20 Most Recent Mpio FY500 MP3 Player - Page 2 Questions & Answers

My sub out isn't working. Infinity sub works fine with other sources

Audio Players &... | Posted 14 hours ago | Be the first to answer

My victrola Model # VTA-200B seems not to be working properly it does not have an audio output it doesn't make any sound but everything it seems to be working as right,THIS HAPPENed 2 week of new

Audio Players &... | Posted 18 hours ago | Be the first to answer

**** smith A5146 MP3 player - how do i create

Only 1 playlist is allowed. This is called "favourite".

When playing a song....hold/press the = button.

A popup will appear.

Choose favourite.....and it will be added to your favourites playlist.

I haven't found any other way to create a plylist on this device.

Stu

Audio Players &... | Answered on Jan 22, 2021

1 Answer

Why does the ptc 6.0 heats up when I connect the second o d EL084 Tube ,in Laney cube 12R,but with single tube it does not heat up.?

Faulty EL84 or bias incorrect or the PTC is faulty.

Audio Players &... | Answered on Jan 21, 2021

2 Answers

Re: Yamaha RX V670 Receiver Powering Off

I have found there are capacitors failing through the output circuit. Look for 10, 33, 47, etc.. microfarads.In that range. I charge typicaly 150 to $200 with parts on something like this. Larry's Electronics [email protected]

Audio Players &... | Answered on Jan 21, 2021

0 Answers

My speaker doesn't make any kind of sound when u plug in aux cord like other one does...its like speaker came undone or something...how do I get to speaker wire to make sure its still connected

Audio Players &... | Posted on Jan 20, 2021 | Be the first to answer

2 Answers

Ipod ma446zp

Not all iTunes video can be transferred to iPod, please make sure your video is compatible with iPod. If the video resolution or video bit rate beyond iPod limitation, even though they are mp4 video, you can't upload them to iPod. For example, some iTunes purchased movie are High definition movie, the resolution is too high to play on iPod, you can't sync it to your iPod. For more information about iPod compatible video, you can visit apple official website. Or you may take a look at this step by step direction, it's about how to convert and put video to iPod, it works pretty well for me.
http://www.dvdintoipod.com/how-to-convert-dvd-video-to-ipod.html
Hope it helps. Contact me if you need further assistance.

Audio Players &... | Answered on Jan 20, 2021

2 Answers

McIntosh MC7106 Amplifier not powering up

It can be a variety of reasons but I feel that your amplifier is shutting off after powering on. There is nothing that can be done from the outside but If you are familiar with basic electronics and can attempt to take a look I can try. Open the set after you have pulled off the power, then look into the set and tighten all the connectors and cords. Power on and see where the click comes and goes off. If the relay is not holding on then your protect circuit is shutting it off. Armed with a multimeter turn on the power and check if the main +B power is coming to the output stages.If there is momentary swithch on , then disconnect power and test the continuity in the output stages. If hsort open the leads to the output section and then power on. If the relay stays we have found the fault. you can go on to change the failed outputs. If however the outputs were tested ok, then your fault could be the relay or the protect circuit, Hold a rely for a moment to see if the amplifier powers on, if so check the relay drive transistor , the biasing to the stage. Try this out and I hope my advice helps. Good day

Audio Players &... | Answered on Jan 19, 2021

0 Answers

Luxor-46ccflt2. Question marks in software version box. USB not displaying files although detects device. Source list displays only TV. Possible corrupt firmware? Can this be fixed? Thanks

Audio Players &... | Posted on Jan 17, 2021 | Be the first to answer

0 Answers

Technics sh-eh750. Why aren't bass speakers working?

Audio Players &... | Posted on Jan 16, 2021 | Be the first to answer

1 Answer

Intempo EE2383 SPEAKER...HOW TO RESET

No reset! It is purely a powered speaker with lights.

https://images.esellerpro.com/2579/I/61/EE2383STK.pdf

..

Audio Players &... | Answered on Jan 14, 2021

3 Answers

How to download songs? where do i go?mp3-8400s

You can download MP3 songs on the Internet, some sites have free songs, other sites charge to download these songs.
I suggest you Google search for MP3 songs/music you prefer say, Rock, Classic, Country & Western etc.

Audio Players &... | Answered on Jan 14, 2021

1 Answer

Alan, I need a used or new tweeter for my seeburg Entertainer STD2 jukebox. Do you know its impedance? Size 10.5" x 4"

Lots of speakers here. You only need the driver, not the horn. There are also companies that will repair speakers.

https://www.google.com/search?safe=off&rlz=1C1QJDB_enCA643CA644&sxsrf=ALeKk02J8C81u7WsJgXPNQd1GnrhNFejcw%3A1610574850921&ei=Amz_X86-N_6u5NoPvuewGA&q=seeburg+Entertainer+STD2+jukebox+replacement+speaker

..

Audio Players &... | Answered on Jan 13, 2021

3 Answers

I have a Pioneer XC-F10

I Have managed to solve my instant turning off fault. As its been mentioned before, this is a demo mode fault, heres what I did...

Leave the Unit in standby, and press and hold the "system menu" button you should see the words "demo mode" flash up on the display briefly, at this point press the "set" button to enter demo mode selection finally press the "+" or "-" button to turn the demo mode off.

You have to be quick with the remote buttons when getting into the demo mode, might take a few trys.

I'm not sure if this will fix everyones fault, but certainly helped with mine. Good Luck.

Audio Players &... | Answered on Jan 13, 2021

5 Answers