20 Most Recent
Olympus SP-350 Digital Camera - Page 5 Questions & Answers
Firmware update problem
Try first to remove batteries and to put them back after two minutes, if firmware is damaged you may not be able to fix it by yourself.
Card error
have you tried using a different memory card? maybe this one is damage
Can't transfer pictures to my computer
I work as a Olympus DTS Agent. It sounds like your cable is bad or your Port on your camera is bad. One tip that I can recommend other then calling us at tech Support 1-888-553-4448 is be sure you are always plugging camera in through a usb port on the back of the computer.
Power on
I have same problem, Im gonna to try put a regular charger,then wi will see
Problem with my sp-350
either the card takes a lot of time to write ur data or the battery isn't giving enough power
SP-350 didital
Hi ,
There have been a few problems with high-capacity cards , and cards getting corrupted.
As a first course of action, try replacing the memory card with a mid range ammount of memory.
If this does not work, you may need to reinstall the camera's software or driver. These are available online - with your manual .
I'll just look for it for you....
Size of pictures
You cannot make it better, even if you make it larger. If your goal is to make it smaller, Kodak's EasySHare software will allow you to edit and resave as a smaller file for things like web pages or attachments, for example. Just please understand that less data and smaller file size will also limit the print quality to smaller good quality images.
Troubles Transferring, now power
You are describing a software and firmware update.
The software update should not have any effect on the camera start-up, but the firmware update could.
Please check to see if there were any instructions sent with the firmware files (like a Read Me file or release notes), which might give you special instructions for properly loading the firmware. Some manufacturers require that you hold down certain buttons on the device when power cycling to load the firmware.
Also ALWAYS be sure to have newly charged batteries of the right type, because a power failure in the middle of a firmware upgrade can ruin a device, requiring service.
Go to their web site to get details about the firmware update, if you are sure you did infact update firmware. Also, their tech support should be able to assist you with additional issues if their recent release is problematice for any reason.
Good luck.
DigiChick
Getting pictures from camera to memory card
first of all those pictures cant be stored itself
because camera has no internal memory
so those pictures need to be taken again by u after installing a new memory card in it
Camera lens stuck in on position
this happens since the lens section assembly is damages.
and this can be corrected by doing a proper service to it.
and hence i recommend u to take it to some service center for repair
Lens stuck...
this happens since the lens section assembly is damages.
and this can be corrected by doing a proper service to it.
and hence i recommend u to take it to some service center for repair.
Olympus sp 350
There is a "quick" button located on the back of the camera just for flashes. It is the first button to the right of the power button and it looks like a crooked lightning bolt arrow that points down. If you are in any picture taking mode, push this button and it will toggle you through each flash option, auto, red eye (eyeball symbol), flash (same symbol as the button, this mode will make the flash work everytime you take a picture), red eye and flash, and no flash (careful, in this mode you have to allow for the camera to focus, the lens will stay open a long time in a dark atmosphere -- if you don't hold the camera still you will get a blurry picture).
Not finding what you are looking for?