20 Most Recent
Insignia IS-DVD1001 DVD Recorder/VCR Questions & Answers
Recorded play back is fuzzy
MOST LIKELY the RF out put signal is the same as a local tv chanel 1) try menue change rf output suggest rf 68! OR connect av leads (red white yellow)from the output of your vcr and connect the other end to an Av input eg AV1 on your TV use tv remote to select the AV input
6/3/2016 4:12:45 AM •
Insignia...
•
Answered
on Jun 03, 2016
Have sound but no picture
I would check the connections to make sure they are good. The video connection could have gotten knocked loose. Sometimes they just come loose.
5/15/2014 9:24:38 PM •
Insignia...
•
Answered
on May 15, 2014
My dell latitude D820 lap top just stopped decodeing dvds
To change the Region code on your DVD player, open Control Panel - System - Hardware - Device manager, and click on DVD/CD ROM drives, then right click on the DVD drive and click Properties then click on DVD Region. You can enter a new region and it also shows you how many changes have been made. NOTE you can make only 4 changes and the player will lock permanently on the 4th change. If you want to play DVDs from any region you maybe able to upgrade the firmware to make it region free BUT if you make a mistake or installed the wrong firmware the player will be a piece of junk. The best solution to make the player region free is to install a piece of software (Passkey for DVD) that allows you to play DVDs from any region and Passkey for Blu-ray that allows you to play Blu-rays from any region. There are several available on the Internet but my favourite is DVD-Region Free From: -
www.dvdfab.com/products,free.htm
2/26/2013 8:07:35 AM •
Insignia...
•
Answered
on Feb 26, 2013
Not finding what you are looking for?
