20 Most Recent
Maytag MMC5000 Microwave Oven - Page 9 Questions & Answers
Maytag microwave model mmv1153baw light won't shut off and won't start
Hi,
Either the latch in door (spring related) is not in the correct location or you have a door switch issue and its not expensive to fix if you husband is handy. Part number you can use is 28QBP0495 or the factory one 3405-001034 (more expensive). This issue is common and these switches are located inside the control panel on the left side, the switch you seek is the lowest one in the bracket of three. Good Luck and I hope this helps. I’m happy to help further over the phone at
https://www.6ya.com/expert/gere_bf68e6055dd61249
Error code showing
Unless there is grease or moisture on the control circuit board, error code "SE" means you have a shorting membrane keypad.
On this model, the membrane keypad is not available as a separate part, so the control panel frame assembly (which comes with a new keypad) would have to be ordered and replaced.
It's actually a pretty simple DIY repair.
It is part number W10258189 and you can get it for about $129 (subject to change) from the Pros here.
There is also a video here showing how to remove a typical over the range control panel assembly in under 5 minutes.
Then you unplug the keypad as per the photo below.
Some connectors have a lock.
Then move your circuit board into the new frame. Be careful, the display is made of glass.
Not finding what you are looking for?