20 Most Recent
- Page 4 Questions & Answers
No sound out of any speakers on Alpine model CDA-9855
Make sure even thought the wires are the same color that your car color code also matches the color code of the Head Unit if not stock radio then the color code would be in your cars manual book or find it online in the image section of the browser you are using or better yet just order your self the radio adapter for your cars model for that type of head unit your installing or troubleshooting in your case and make sure all wires and positive wires are hooked up properly because some devices will not work if all the wires are not wired correctly meaning left terminal to left and right terminal to right speaker and positive and negative wires installed correct as well.. Hope this helped..
Need radio code for Alpine
When you disconnect your battery and then reconnect it again, it disables the radio. This is an anti-theft protection for your car radio. The enable your radio the activation code is in your vehicle owner's manual. If you do not have this code you need to go to your vehicle manufacturer's service centre and get them to enter this code for you.
Changing Alpine Models, What do I need?
Make for make and same sizes should be the same connectors.
you can find out using the google search
year make model wiring harness
make model wiring diagram (of the new one)
Hi ive got an 020366
I presume you have a "Renault" Laguna?
Here is a photo of the Renault wiring colours (Note: the tweeter wires have been custom-joined at the front speaker terminals - this is optional):
However, I strongly recommend you purchase an aftermarket "Renault-ISO/ISO-Alpine Harness Adaptors", which connects your Alpine unit directly to your vehicle's factory harness.
These ISO car audio harnesses can be purchased fairly cheaply online or at your local automotive car audio parts centre.
I get power to the stereo but no sound comes out
According to the manual for the Alpine CDE-102, the message "DC ERROR" is displayed if there is a short to ground in the speaker wiring. Check all of your speaker wires and make sure that no bare wire is shorting against the vehicle metal or against other wires. Repair or replace the wire as necessary. After correcting the problem, set POWER IC to "POW ON" according to the instructions in your manual.
Hope this helps.
Not finding what you are looking for?