20 Most Recent T-Mobile MDA - Page 4 Questions & Answers

My daughter's MDA had the same problem. I just opened the phone and soldered the legs on the corners back to the board. You have to bend the pins on the back of the plug down to make contact with the board, before you solder. Place plug back down and line it up with contacts. If done right should work as normal. Hope that helps

uhm ya this is an option i have not tried it but there is a good chance it would work on the mda ... i have the tmobile wing OEM rom ... youcan put your phone in bootloader mode and load that then u will have thesame OS as the wing ... if ya want a link let me know
tim

yes there is a problem with ur jack (interface b/w ur upper case and keyboard) try to not press ur MDA like dont use in a tight pocket ..use pouch for ur MDA and the only solution is to replace the strip...

This happened to me also. Drain the battery completeley and then do it again. You may have to do it a couple times but it will finally take.

Clean with cleaning solution the battery charger contact on phone.

for know reason my memory card on my mda woudnt work at all and my wifi search woun't come on at all. whats the problem?

go to ur program files, both location of ur storage card an my device location...then remove the folder SPB....also goto windows\program\and del the spb too..it will work

on ur mob screen ...click and hold with in sbp suite a menu will open form where u can easily change ur desired things..use tabs ..i hope this will work

u have to hard reset ur device...and during installtion u have to select the desired region in which u r or u like to...then the language will change

dear u need to reinstall ur OS on ur MDA it will automatically install ur blue tooth device drive..there is no possiblity that in MDA blue tooth wont present...so go to start>> setting >> clear Storage...and then wait for ur OS to install automatically...but remove ur storage card and also backup of ur data (device data) or copy it to storage card...it will work..

dear squeeze ur MDA pins with small flat screw driver or some type of needles..i hope this will work...

u have to take backup of ur all data and reinstall ur OS...from "clear storage" option in ur setting...this is the only solution...use Pimbackup for backup of ur data

dear there is some problems in the pins of ur MDA...squeeze them with something...then it will work...

try other USB ports on your comptuer and try it on another computer before trying to open it up

when u hit unlock and it says just tap unlock or press * all u have to do is press the button that looks like a circle and press the button with the star on it

The freezer thing was a stupid idea. Maybe your charger is not an original charger? or if it is the charger port could be loose.

You can find a Service Manual here:
http://www.mikechannon.net/page1.html

It gives you step by step dismantling instructions

Mike Channon

Hay Saeedm
check out this link
http://www.cellphone-repair-shop.com/HTCMiniUSB.htm

I have the same issue. i just dont know how to get the parts together

DDD

There is a screen adjustment in the system tab of the settings that might help. Click on Align Screen and try to align your display. The other thing is that make sure there are no germs below the frame of the display (between the screen of the display and the frame that is holding it) . You can use small cutter to remove the germs, but be very careful not to hurt your display.

visit howardforums.com and search for the solution to cid/sim unlock the mda.