20 Most Recent SanDisk 1GB Cruzer Titanium USB Flash Drive (413072) Hard Drive - Page 8 Questions & Answers

click start control panel administrative tools computer management device manager scroll down universal serial bus controllers you could see a yellow question / exclamation mark? ! or a red X

you will need to update/reinstall drivers

right click to reinstall drivers

if you can see your usb drive but its not working

ports (com&lpt) right click update driver if this fails to fix the problem

check the USB leads that attach to the motherboard usually red white green black make sure they are securely seated and have no dust build up on them dust will cause static and a lot of unforeseen problems to a computer and its parts if you need more help with post a reply hope it helps

• Start Menu -> Run -> type 'regedit' (without the quotes) -> Hit Enter !
• Now take a backup of your registry, incase something goes wrong:
  Right Click on 'My Computer' -> 'Export' > save it on the Desktop.
• Now Browse through these tabs:
  My Computer\HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\StorageDevicePolicies
• Double click on the string 'WriteProtect' and change the 'Value Data' box to '0'
• On Toolbar, Click on File -> Export -> Save it anywhere with any name like 'WriteProtection01.reg' or anything.
• You need to repeat the step 3 - step 5 with every string on folder named 'ControlSet***' (* = any Digit, i.e. 001, 002) - that is, instead of currentcontrolset, repeat the steps for folders controlset***
  For Example :
  My Computer\HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Control\StorageDevicePolicies
  - Again export it on same directory as before, named as 'WriteProtection0**.reg'

Note : These exports are just incase you need to revert the changes in your registry, to revert, just double click on the *.reg file, and click yes when it prompts.

if you are referring to a usb drive

click start control panel administrative tools computer management device manager scroll down universal serial bus controllers you could see a yellow question / exclamation mark? ! or a red X

you will need to update/reinstall drivers

right click to reinstall drivers

if you can see your usb drive but its not working

ports (com&lpt) right click update driver if this fails to fix the problem

check the USB leads that attach to the motherboard usually red white green black make sure they are securely seated and have no dust build up on them dust will cause static and a lot of unforeseen problems to a computer and its parts if you need more help with this or if i have missed the problem post a reply hope it helps

click start control panel administrive tools computer management disk management right click on your drive select properties click tools you should see click check now click start two boxes automatically fix files and scan for and attempt recovery of bad sectors place then a tick in one box then select check now start or you might tick one box then return after its finished the first repair then return and tick the second box I have found better results ticking the first box then reurn and tick the second box you should not do anything while the chkdsk utility is in progress any input may damage this drive also you might need to do this

click start click to open on my computer you should see your usb drive F: right click select properties there will be an array of options select the sharing tab option then advanced sharing make sure you have a tick in the share this folder box then click permissions make sure you have full control in windows 7

click start control panel user accounts click on the administrators account if you have made one or you will have to create one in windows XPalsoIf you are running a Windows XP OS then you might be able to: click start right click on my computer select openRight click the icon of your Flash Drive (It should be F: / E: or something) Click Properties in the menu that comes up Click the Sharing tab Click permissions And finally, click Allow next to Full Control.

if you need more help with this post a reply

hope this helps

this will vary on a persons particular choice these days all usb drivers perform vey wellthis will vary depending on the brand capacity of the pen drive also buy one with a lifetime warranty transcend are good and have lifetime warrantyanother good brand is kingston 5 yr warrntyadata another with life time warrantycorsair voyager 10 year warrantyif you need more with this or you are having problems with your scan disk drive post a reply

http://www.brighthub.com/guides/usb-flash-drive.aspx

complete guide to usb driveshope it helps

I am not sure of what you are really asking here. So I will try a generic answer. The Sandisk has a size on it, lets say it is 1GB, so as long as you are saving a file that is smaller 999mb or less you should be able to save it. The sandisk should look like another drive on your computer, so you should be able to copy, move, or delete anything on it. I hope this helps. Please rate my answer so I get points awarded for it.

Information you need, you can download here SanDisk Cruzer Edge 8GB 16GB 32GB 64GB Capacities

click start control panel administrive tools computer management device manager scroll down universal serial bus controllers you could see a yellow question mark?

