen Drive showing up under my computer.

If you use windows 7 to safely remove the drive and it tells you that it's fine to do so then you're ok.

The reason you do this is because if there's any files still being used by Windows when you pull the drive, you could damage those files or even the file system. When you safely remove the device you're telling Windows to stop any and all connections with the device. Even if the light is still on, if Windows is telling you it's ok, then it means that it's no longer being used by any programs or the OS

The memory chip inside it has failed and cannot be repaired. The flash drive is dead, junk it and buy a new one.

First you need to check whether it is infected with any virus or not, may it is affected with cluster virus first try to remove it with any reliable anti virus. Second may you formatted it with quick format option, delete complete data of drive then format it once again.

One or more of the hints below will probably sort out most USB problems with most USB portable / external hard drives and OTHER devices (though not always)

A few things to check but assumes USB and Windows for other interfaces / operating systems (mac/ Linux) similar steps may be adapted to suit.

1. Ensure it is connected directly to the computer to a USB 2.0 port not a USB 1.0 port as this can have effects on performance and reliability

2. Use only the cables that came with it NOT one that fits that may have been lying around or is longer. Not all USB cables are equal even though they should be)

3. Do not connect through an external USB HUB unless that hub is USB 2.0 AND has its own power supply.

4. Use ONLY the power supply that came with it if it has an external power supply Don’t use any other unless you know it has both the same voltage and current rating e.g. 12V 500mA anything rated below that would not work properly.

5. Always use the same port for connecting your devices. Some devices do not like being switched about. If switched they may want to install software / drivers again. This can be especially true if you move a HUB to another port

6. For FLASH DRIVES you should ensure that the device is set for "quick removal" using the drive control panel properties or use the USB "Safely Remove Hardware" option. If you dont do this there is a very strong chance that any files you transfer may not be there when you plug into another computer.
7. It is possible to remove drives from the enclosures in most cases and connect directly inside a PC to fully check it.
You should also do this to cheack the drives connections are not bad inside the enclosure.
　
8. If none of the above steps help look at updating the drivers from the manufacturers web site in the support section.

9. If you checked and fixed anything there and still have issues then check your hardware from CONTROL PANEL / SYSTEM / HARDWARE.
Any exclamation marks by hardware need fixing before you investigate any further
10. ensure that you have set removable drives for "quick removal" or that you use the "Safly Remove Hardware" option often shown on the lower toolbar.It is possible that files my not be fully written to external devices before they are removed. This corrupts the file itself and even on occasion the drive.
SPECIAL NOTES
USB flash drives can fail for no apparent reason.
Sandisk Cruzers are especially bad for this.

USB hard drives should be treated with extreme care.
This is a real hard drive ! and knocks and bumps can quite literally kill them.

Note that if you hear a drive clicking or pinging this could be the worst thing you would hear.
Known as "The Click Of Death"
Hope this gives you the information you need

Bob
EXMOD

It would be very decent of you to consider the quality of our experts answers and judge them accordingly as you pass through FixYa.

Thank you

http://download.cnet.com/%7Bvalue=http://www.download.com/usb-safeguard-free/3000-2092_4-75115673.html

USB Safeguard is a portable software program to encrypt and protect data with a password on your removable pen drives using the AES 256 bits encryption.

The main purpose of using a USB pen drive is that you can bring your data with you wherever you go. But if you lose your USB pen drive your data also lose.

This is dangerous if you have confidential files stored in it. Protect the pen drive with a password. USB Safeguard offers users (novice and expert) a friendly yet extremely powerful security solution that fully protects valuable data stored on USB pen drives.

Also, the program has a useful feature that allows you to enter your email or phone if you lose the pen drive. Free version works only with USB Flash drive of size max 2 GB

hope it helps you

click start control panel administrative tools computer management device manager scroll down universal serial bus controllers you could see a yellow question / exclamation mark? ! or a red X

you will need to update/reinstall drivers

right click to reinstall drivers

if you can see your usb drive but its not working

ports(com&lpt)right click update driver if this fails to fix the problem

check the USB leads that attach to the motherboard usually red white green black make sure they are securely seated and have no dust build up on them dust will cause static and a lot of unforeseen problems for a computer and its parts

if you need more help with this post a reply

hope this helps you

click start click to open on my computer you should see your usb drive F: right click select properties there will be an array of options select the sharing tab option then advanced sharing make sure you have a tick in the share this folder box then click permissions make sure you have full control in windows 7

click start control panel user accounts click on the administrators account if you have made one or you will have to create one in windows XP

click start right click on my computer select openRight click the icon of your Flash Drive (It should be F:/ or something) Click Properties in the menu that comes up Click the Sharing tab Click permissions And finally, click Allow next to Full Control. hope this helps you

click start control panel administrative tools computer management device manager scroll down universal serial bus controllers you could see a yellow question / exclamation mark? ! or a red X

you will need to update/reinstall drivers

right click to reinstall drivers

if you can see your usb drive but its not working

ports(com&lpt)right click update driver if this fails to fix the problem

check the USB leads that attach to the motherboard usually red white green black make sure they are securely seated and have no dust build up on them dust will cause static and a lot of unforeseen problems for a computer and its parts

if you need more help with this post a reply hope this helps you

click start control panel administrative tools computer management device manager scroll down universal serial bus controllers you could see a yellow question / exclamation mark? ! or a red X

you will need to update/reinstall drivers

right click to reinstall drivers

if you can see your usb drive but its not working

ports(com&lpt)right click update driver if this fails to fix the problem

check the USB leads that attach to the motherboard usually red white green black make sure they are securely seated and have no dust build up on them dust will cause static and a lot of unforeseen problems for a computer and its parts hope this helps you

Format your drive

click start control panel administrative tools computer management device manager scroll down universal serial bus controllers you could see a yellow question / exclamation mark? ! or a red X

you will need to update/reinstall drivers

right click to reinstall drivers

if you can see your usb drive but its not working

ports(com&lpt)right click update driver if this fails to fix the problem

check the USB leads that attach to the motherboard usually red white green black make sure they are securely seated and have no dust build up on them dust will cause static and a lot of unforeseen problems for a computer and its parts

hope this helps you

click start control panel administrative tools ,computer management ,device manager look through all of your devices if you see a yellow question mark?or exclamation mark ! or red x

right click to reinstall drivershope this helps