20 Most Recent
Symbol MC70 - Page 3 Questions & Answers
I am adding items to
yes its on the parameters of datawedge software which can be downloaded from the motorola/symbol website. Upload the software to the device and you can set it to recognise from digits from 0 to 9
11/8/2011 4:02:03 PM •
Symbol MC70
•
Answered
on Nov 08, 2011
What happens when a battery
IT TURNS OFF OR THE BACK UP BATTERY KEEP THE UNIT POWERED FOR A SHORT PERIOD OF TIME WHILE THE BATTERY IS REPLACED WITH A FULLY CHARGED ONE.
11/8/2011 4:00:24 PM •
Symbol MC70
•
Answered
on Nov 08, 2011
Well hello....we're trying to see
I am not sure if DataWedge supports reading QR codes. i-nigma Barcode Reader does support QR codes and runs on Windows Mobile 5 or 6. With the i-nigma reader installed on your mobile, you'll be ready to
decode smartcodes and connect direct to the mobile internet.
The MC70 also enables the capture of electronic signatures for proof of delivery.
I’m happy to help further over the phone at
https://www.6ya.com/expert/jeremy_69f3cc28d95bf514
8/29/2011 2:42:38 PM •
Symbol MC70
•
Answered
on Aug 29, 2011
I have a Symbol model
Hi!
Probably something internal, electronic devices are very delicate and probably someting internal needs to be replaced. My recommendation will be to contact manufacturer for repair options.
eBookBoy
7/11/2011 6:26:00 PM •
Symbol MC70
•
Answered
on Jul 11, 2011
How do I do a
Simultaneously press the power button and the 1 and 9 keys.
7/7/2011 12:42:41 AM •
Symbol MC70
•
Answered
on Jul 07, 2011
How do i completely rest the mc70
you need to use a piece of software from motorola, follow the link below and download "MC70cleaners"
http://support.symbol.com/support/search.do?cmd=displayKC&docType=kc&externalId=11744&sliceId=&dialogID=175684178&stateId=1%200%20175682106
unzip it onto the root of an SD card, put SD card in EDA,press power +1+9 together after 20 seconds release them, press top right button, updater will start, u need the mains plugged in, after it has finished it will boot into windows mobile.
Aerv 74
6/21/2011 2:46:10 PM •
Symbol MC70
•
Answered
on Jun 21, 2011
The imager or scanner on my MC70 will not scan a
Do you have any software on the MC70 to use the scanner. You can use Datawedge if your software does not integrate into the device directly.
You can download the software from devzone.symbol.com.
11/11/2010 7:43:10 PM •
Symbol MC70
•
Answered
on Nov 11, 2010
M70 Barcode canner ussing problem
i has mc70 barcode scanner .My problem is can not scan the barcode smoothly i need scan one barcode using 15 min then the thing scanned .Please help and advise ?
9/25/2010 4:28:25 AM •
Symbol MC70
•
Answered
on Sep 25, 2010
Not finding what you are looking for?