right click to reinstall drivers

if you can see your usb drive but its not working

ports(com&lpt)right click update driver if this fails to fix the problem

check the USB leads that attach to the motherboard usually red white green black make sure they are securely seated and have no dust build up on them dust will cause static and a lot of unforeseen problems for a computer and its parts

click start control panel administrive tools ,computer management ,device manager look through all of your devices if you see a yellow question mark?or exclamation mark ! or red x

right click to reinstall drivers

hope this helps

click start control panel administrive tools ,computer management ,device manager look through all of your devices if you see a yellow question mark?or exclamation mark ! or red x right click to reinstall drivers or if you can see your usb but its not working ports(com&lpt)right click update driver sometimes the wires inside the cable will be damaged due to bending or stretching or placing heavy equipment upon the cable, just replace the cable of the hard disk, when you plugged the external disk drive you got that windows could recognize the USB device change the cable everything should work fine again, check the USB leads that attach to the motherboard usually red-white-green-black make sure they are securely seated and have no dust build up on them dust will cause static and a lot of unforeseen problems also make sure the computers Ram and Cmos battery are securely seated hope this helps also click start control panel administrive tools computer management disk management right click on your drive select properties click tools you should see click check now click start two boxes automatically fix files and scan for and attempt recovery of bad sectors place then a tick in both boxes then select check now start or you might tick one box then return after its finished the first repair then return and tick the second box you should not do anything while the chkdsk utility is in progress any input may damage this drive hope this helps

http://majorgeeks.com/Dr._Freeware_System_Utilities_d6416.html Dr.Freeware System Utilities which includes data recovery software, data backup, password reset tools for Windows helps you to maintain your system. Dr.Freeware is freeware, you can download and use it for free. Data Recovery/Data Backup: Supports Logical scan and Raw scan, Supports NTFS, FAT, UFS 1, UFS 2, EXT2FS, EXT3FS, and ISO 9660 file sytem, Supports IDE/SATA/USB Hard Drives. Data Recovery - Recover your lost data Available in Live CD to run offline Recover accidentally deleted files in your hard drive Recover data from RAW Drive(partition table or file system is damaged) Support NTFS, FAT, UFS 1, UFS 2, EXT2FS, EXT3FS, and ISO 9660 Support IDE/SATA/USB Hard Drives, memory cards, "USB Memory Drives" Drive Dumper - Backup your hard drive Available in Live CD to run offline Available to run on Windows Support Windows 2K / XP / 2003 / Vista / 7 (Windows Editition) For data rescue, backup, migration, or computer forensics etc. Transfer important important data from damaged Drive(partition table or file system is damaged, has lots of bad data blocks) Support NTFS, FAT, UFS 1, UFS 2, EXT2FS, EXT3FS, and ISO 9660 Support IDE/SATA/USB Hard Drives, memory cards, "USB Memory Drives" Windows Password Cleaner Available in Live CD to run offline This is a utility to blank the password of any user that has a valid (local) account on your Windows system. You do not need to know the old password to blank the password. Support Windows NT/2k/XP/Vista Support IDE/SATA/USB Hard Drives

Hope this helps

You would normally put the card in a card reader nd just copy them from the card to a folder on your computer eg. My Pictures.

If you are having problems with that aspect then check below.

I devised these simple steps that tend to remedy quite a few issues with most USB portable / external hard drives and OTHER devices (though not always)

A few things to check but assumes USB and Windows for other interfaces / operating systems (mac/ Linux) similar steps may be adapted to suit.

1. Ensure it is connected directly to the computer to a USB 2.0 port not a USB 1.0 port as this can have effects on performance and reliability

2. Use only the cables that came with it NOT one that fits that may have been lying around or is longer. Not all USB cables are equal even though they should be)

3. Do not connect through an external USB HUB unless that hub is USB 2.0 AND has its own power supply.

4. Use ONLY the power supply that came with it if it has an external power supply Don’t use any other unless you know it has both the same voltage and current rating e.g. 12V 500mA anything rated below that would not work properly.

5. Always use the same port for connecting your devices. Some devices do not like being switched about. If switched they may want to install software / drivers again. This can be especially true if you move a HUB to another port

If you checked and fixed anything there and still have issues then check your hardware from CONTROL PANEL / SYSTEM / HARDWARE.
Any exclamation marks by hardware need fixing before you investigate any further

USB flash drives can fail for no apparent reason.
Sandisk Cruzers are especially bad for this.

USB hard drives should be treated with extreme care.
This is a real hard drive ! and knocks and bumps can quite literally kill them.

It is possible to remove drives from the enclosures in most cases and connect directly inside a PC to fully check it.

Note that if you hear a drive clicking or pinging this could be the worst thing you would hear.
Known as "The Click Of Death"

If none of the above steps help look at updating the drivers from the manufacturers web site in the support section.

Hi, I have located three types of manuals for your Viewsonic Viewpad 7. Please see below to see which you would like:

1. User Manual: Click Here.
   
   
2. User Guide and Tutorial Manual: Click Here.
   
   
3. Frequently Asked Questions (FAQ): Click Here.

Hope this helps. If it does, please accept and rate the solution! Contact me with any more questions you may have. Thanks for using FixYa!