Konica Minolta DiALTA CF910 Copier - Answered Questions & Fixed issues

what the code Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

try this site Service manuals electronic components datasheets and equipment schematics... Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

The charge corona wires and or the housing need to be replaced. the housing holds the wires which a very thin a carry a H V when operating during the copy/print cycle. Located above the drum the charge the drum. if not either of those you mite need to replace the H V board. Sir/Mam you are dealing with a legacy Minolta printer/copier. First Generation Color. You will have do some serious google. Mite try this site as a start for parts and this site for service manual Currently Konica Minolta no longer holds the service manuals for this series of machines Precision Roller Printer Toner Cartridges Parts and Supplies Office... Service manuals electronic components datasheets and equipment schematics... Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

doubt you find a board for that machine, very very old, get a new machine Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

No such code for a CF910 what is the model of your machine? Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

Reset it, front door has a door switch Open it about 10 secs. Closed it while its turn On.

I am going to start by saying this. I am suggesting to you what I would do, I am not responsible for what you do to your machine. This is an older machine. The code is saying there isn't a good connection between the 2 boards in the back of the machine. FIRST, TURN THE MACHINE OFF AND UNPLUG IT FROM THE WALL! I cant stress that enough. Then, I would take the back cover off of the machine. Then, lightly press each and every cable in, to try and reseat the connections. Try turning it back on, staying clear off the boards in the back. If that doesn't work, turn the machine back off and unplug it from the wall. Then go back to the boards. Try unplugging each and every connections on both boards. Just unplug one at a time and plugging it back into the same hole. If this still doesn't work, you have a bad PWB-B board.

1 paper tray malfunction.Open and close front door.

just before pressing copy button just press the number of copies you need and go.
good luck

Hi on the machine there is a zoom setting you can just select 11x17 to 8.5x 11 and this will reduce it automatically for you

this is an error with the fuser unit temp there is a reset switch it is under by the interlock swith you should be able to reset it if it keeps coming up you will need to replace parts on the fuser unit it is an issue with low temp

Hi,
Please download your driver here : http://ptf.com/vivitar/vivitar+vivicam+55+driver/index3.html

The problem is in the fun motor section.Verify the exhaust fun mototr and the transfer fun motor.

Sir CF910 is a legacy equipment, try going to konicaminolta US web site look up you machine and down load the driver for it if a available once again CF910 is a first gen color machine from minolta, Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

slide the drum unit out and see if the line on the drum. check your fuser roller for any scrach.

when i moved this unit fluid came out like oil is this a major problem

Try turning off the machine, pushing and holding the utility key and turning it on, don't take your finger off the key. You should see a blank screen with one touch button on it saying Trouble Reset. Press it, if the machine doesn't reset itself turn it off and one again.

Corona wires are used in the transfer/sep assy and drum charge. C0200 is code if they fault. To reset the machine open and close the front door, if ithe code comes back the corona wires and or assy need replacement Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

you probably need you fuser rebuilt. the heat roller melts the toner into the papew. it is covered in teflon. over time the teflon wears off anf toner sticks to it causing paper jams when the copier gets hot

Manual by pass paper lifting failure.Check the manual paper feed pick up solenoid and the tray lift up sensor.Verify the paper misfeds and power supply unit.