20 Most Recent Maytag MMV5000 Microwave Oven - Page 4 Questions & Answers

Hi, My research came up with a shorted keypad (shorted key). The part number I came up with was W10258190 this is for stainless. I hope this information helped. Good Luck I’m happy to help further over the phone at https://www.6ya.com/expert/gere_bf68e6055dd61249

The SE error code means you have a shorting membrane keypad.

you would need to replace either the membrane keypad or the control panel frame assembly, which comes with a new keypad already installed.

unfortunately, those parts for this model seem to be unavailable. So the only option would be if you can find a used or "New Old stock" part on eBay or at a local or online appliance parts store.

If you can find either of these parts, that will fix your microwave:

DE94-01386S ASY CONTROL-PANEL (STL)

DE34-00233N SWITCH MEMBRANE (BLK)

The support page for your microwave is here, where you can find manuals and a helpful exploded view part diagram.

https://shared.whirlpoolcorp.com/product_literature/search_results.jsp?searchTerm=MMV5207BCS&siteCd=WHRCOM&userType=Consumer

Good luck.

Replace the MW

The service manual for model MMV5165 is here at my Web site.

Chances are you have an issue with a door switch or door switch mount. See my help files here: http://www.microwavecontrol.com/safety.htm http://www.microwavecontrol.com/disassembly.htm http://www.microwavecontrol.com/doorsw.htm If you need further help, e-mail me through my Web site (above) with your full model number and detailed symptoms.

Maybe on control panel or inside door.

If you have a stargate chassis maybe look near the power cord, and least they are not on the Antares board of my buggy AKZ 430 : Whirlpool Oven AKZ430 goes to F03 mode in couple of minutes even after...

Find your model's support page here: http://shared.whirlpoolcorp.com/product_literature/search_results.jsp?searchTerm=&siteCd=WHRCOM&userType=Consumer Then enter your full model number in the "Search again" box.

https://www.repairclinic.com/UserManual/75608c343f8549028da3cf6e0814364c/Maytag-Microwave-Repair-Manual-MMV5100AAB-MMV5100AAQ-MMV5100AAS-MMV5100AAW.pdf

Microwave ovens often have a 12-hour clock and have no need for AM/PM.

Does everything else work?? If so, its just the turntable motor, simple to replace. there are three or four screws under the bottom. UNPLUG the microwave first. Double check before ordering...but .. Here is the one you need: Turntable Motor DE31 10172C

Your touch pad is connected to your board with a ribbon wire, it has probably come loose. Unplug the unit and remove the face plate. Pull it back and you will see the wire, it looks like a ribbon, push it in tight, replace the face plate and it should work properly. I see this happen all the time.

unrepairable unit junk it

Check this site for parts you are talking about. Search Over 2 1 Million Appliance Parts