JVC KD-G720 CD Player - Answered Questions & Fixed issues
Set clock
The clock-setting instructions are in the "General settings - PSM" section beginning on page 14 of
the manual. Pay particular attention to the "CLOCK H" and "CLOCK M" entries on the next page.
I need the plug for
your can buy the plug at your nearest electronic shops.... just give them the model number
Playing my "Zune" through the USB input
I dont think a zune is capable of being directly read from in a unit such as this.
When you plug your zune into a computer for instance, you need special software to upload and edit music on the device. I dont think the device pops up as a drive in "my computer"
if you are using a drive "usb key" that does simply pop up on a pc, and it works on your deck, this would prove to me that your deck is simply not capable of reading the info on your zune.
aka, there is no way to install drivers on your deck that are capable of reading off the zune. Your usb key works because it simply reads as a drive.
this isnt really a solution, but maybe check with the manufacturer of your deck. send them an email and see if there is any way to make a zune read properly.
I have a jvc kd-g720 stereo in my car and when I
if you are plugging your ipod into the usb port of the kd-g720 it won't play all your songs because this particular radio only plays mp3s through the usb port. ipods play both mp3s and mp4s. so those 49 songs you're hearing are the mp3s on your ipod. in order to play all the songs on your ipod you must buy the cord that plugs in the back of the radio that will connect to your ipod. sorry for the bad news man. i had the same thing happen to me.
Eq wires
Red=power black=neutral. Yellow=back-up for keeping radio stations and the memory (put this in with the power cable + ), all the speaker wires should have little stickers on relating to to which corner or the car they belong to? is there any other colours there?
Thanks
Mark
Setting the clock
Press and hold SEL until menu appears
Using the scan button (FWD/REV), select Clock H
Using the volume knob, set the value
Using the scan button (FWD/REV), select Clock M
Using the volume knob, set the value
Press SEL to save and exit
CANNOT SET MY TIME
Try this. I think it was page 7 or 8
http://resources.jvc.com/Resources/00/00/93/GET0336-001A.pdf
JVC KD-G720 car stereo - how to change the time?
Press and hold the SEL button to bring up the settings menu. Press and release the tuning (>>>) buttons until you see CLOCK H. Turn the volume knob to select the hour. If necessary, press (>>>) for CLOCK M; adjust the minutes setting with the volume knob. Press SEL when you're finished.
An owner's manual can be downloaded from JVC at this link:
http://books.jvcservice.com/booklist.asp?Model=KD-G720J
Not finding what you are looking for?