Mpio FY500 MP3 Player - Answered Questions & Fixed issues
2 Answers
Computer Won't Recognize Device
Try plugging your USB cable (attached to your player) into the computer before you turn the computer on and boot up . . . I had this same problem with a flash drive that the computer would not recognize if I plugged it into the computer while the computer was already on.
Mpio FY500 MP3...
|
Answered
on Jul 28, 2012
|
269 views
1 Answer
Invalid MEMORY...help!!
Para quien tenga este problema con estos mp3 y todavía no lo haya tirado, esto es lo que hicé yo el otro día que lo encontré por ahí tirado:
- Quita la batería del mp3.
- Pulsa los botones de "Func" y "Play".
- Sin soltar los botones, conecta el mp3 al usb del ordenador.
- Aparecerá un mensaje para formatear el mp3.
- Suelta los botones y pulsa el botón "Rec".
- El mp3 comenzará a formatearse solo y volverá a funcionar.
Espero que os sirva. Un saludo.
First of all, sorry for my English
If you still have this mp3 or for anyone who sees this solution, this is what I did:
- Remove de mp3 battery.
- Press and hold down de "Func" and "Play" buttons.
- Connect the mp3 to computer's usb.
- A message of formating the mp3 will appear.
- Release de buttons and press de "Rec" button.
- Formating will start and in a few seconds the mp3 will work again.
Hope it works... it does in a FY400
Mpio FY500 MP3...
|
Answered
on Nov 20, 2010
|
216 views
1 Answer
Where can i send my fy500 to get the battery door
I've broken 2 battery doors now. It doesn't take much. Got the 1st one replaced under store return policy. Now it's way past the warrantee period.
I've resorted to tape and elastic bands. If you attach the elastics from opposite corner to opposite corner, it works pretty good and still doesn't block the front buttons.
Mpio FY500 MP3...
|
Answered
on Dec 02, 2009
|
198 views
1 Answer
Missing Music
right click on computer then
1. click properties
2.hardware
3.device manager
4.universal serial bus controller(open the + sign)
5.click upper one double click
6 go to driver
7.click on the update driver
8. then choose second one (advanced) then next
9.click don't search
10.then next next if it is over
same process with anotherone then restart your computer and enjoy you ipod
and don't forget to give rating
Mpio FY500 MP3...
|
Answered
on Dec 02, 2007
|
149 views
1 Answer
Hmm...well wnhen ever i charge
Either the device is bad, the pc port is bad, or the software is faulty. Try connecting to different usb port, then a usb port on a different pc with a compatible os. If still not recognized, then there is physical damage to player.
Try this: disconnect the player from the computer, turn it off, hold in the volume + button, and reconnect the player to the computer while holding the volume + button in. Keep holding the volume + button for an additional 5-50 seconds. Windows should eventually go into recovery mode and revive the player- it will pop up a window that says Found New Hardware Wizard.
Mpio Audio...
|
Answered
on Jul 05, 2008
|
99 views
Not finding what you are looking for?
