Top 20 Soyo DYLT032D 32 in. LCD Television - Page 9 Questions & Answers

If you had to play with the cord to switch the system ON, then most likely the problem is with the cord or somewhere near the place where the cord is connected on the board.
As for the switch, when you switch it ON does feel like before or is there a change. if there is a change then it could be the switch.

Hello :) how are you? i have this daytek EPT-4202AN plasma that seems to start when i click power botton but the screen doesn't show any images it stays a full black screen?? please if anyone can help me?? I really don't know what to do
pleeeease? H.E.L.P !!!!

Sounds like a definite power supply issue, once the capacitors on the power board go bad, you will sometimes be able to turn it on still, but eventually it will die completely. If you open the TV, there is likely a bulging capacitor on the power supply. Even if not a obvious capacitor problem, the Power board is likely the culprit.

Can buy new one on many websites including shopjimmy.com, or used on ebay.
shopjimmy will give you a list of the compatible parts as well as all the different tvs the board you need can be found in, to give you more options on where to find the part you need.
make sure you buy based on the part # listed on the board, and not by the model number of your TV, as there are usually many sub-models that all have different interior parts, and most are not compatible with each other.

This TV is not Wall Mountable as the Control Box protrudes and is therefore not suitable for a VESA Wall Mount.

Make sure it's not plugged into a busted outlet/fuse!! Also see if the remote makes anything happen.

power unit is the problem change the caps (capacitors) they are leaking.

Hello
Please provide the exact model number of your Soyo TV; to me, by Fixya. OK.

Check at the website linked below and you may find a 'universal' remote (none of them truly are or even can be) that has codes sets available for your Soyo and the new receiver.
Never buy an 'all-in-one' 'universal remote' without checking the mfr.'s website to ensure that the model you have your eye on will serve for both. Remotes with a design age older than the devices you wish to control will end up in the drawer.
Remotes
An additional tip; when you want help for two or more devices, always include all makes and model numbers.

Power supply board is dead.That the board,where the power a/c cord plug into it.Tries websites like Shopjimmy.com,Ebay.com to buy a whole refurbish power supply board for the replacement.

LCD panel is the most expensive part of the whole TV, you will be better off selling parts on EBAY and use the money for a new TV.


http://www.fixya.com/support/r5093881-lcd_flat_panel_tv_troubleshooting_guide http://www.fixya.com/support/r6150077-basic_lcd_monitors_troubleshooting Failed TV and Monitors: http://s807.photobucket.com/home/budm/allalbums Learn about bad caps: http://en.wikipedia.org/wiki/Capacitor_plague .

Hi.

Here a replacement remote: Replacement Remote for Soyo TV DYLT032C DYLT032D

See also Soyo tv remote controls originals

Hi,

I would recommend CANTILEVER EXTENSION ARM TILT SWIVEL Wall Mount BRACKET

It is adjustable and will fit any 42 inches LCD TV. It can also be adjusted to fit any TV inches be it 24, 32, 42 and above.

You can check the below link in order in have an idea of how it looks. You can as well order for it directly if you wish.

http://vspug.com/lcdtv32inch/2010/06/09/cantilever-extension-arm-tilt-swivel-wall-mount-bracket-for-philips-42pfl8404h-42-inch-lcd-tv-flat-panel-big-hd-ready-screen/

Good luck.

The audio is not working. Tried to mute and un-mute and that's not the issue.

1520 or 0520 or 1466 or 1314.

1520 is the one listed for the universla remotes we have here.

Hi


Thanks for using FixYa. From what you have described it seems to be an issue with the internal circuitry of the unit, please post a comment with the manufacturers name and model no# of the TV with a detailed question about the issue.




Thanks
Rylee

Unplug from the wall the longer the better, then hold power button while pluging back it to try and reset.

Have you removed back and Looked on power supply Board for bad capacitors they will be swollen,vented or puffed up on top ,if you have any that are like this replace them. Or you may just need to replace Power supply Board and heres another known fact that if your Display Panel is bad their is No Replacement Parts.

Warm water on a cloth only - no cleaning fluids.

you are screwed...

Try plugging something else (a lamp?) into the power-outlet, to see if the wall-outlet is providing power.

Try plugging the TV into some other "known-good" wall-outlet.

Take the TV to a repair shop, and have them trouble-shoot.