20 Most Recent
Questions & Answers
Malfuntion Call a technician Code C0500
FUSER CODE. NOT SURE ON THIS SAME MODEL BUT ON OTHER DiALTA'S YOU NEED TO DO WHAT IS CALLED A "WARM RESET OR WARM REBOOT". tURN COPIER ON AND FIND A VER SMALL HOLE (PAPER CLIP SIZE) ON KEYBOARD OR SOME TIMES ON RIGHT HAND SIDE OF KEYBOARD, SOME TIMES SMALL SQUARE HOLE. STICK PAPER CLIP IN HOLE AND THAT WILL BRING YOU INTO SERVICE MODE. PANEL WILL SAY TROUBLE CODES, DEPRESS. TURN COPIER ON AND OFF AND SEE IF IT GETS YOU GOING. IF PROBLEM COMBES BACK YOU HAVE A BAD FUSER, EITHER FUSE, THERMISTER OR CONNECTORS.. GOOD LUCK
on May 09, 2015
What does the error C3310 means
I am going to start by saying this. I am suggesting to you what I would do, I am not responsible for what you do to your machine.
This is an older machine. The code is saying there isn't a good connection between the 2 boards in the back of the machine. FIRST, TURN THE MACHINE OFF AND UNPLUG IT FROM THE WALL! I cant stress that enough. Then, I would take the back cover off of the machine. Then, lightly press each and every cable in, to try and reseat the connections. Try turning it back on, staying clear off the boards in the back. If that doesn't work, turn the machine back off and unplug it from the wall. Then go back to the boards. Try unplugging each and every connections on both boards. Just unplug one at a time and plugging it back into the same hole.
If this still doesn't work, you have a bad PWB-B board.
on Nov 14, 2014
Not finding what you are looking for?