20 Most Recent OKI MICROLINE 320 Matrix Printer - Page 3 Questions & Answers

Error code 122 means " Low voltage FAN error ".

Is the FAN (bottom right of the front) of the low voltage power supply block working? Is the FAN connector connected correctly?

Check to make sure connection of the FAN connector. Replace the low voltage power supply unit. Replace the FAN motor. Replace the low voltage power supply unit.

Source: https://www.okoki.co.uk/how-to-fix-oki-printer-error-codes

in case you need it ....The Administrator log in for the menus s :admin pw: aaaaaa your answer is here: http://www.manualslib.com/manual/916780/Oki-Mc361.html?page=19

Hello, you can read the service manual. https://www.manualslib.com/manual/916780/Oki-Mc361.html#manual

Sometimes if there was a paper jam and someone removed it without getting all of the paper, then there could be a small piece of paper still in the way of the sensor. If you have any compressed air it might help to blow it out of the sensor area. I have had issues with that in the past as well, so I opened up the area it said it was jammed - gave it a good going over with the can of compresses air, and it seemed to clear out the jam.

It could be a re-allocation of IP address. The best solution to that is to allocate the printer a specific permanent IP address and but the same setting into the port address for the machine on every PC using it

Hi https://www.okishop.co.uk/oki-error-codes Hope this helps,

Please feel free to contact our customer service number +1-(845)-477-5334 to fix all Oki Fax product related issues

The printer seems to have both USB and ethernet connections therfore any PC or Mac should be able to connect without any problem. You will need to install the compatible driver for your peeing system. This can be found on the manufacturer website. Hope it helps

power down the printer for 30 minutes. remove and then insert the magenta toner. power on.

https://www.okishop.co.uk/oki-error-codes