20 Most Recent Zebra P120i Thermal Card Printer - Page 7 Questions & Answers

Have you tried the AutoSense, Media Calibration? the printer self adjusts for the labels you are using. The procedure starts on page 11 of the manual. Incase you have misplaced your manual you can download one here.... https://ups.zebra.com/UPSZebraWeb/support/downloads/2348P/pdf/2348P-user-manual.pdf Good luck

It could be faulty PCB, buy a new one, It's not worth fixing.

it blurry cant find its user guide

Ethernet cable Must be plugged in and the printer must be ready for about 60 seconds before you enter the menu or the Ethernet settings will not show up.

Whats the question Jon?

Zebra printers are not really made to print PDF files, if the only option is PDF I'd recommend switching to print on a laser. Also open the PDF and see if they are correct in the original doc

Recalibrate the printer, Verify that you upper media guide(snap plate) is installed in the machine. Then replace your ribbon sensor. Snap plate MRP provides IT Parts Product Supplies and Services Ribbon sensor MRP provides IT Parts Product Supplies and Services

you might have a 203dpi print head in one. you will physically have to remove and check the part # on the print head to verify it is a 300dpi [email protected]

http://www.animalfactsencyclopedia.com/Zebra-facts.html

Found the company site that has many postings, also you can submit your case to them online for a response. Zebra Technologies Results Zebra Technologies Submit Case Online

the printer only prints what the computer tells it to if you want it to print in a language type out what you want ,highlight it and then use a language font to change it , then print it out.

I don't know if any errors with red blinks for the 2844, but the printer will blink red five times if you power it up with the button held. Is the button possibly stuck down?

Can you attach a sample? Config would be fine.

Unless a driver is installed and the driver required is not integral to the windows 8 library of drivers , the printer will not work. It must have the appropriate driver to function. It may be that the printer is a few years old and perfectly functioning but without the driver it is just a paperweight. Tome manufacturers do not update drivers wben anew operating system is released because they want the public to shell out for more hardware. Companies such as HP avoid this usually and provide great support for their equopment. Certain Japanese manucacturers are not so good. I believe your printer may be unsupported by windows 8. What is make and model please?