20 Most Recent Konica Minolta bizhub C351 All-In-One Laser Printer - Page 8 Questions & Answers

Firmware is corrupt. you must reload it. need help contact me

open and close door, do not turn off, still not?? then (trouble reset) turn off then hold utility counter buton down then turn on. hold for 30-sec or so, when ttrouble reset comes up press then press start then turn off then on your fixed

bypass tray attributes are not setup properly

update driver

yes you can set up factory default in the utility/counter button then user settings, its in there

go to pagescope (web interface) by typing the IP address of the copier into any webbrouser address line. then go to scan and wallllah?? you got the settings

Sounds like a driver issue. look to see if there is a new driver for your OS. then get back to me i can help

in the driver after you install it you have to setup the options and then it will work... check out the properties of the driver you installed you will find it...

• The 1st Image Transfer Retraction Position Sensoris not activated (retracted position) within 5sec. after the 1st Image Transfer Pressure/Retraction Motor has started turning during asequence of the Transfer Belt's retracting motion.• The 1st Image Transfer Retraction Position Sensoris not deactivated (pressed position) within 1sec. after the 1st Image Transfer Pressure/Retraction Motor has started turning during asequence of the Transfer Belt's pressing motion.you need the retract motor or the sencor that sees it

you go to the setting you want and then to user setting setup for curent setting and walllahhh

well there is a chip on the image unit that image unit (all colors) you need special chip writer to reset. you may need to just buy a new unit or drop me a line i may be able to get one...

you must get a 2 line fax card

is there something in the que??? if there is a job in proccess then it will not give you proper selections or the firmware is corrupt

YES!!!! it is very salvageable.... it is easy to fix this machine. i can load the correct firmware on a card and give instructions on how to load if needed....drop me a line

it may.... what have you tried?? you need to get into admin mode then set ip there....

I am wondering what color of toner it is asking you to replace?? is it maybe change waist toner container?? because this is different. you can replace the container or empty it (messy but it works)

its in the pagescope (in your webbrouser type the IP address) go to admin mode and click the scan settings then address book and enter the address for the person you want to scan too.. i can help in more detail if needed

yes it can but its not the lcd its firmware corrupted, i can help you to do fw if needed

set up the original size in scan settings

download driver and plug it into your computer via the network cable. go into admin mode and setup the ip address and print