20 Most Recent Janome Memory Craft 9500 Computerized Sewing Machine - Page 4 Questions & Answers

yes it should be in your manual. Moving parts need oil, use only clear machine oil no 3-1

Janome Memory... | Answered on Oct 04, 2010

I have had the same thing on my 11000 Janome. Asked the repair guy, but did not get an answer perfectly. It could be the mother board from what I gathered, it happens very infrequently but you loose everything and have to start over again. Very frustrating if you made any alterations to the pattern-I have learned to save everything in case it happens. Then I just start over but it is at least saved.

Janome Memory... | Answered on Oct 04, 2010

You had to transfer the design into your memory card from your pc.
now,you can use your pc card adapter to transfer that design into your machine.

1 thing more understand that you transfer nothing into a thing like pc card adapter , you transfer it into memory card and make this memory card read to your machine by pc card adapter

i have checked and your machine supports .jef format so there is no compatibility issue.

see, The actual process is this

1.Included is a 256MB CompactFlash memory card to store your embroidery designs.
2.With the USB CompactFlash Reader/Writer, you will be able to download designs from the internet and save them to the memory card.
3.With the PC Card adapter, you will be able use the designs on the Janome 9500, Embroidery Machines.

this will solve your problem.
Please accept this solution if you are helped.

Janome Memory... | Answered on Oct 02, 2010

judging by the picture, it loolks like the machine is the same as the 9000 and 8000, in that there is a slot for the disc roughly near the on/ off button. When the disc is in all the way, a button pushes out and that;'s how you get it out again

Janome Memory... | Answered on Sep 13, 2010

i think you have something catch on the tension guides. Try to clean out anything you can see and pull a thread towards the needle. I have done this with a small knot to snare anything but be gentle. Also, rethread carefully.
Try cleaning the bobbin case too

Janome Memory... | Answered on Sep 13, 2010

the bobbin case will fit in easily when you have it in the correct position; the bobbin part in to the front, turn slightly to the left then push down. look at the manual, they are easily found on line if you have lost it. you need to take the metal plate off first by removing the screw, which is how you get the case out in the first place

Janome Memory... | Answered on Sep 11, 2010

l am having a problem opening in customizer 10000 for my 300e to download designs to flashcard it comes up fat error have tried on another hard drive is the same problem it is not that l havent done this before all has been going ok till now could you please advice me as to what l can do. [email protected]

Janome Memory... | Answered on Aug 19, 2010

Google "Stitch ERA Universal" its a free digitizer. you can convert clipart into jef files or many other types of machines. it works well with my wifes janome 9500.

Janome Memory... | Answered on Aug 17, 2010

Go to radio shack, i paid about 17.00 for mine, take your machine in and they will give you what you need, ty and have a great day.

Janome Memory... | Answered on Jun 21, 2010

If it was the motor belt, no problem, if it was the timing belt thgen major problem which means a shop repair.

Janome Memory... | Answered on May 29, 2010

This one - http://www.allbrands.com/products/abp02933-0145.html#See
indicates it works with Janome jef format.

You can always contact the vendor for more info.

Janome Memory... | Answered on Feb 20, 2010

Just visit us at www.janomestuff.com

Janome Memory... | Answered on Sep 24, 2009

make sure your bobbin thread is in tension spring on bobbin case, if it is tighten your bottom tension.

Janome Memory... | Answered on Aug 18, 2009

check out pepsilady's solution it explains how to get the embf5 folder on your card.

Janome Memory... | Answered on Jun 29, 2009

The solution was sooo easy.....one of my online embroidery groups suggested to put the card in my Janome and let the machine format it. It took about a minute and did not tell me what it was doing..and It worked! It put two folders on my card, Emb5 and ord#5, and I was to copy the jef files into the Emb5 folder, which I did and bingo! my Janome 9500 read the card and produced a screen with my jef files in it. I am a happy camper....I don't know if this works with all Janome machines but it did with mine.
Thanks for being here to help.
Pepsi lady

Janome Memory... | Answered on Jun 29, 2009

Not finding what you are looking for?
Janome Memory Craft 9500 Computerized Sewing Machine Logo

104 questions posted

Ask a Question

Usually answered in minutes!

Top Janome Sewing Machines Experts

Douglas Plant
Douglas Plant

Level 2 Expert

222 Answers

Irene Tulloch

Level 2 Expert

498 Answers

Cindy Wells

Level 3 Expert

6114 Answers

Are you a Janome Sewing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Janome Sewing Machines

  • Janome Sewing Machines

Most Popular Question

put space between letters m c 9700

  • Sewing Machines