Top 20 Symbol MC9000-G Portable Terminal Questions & Answers


Si es Windows CE5, no se puede hacer cleanboot and blank. Necesitas cargar el sistema operativo de nuevo. Si es Windows Mobile 5, te puedo pasar los archivos para hacer clean boot.

Symbol MC9000-G... | 880 views | 0 helpful votes


Contact Motorola Solutions Get Support or Zebra Technologies
Support Downloads. They aren't helping on FixYa yet so it is best to reach out directly.

Mark
Motorola Mobility Support

Symbol MC9000-G... | 111 views | 0 helpful votes


Enable code 93 in symbologies on the scanner/imager settings.

Symbol MC9000-G... | 128 views | 0 helpful votes


This can be for a number of reasons.

First thing would be to try and cold boot the device:-

Remove battery half way, hold power button and trigger, push battery in fully until click and then release power and trigger

If that fails next thing would be to try and re-flash the operating system. This is done by using an SD card and loading the latest operating files onto it. The SD card slot is located under the keypad. A cross head screwdriver is required to remove the keypad. Search on symbol software download site for the latest. The download also has a readme with detailed instructions. Once the files are on perform a cold boot.

Remove battery half way, hold power button and trigger, push battery in fully until click and then release power and trigger. Drop the terminal in a cradle so that it runs on external power.

Hope this helps.

If you need any more help then please do not hesitate to contact us:-

http://www.biastechnology.com/

or TEL 01202 620955

Symbol MC9000-G... | 13,502 views | 5 helpful votes


Hello jumpmaster. When an MC90XX does this, it means that something has gone wrong with the Operating System file execution. Sometimes a cold-boot can fix it (instructions below). If not, then there is a problem with the OS files. If you purchased your MC90XX from Motorola/Symbol you should be able to download a copy of your OS to reinstall. The file will include a readme.txt that will walk you through the process. I hope this solves your problem. Good luck!
  • To Cold Boot
  1. Press the primary battery release to partially eject the battery.
  2. While the battery is partially released: simultaneously press and release the trigger and power button.
  3. Push the battery back in until it clicks.
  4. The MC90XX should power up and start it's boot-sequence.

Symbol MC9000-G... | 2,341 views | 2 helpful votes

Tip

IPhone Google Maps not Talking


On iPhone go to Settings. Scroll down to Maps and touch. Scroll down to Driving and Navigation and touch. Scroll down to Navigation and Voice Volume and ensure that Loud Volume is checked. Push the upper volume button on the side of the iPhone to max ring volume. But this is not all. Here is the secret, which it took me a long time to find out from an obscure post on the web. Open google maps and choose your location (location services must be on) as origin and some other place as destination. Touch Start (varies by screen, whether you have chosen the little angle arrow for directions or are on another screen -- no matter). Now here is the key part of it. Immediately after touching Start, push the volume up button on the side of the iPhone and keep pushing. A little volume symbol will appear on the screen with ascending bar, and you'll start to hear the voice. The problem is that the volume button works with google maps ONLY when the google maps voice is speaking (which happens for a very short time immediately after you touch Start, so you have to be quick). At other times the volume button controls ring volume, not map voice volume. Since you can't hear the google voice in the first place, you don't know when to push the volume up button to make it louder, and you can't change the volume unless the voice is speaking. The above procedure worked for me after I tried many other things and also heard from some sites that it was the new operating system that had disabled the maps voice, which is not the case. I am using an iPhone 5C with IOS 10.3.3. This may not work with other phones. Not responsible for errors or omissions. Your results may vary. Good luck to all.

on Dec 31, 2019 | Computers & Internet


Hello Richard

It sounds as though your computer is set to the incorrect keyboard. I use a key board which I brought from the UK. The computer set me up with a US Keyboard settings. The @ symbol was hiding double quote " key. Short term I could press Shift+2 and get the @. What I did eventually was to go into Settings and change;
Settings - Devices - Typing - Advanced Keyboard Settings

So you have two choices

Change the keyboard settings
or
Go to the place on your keyboard where the symbol you see when you type is located on the keyboard. Pressing that will get you the @ symbol.

click COMMENT under my post if you need further help.

Symbol Computers... | 56 views | 0 helpful votes


IDEA IS GET THE BATTERY REPLACED AT A REPAIR SHOP

Symbol Computers... | 21 views | 0 helpful votes


most likely on the keyboard you get on the screen in the left bottom corner will be an alternative symbol option key

if not you might have to change the bbid on the wi fi router and all your other devices connected to it by removing the underscore

Symbol Computers... | 20 views | 0 helpful votes


A screens hot of it would really help. And what Operating system and version are you running. These information will help the troubleshooting in solving the issue.

hoping to hear from you soon, as I will love to render my assistance.

Symbol Computers... | 23 views | 0 helpful votes


is your router or firewall blocking it? are your setting correct? Sounds like an access problem- there should be an error code or message associated with that exclamation.
good luck
you can also video call mr or over the phone for a direct fast solution https://www.6ya.com/mrmmike

Symbol Computers... | 102 views | 0 helpful votes


If the person created an FRP lock, it's impossible to unlock it.
Anti theft locks are horrible in technology.

Symbol Computers... | 52 views | 0 helpful votes


According yo the manual, it doesn't.
The "wifi" symbol means it can see the receiver.

Symbol Computers... | 31 views | 0 helpful votes


finish the question and you might get some answers

Symbol Computers... | 28 views | 0 helpful votes


try these one put * in the front and end of your numbers
ex below then higlight it then change the font to barcode

*ls427* Using the Barcode Font in Microsoft Excel Spreadsheet

Symbol Computers... | 105 views | 0 helpful votes


a true relic, 16 years old for sure last one sold new 2011,
support ended 2016 (missed the boat) 2004 first one.
https://www.zebra.com/us/en/support-downloads/mobile-computers/handheld/mc3000.html
what PC, name it and the OS, windows xp to w10., what?

you posted to computers so.....

it is a UPC bar code scanner , as seen in STORES check out.
we have no idea what wireless network any one has, until told.
my wild guess is you are not at home.
only the maker support this old UPC scanner

wireless wifi is

WLAN: 802.11a/b/g
WPAN: Bluetooth
only. and only if opted new.
the manual states
Windows Mobile 6.1 or Windows CE 5.0 device:
no story told, found this in a dumpster or garage sale>?
first time ever to attempt to get it to work?
what is you host, A PC? or what? running what os
The do not have drivers for most popular OS, sorry. and not now.
all there is , is here.

https://www.zebra.com/us/en/support-downloads/mobile-computers/handheld/mc3000.html#pageandfilelist_4c86

Symbol Computers... | 301 views | 0 helpful votes

Not finding what you are looking for?
Symbol MC9000-G Portable Terminal Logo

11 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Symbol Computers & Internet Experts

Ekse

Level 3 Expert

13434 Answers

Vish Iyer
Vish Iyer

Level 2 Expert

75 Answers

Thomas F. Schneider

Level 3 Expert

2715 Answers

Are you a Symbol Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Symbol Computers & Internet

  • Symbol Computers & Internet

Most Popular Question

freezes warm boot screen

  • Computers & Internet
Loading...