20 Most Recent Baby Lock Eclipse Serger - Page 9 Questions & Answers

0helpful
1answer

Bobylock 5260 serger where is the lever to raise the feed dogs?

The feed dog lever on the Babylock 5260 serger is located on the right side of the machine, near the front. It is a small lever that can be moved up or down to raise or lower the feed dogs. To raise the feed dogs, you will need to push the lever up. If you are having trouble locating the lever, you can consult the machine's manual or contact a Babylock dealer or repair technician for assistance.
2/26/2023 4:41:20 PM • Baby Lock Sewing... • Answered on Feb 26, 2023
0helpful
1answer

Is there like a reset switch on Baby Lock Ellageo embroidery machine?

The Baby Lock Ellageo embroidery machine doesn't have a reset switch, but you can try the following steps to troubleshoot the issue:
  1. Turn off the machine and unplug it from the power source for a few minutes.
  2. Plug the machine back in and turn it on.
  3. Check the power cord and make sure it's properly connected.
  4. Check the fuse and replace it if necessary.
  5. Check the embroidery hoop and make sure it's properly attached.
  6. Check the bobbin and thread and make sure they're properly inserted and tensioned.
If none of these steps work, it may be a problem with the machine's electronics, and you may need to take it to a Baby Lock authorized dealer for repair.
2/24/2023 6:44:24 AM • Baby Lock Sewing... • Answered on Feb 24, 2023
0helpful
1answer

How to thread a baby lock model 653

12/18/2022 1:18:08 PM • Baby Lock Sewing... • Answered on Dec 18, 2022
0helpful
1answer

How to thread a baby lock 653

12/18/2022 1:16:07 PM • Baby Lock Sewing... • Answered on Dec 18, 2022
0helpful
2answers

How do I find the Total Stitch Count on the Baby Lock Destiny II?

Hi, I have the Dream Machine so they are very similar when you turn on touch the icon at the top of the screen that looks like a document that puts you in the settings. tab thru until you come to the page with Stitch count and whether or not it has the update.
12/15/2022 6:23:58 PM • Baby Lock Sewing... • Answered on Dec 15, 2022
0helpful
1answer

Baby Lock Sewing Machine won't cut

check if thread has balled up in that area if so then dig it out with a paper clip, dental pick or a razor blade. there is usually an adjustment but i suspect there is a thread jam
12/9/2022 9:09:53 PM • Baby Lock Sewing... • Answered on Dec 09, 2022
0helpful
2answers

My baby lock bl5260 serger starts ok but slows down and then stops

If it is a mechanical machine (not computerized), it could be seizing due to old oil that has dried. Mechanical machines, especially sergers, need frequent and thorough oiling (interior moving parts) using a good quality sewing machine oil. Avoid trying to run the macchine until you can get it serviced or the motor could be damaged. ...
11/9/2022 1:22:28 AM • Baby Lock Sewing... • Answered on Nov 09, 2022
0helpful
2answers

I have a Baby Lock Valiant 10 needle with trimming sensor error. How do I clean this area?

Hi, if the area is hard to reach, please use a q-tip and your choice of soap to clean the area. You might use a second q-tip to dry the area as well. Thank you.
11/1/2022 12:26:32 AM • Baby Lock Sewing... • Answered on Nov 01, 2022
0helpful
1answer

Baby Lock 5360E. How do I fix feed dogs on it? They are not moving.

That normally happens if you are in embroidery mode, but not on a Serger. https://www.google.com/search?q=baby+lock+5360e+feed+dogs+not+working ..
10/23/2022 11:44:10 PM • Baby Lock Sewing... • Answered on Oct 23, 2022
0helpful
1answer

Can I get manufacture date of a Baby Lock Crown Jewel III longer machine with the serial number?

Question moved from Washing Machines category. Contact Baby Lock direct.

Crown Jewel III - 104 Machine - Baby Lock Products

https://babylock.com > machines > crown-jewel-iil Effortlessly control the motion of the Crown Jewel from either end of the machine with the comfort-grip handles. Options are right at your fingertips with push- ...
10/11/2022 8:04:11 PM • Baby Lock Sewing... • Answered on Oct 11, 2022
0helpful
1answer

How to replace the tension knob on baby lock blind hemmer

If you have all of the parts your in good shape. Otherwise you'll need to order the whole assembly. Is the whole assembly loose from the machine or is it in pieces? Sal the Sewing Gal
10/6/2022 7:58:50 PM • Baby Lock Sewing... • Answered on Oct 06, 2022
0helpful
1answer

My baby lock tiara starts sewing fine, but after a few minutes it stops and says needle walk failure

You must take three steps backwards and restart the machine.
9/25/2022 10:56:39 PM • Baby Lock Sewing... • Answered on Sep 25, 2022
0helpful
1answer

Baby Lock Flourish 2. The handwheel is bound up?

Question edited for clarity. Question moved to Baby Lock. If it binds and locks up, you can force it in the direction of travel using the handwheel. Remove the needle and the bobbin and run it full speed for 15 seconds. If it continues to do it, you need to take in for service and more importantly, timing.
8/10/2022 1:04:44 AM • Baby Lock Sewing... • Answered on Aug 10, 2022
0helpful
1answer
0helpful
1answer

What is age of Baby Lock Crown Jewel digital quilting machine? The serial number is C11004674

Question edited for clarity. Duplicate post deleted. Refresh the page to see your question posted. This machine is not old enough for the sites that keep serial numbers of historical machines. You would have to contact them direct. https://www.google.com/search?q=baby+lock+crown+jewel+serial+numbers ..
4/7/2022 2:29:44 AM • Baby Lock Sewing... • Answered on Apr 07, 2022
0helpful
2answers

Baby lock decorators choice model-error code F01

check with babylock customer service about the code
3/21/2022 5:37:36 AM • Baby Lock Sewing... • Answered on Mar 21, 2022
0helpful
1answer
Not finding what you are looking for?
Sewing Machines Logo

184 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Baby Lock Ellure
Baby Lock Ellure

212 Questions

Baby Lock Esante
Baby Lock Esante

195 Questions

Baby Lock Imagine
Baby Lock Imagine

117 Questions

Baby Lock Evolve
Baby Lock Evolve

66 Questions

Baby Lock BL1556
Baby Lock BL1556

46 Questions

Top Baby Lock Sewing Machines Experts

Cindy Wells

Level 3 Expert

6688 Answers

vince

Level 3 Expert

2530 Answers

NOEL
NOEL

Level 3 Expert

8606 Answers

Are you a Baby Lock Sewing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Baby Lock Sewing Machines

  • Baby Lock Sewing Machines

Most Popular Question

babylock serger question

  • Sewing Machines
Loading...