20 Most Recent
iLO MP3 Player - Page 8 Questions & Answers
File system error
THis means that you have to format or update the unit using the Ilo software that is installed on your computer which came with the CD for the unit. This means that your unit needs an update which the software can do.
I hope this has answered your question sufficiently. If you have more questions please post a reply. Thanks.
Help Please
To download music to it connect the usb cable to your pc and go on limewire.com, get the basic account and go on the program search songs and once you connect th player this thing shouldve come up and u shoulve clicked view all files and minimize after you download some songs click explore song and reopen that other thing make those two pages fit st once and drag song to music,
Hope this helps!(:
Ilo mp-556 driver
Try this: disconnect the player from the computer, turn it off, hold in the volume + button, and reconnect the player to the computer while holding the volume + button in. Keep holding the volume + button for an additional 5-50 seconds. Windows should eventually go into recovery mode and revive the player- it will pop up a window that says Found New Hardware Wizard
Help
maybe you have to charge it longer if you did send it back
Can't load the cd for
You must have Xp 64bit. You will have to manually download and install drivers offline
Just search your computer model then type drivers after it on google
Ilo MP-556 Will not turn on
There are two ways to format an Mp3 player - one on the computer
itself, and one in Windows Media Player. Both methods will end up
erasing all the songs on the player, but the player will be "good as
new" after that. Sometimes reformatting in this manner will override
the player's native formatting and cause problems - this can be
reversed in most cases by updating the player's firmware. Firmware
upgrades are available from most manufacturers' websites.
WARNING: The following procedures will erase all songs on the player.
Check if the file system is NTFS. If yes, format it to FAT or
FAT32. - Connect player to computer, double-click my computer, right
click on icon of mp3 player and select format. This only applies to
Windows-based computers.
You can also format the player in Windows Media Player itself:
Connect your Mp3 player to the computer and open Windows Media
Player. Click on the Sync tab. Pull down the drop down menu underneath
the Sync tab by moving your cursor over the Sync tab and left clicking
on the little black arrow underneath the Sync tab. Highlight "name of
Mp3 player here 1GB" (wording may vary slightly), and then select
"Format." - this should erase everything.
-Tha Mp3 Doctor
Sylvania mp3 player needs upgrading
Sigmatel chip in the Sylavania player- normal. Go to Sylvania's website, and get the upgrade that it is looking for. support --> enter model #
Windows vista
You need to go to your mp3 players website and see if they have a driver that works in Vista.
So far my Dell jukebox does not work in Vista since Dell did not complete the driver yet.
It seems that there is alot of hardware and software that just does not work in Vista and hopefully in time we will be able to get the right drivers. Good thing Vista is only on my laptop.
Keep checking the site for the updated driver.
Ilo 3.120 dg2.
You may not have the right software for your MP3.
There are specific site's on the internet where you can recieve software for your MP3.
iTues.. so on do a bit of scopping around.
Accurian mp3
There are two ways to format an Mp3 player - one on the computer
itself, and one in Windows Media Player. Both methods will end up
erasing all the songs on the player, but the player will be "good as
new" after that. Sometimes reformatting in this manner will override
the player's native formatting and cause problems - this can be
reversed in most cases by updating the player's firmware. Firmware
upgrades are available from most manufacturers' websites.
WARNING: The following procedures will erase all songs on the player.
Check if the file system is NTFS. If yes, format it to FAT or
FAT32. - Connect player to computer, double-click my computer, right
click on icon of mp3 player and select format. This only applies to
Windows-based computers.
You can also format the player in Windows Media Player itself:
Connect your Mp3 player to the computer and open Windows Media
Player. Click on the Sync tab. Pull down the drop down menu underneath
the Sync tab by moving your cursor over the Sync tab and left clicking
on the little black arrow underneath the Sync tab. Highlight "name of
Mp3 player here 1GB" (wording may vary slightly), and then select
"Format." - this should erase everything.
-Tha Mp3 Doctor
Memorex mp3 player won't sync up
Memorex mp3 player supports audio: MP3, WMA, WMA-DRM 10, WAV
Check your audio tech specs if they are beyond the scope your player can carry.
If not, you need to convert audio with video or audio converter.
If you need to do so, search for wondershare on google.
Not finding what you are looking for?