I have a Siemens Speedstream 4200 Modem and am trying to get the drivers for this, am putting in http://192.168.254.254 in the address field as I was originally instructed to when I first received the modem but I can't seem to access it now. Do you know where I can get the drivers for this modem? I was with a different ISP when I last used this.
Posted by debbant on
OK, we are all not dumb. the question is where are the drivers. Just go to www.hankscomputerservice.com/SpeedStream4200driversxp&vista.zip for both the drivers for XP & VISTA, or get everything ells you want from http://www.thevoipstore.net/speedstream-4200.php
Posted on Feb 18, 2009
how to install Siemens Speedstream 4100 Modem manual installion
* You dont need any special drivers to install modem.
* Open up internet explorer, type 192.168.0.1 in the address bar and press enter key.
* Now you should see the configuration page of modem.
* On the left side, click on Advanced button, below that, you will see "connection configuration" option - click on it.
*** If it asks for modem access code anywhere, you can find the code underneath the modem. please type it ***
* Under this page, you have to enter the email address in username field and password, change the connection type to smart keep alive, click on save changes
* Now it may ask you for restart modem. click on restart. within 1 min, you will be connected to internet.
Posted on May 26, 2008
Setting currently STRICT NAT but can't even work out how to talk to modem to change setting. Please help as I have no idea just want trouble free Halo. Cheers
Posted by Roachey on
Hey, I've had the same problem too with my NAT but it said medium instead of restricted. I havent tried this yet cause I'm at work but you restart your router by just inpluggin the power cord and waiting 20 seconds than trying again.
Hope that works!
Posted on Nov 07, 2007
gigaset se568 siemens wireless Security setting
Posted by mtk2002 on
i have a little problem with my siemens gigaset SE568, here all led lights are glowing except the internet, i checked my net connection with another modem and the result was positive but what is the problem here i can't figure out,please help me,rahat
Posted on May 25, 2009
Using same phone line that was used for dial-up, which still works.
Never had DSL before.
House wiring checked as was all other new wiring.
DSL light on SpeedStream 4100 flashes red instead of steady green.
I connected to phone plug in outdoor interface box and got same result.
Have two Ethernet plugs on Dell computer; I get same result. I believe they both work.
All other test restults on AT&T Technical readout page say "pass" or "skipped".
Posted by waterguy9 on
hi,there are a lot of possibilities y ur dsl light wont stop flashing red, 1.could be hardware failure,2.defective lead light for dsl,3.or line issue on the network...i strongly recommend that you contact your isp or att provider so that test would be done by their tech support,...basically you have checkd all inside wirings n as you have said you even tested the nid already...have you tried changing the dsl cable or phone cable? have you tried using another modem? were you using a filter for your dsl? you have to consider also other emi/rfi or electronic interference....but most probably you might try upgrading your modem n see if your gonna get a steady dsl light...the ethernet plugs has no effect on the dsl light...its just the cable connection or line issue or defective modem...i hope this will help, pls feel free to ask if you need further astnce...
Posted on Dec 01, 2007
i'm having trouble connecting to xbox live and it's keeps saying that the minimum MTU setting needs to be 1364 and anything less than that won;t work. i have the ethernet plugged in directly from the xbox to the siemens speedstream 4200. how do you change the MTU setting to something that will meet or exceed requirements of xbox live?
Posted by greenman09... on
Log into modem using 192.168.2.1 in your browser and go to modem utility through browser.
Posted on May 18, 2008
Trying to set up 4200 on DSL. Am doing configuration with laptop plugged directly into ethernet port. I get both a DSL light, and an ethernet light.
Open IE, and have tried http://speedstream, http://10.0.0.138 etc, but cannot access modem setup to configure my broadband account.
I have the Speedstream manual.
Best I have achieved to date is "limited connectivity" after LAN setup to find IP address.
Posted by alastairno... on
I have just set up 4200 with dsl - you may find that you need to reset modem before you can configure. I was told that you need either a grey or yellow cable from your laptop to the modem. I use 10.0.0.138 to access modem. The 4200 I have was from a bigpond a/c - originally configured accordingly.
Posted on Nov 16, 2007
gets 1 red pwr lite... and 4 flashin lites.. did ipconfig .. tells media state media dissconnected .. n while installing gets this error EO301..
As you are using speed stream 4100 modem and it has a5 lights, if u have a 1 solid light for power and other all the 4 lights are flashing, It indicates either u need to upgrade the firware of modem or you may try Hard reset option of modem..At the rear sode of modem you will have a reset hole / button, u may press that using some paper clip...unplu all the cables and wait for 2 mins...connect them back in..all the lights will come up but the internet..u need to check IP address by doing IPCONFIG, whatever gateway u r getting (probably 192.168.1.1) type that into adressbar of IE and putthe correct user name and password, asked code u may get from the bottom side of ur modem...get into GUI og modem and put your complete email address and password, save settings ...Ok and restart the modem...it will be ready to go.
Posted on Sep 28, 2007
i have a siemens speetstream6520.
its all connected fine.
i have connected the modem to a Belkin wireless router to use for my laptop but it wont work.
all the lights are lit on the speedstream modem except for the one that says wireless.
its doing my head in.
can somebody please please please help me.
Posted by stacey2911 on
um not sure, but if you have the disk that came with your router run it and fill in the wireless wizard. Also, on my 6520 the "wireless" led doesnt light up unless i have a device connected that is wireless. Your laptop may be incorrectly setup
Posted on Jul 05, 2008
for some reason my dsl modem keeps like reseting its self i called att and they dont know wat the prob is
Look at the log on your 4100. Select "keep log on restart".
Look for log outs and about 4 steps down Log ins (mine were about 20 seconds apart).
See if your modem reset (watch your lights) coincides with taking your phone off hook. Take phone off hook for about 20 seconds until you loose dial tone (mine would reset at this point about 50% of the time and show several log off-on in the log.
My phone company tech (SBC/AT&T) said that there engineering department had them install some line equipment at drop site that caused this problem. If you can do something to force the reset, then you'll get some action by your telco. Otherwise the testing they do will not show a problem.
If this does not work, contact your state PUC. Your phone company will be more cooperative when they are contacted by the PUC.
Posted on Oct 02, 2008
545 questions posted
Usually answered in minutes!
Step 2: Please assign your manual to a product: