20 Most Recent EliteGroup P4M800-M7 Motherboard Questions & Answers

harddisk maybe necessary to set single drive by 2 jumper settings. if IDE cable is used and its standing alone.

EliteGroup... | Answered on Feb 14, 2016

plug your memory out, and see what happens, you probably have faulty memory, or one of them is faulty, or faulty wiring from your ATX power supply.....i am betting its the memory, but i sense it could be electrical.....

EliteGroup... | Answered on Feb 14, 2016

your stuck at the boot from DVD, you must boot form C to finish installation.

EliteGroup... | Answered on Dec 14, 2014

Check if your fan is moving when you power on your computer. It probably isn't powered, try to search your motherboard map (I got one with all other manuals and safety instructions) and carefully try to connect all cables.

EliteGroup... | Answered on Jul 27, 2014

Hmmm, I have seen a few people reporting this problem with this motherboard... seems to me that it might be a bug in the bios. Well, I had exactly the same problem. It did not even give a beep sound when the memory was completely removed. I was convinced that the motherboard was faulty. Then I thought of trying the following that helped:

On the board the JCMOS1 has 3 pins and pins 1 and 2 are closed in normal operation. Moving the jumper to pins 3 and 4 puts the motherboard in clear CMOS memory mode. So this is what I tried; I move the jumper to pins 3 and 4, pressed power a few times (although I don't think that is necessary), and after about 30 seconds I moved the jumper back to pins 1 and 2. Then when I pressed power the motherboard FINALLY emitted a beep and started up. On first start up I got a message, something to the effect of "CMOS checksum error", but I was then able to go into the bios reset defaults. I then saved and went out and my motherboard has been working fine since then. Hope this helps someone who has a similar issue.

EliteGroup... | Answered on Mar 13, 2014

Voici le lien pour telechargez les pilotes de sound pour ton carte de mere.http://download.ecsusa.com/dlfileecs/driver/mb/sound/realtek/realtek.zip

EliteGroup... | Answered on Nov 23, 2013

try downloading driver pack solutions, that will do the trick, get from torrents.

EliteGroup... | Answered on Oct 09, 2013

driver audio p4m800-m7

EliteGroup... | Answered on Jul 10, 2013

Hello here are the homepages:


Here are the other model ( version 3,1 )


This is important when the drivers needed to be found.

But here seems to be no drivers for windows 7.

Here is only drivers for vista and xp, and there is absolutely no guaranty, the drivers will work on windows 7.

You need to setup the bios boot settings, in order to boot from the drive.
First boot device dvd drive, and second the harddrive.
This selection is urgent, when installing windows.

Other selections maybe needed, depending on the bios version.
The sata drive, should be shown in the bios main meny, when entering the bios.

I suggest you to download the manual, if you don`t have it, and read the setup install section, for basic boot procedure.

Good luck

EliteGroup... | Answered on Feb 26, 2013

Hello here is the homepage:


Here is the other version (3.1)


Your mainboard supports P-IDE and SATA drives.

A large ide drive, is hard to find, but a sata drive does
come up to 3 tb.
But it depends what windows system you have.
Windows xp, supports up to 2 tb, with the latest service pack installed.

Good luck

EliteGroup... | Answered on Feb 16, 2013

Here is the link :

Select the one that says "On board Audio". There are two options: one for WIN Vista and the other for Win XP/2000, etc


EliteGroup... | Answered on Jan 02, 2013

if your computer came with a motherboard disc the sound drivers could be on it

click start control panel administration tools computer management device manager scroll to sound video and game controllers you might see a yellow question / exclamation? ! mark or a red X Right click to reinstall drivers

or you might download slimdrivers


note: it will find all of your outdated drivers

this is a free driver solutions

which will automatically search for and find the correct driver

just type in what you want or need be specific you might have to try a few times to get it right



free program, paid update available

hope it helps

EliteGroup... | Answered on May 31, 2012

Your motherboard is a BIOSTAR right ?

Ok there are 2 versions I will post the drivers for those 2 versions.

P4M800-M7A v1.0

These are the complete drivers, the sound driver is there too under onboard audio.

P4M800-M7A v7.0

From what I can see they both use the same drivers.

I hope this helps.

The elitegroup website has a similar name but no A at the end

So from your model I would say it is a biostar, get it from the links above, if it is an elitegroup (ECS) get it from the last link.

EliteGroup... | Answered on May 31, 2012

Hi endryyakuza,
The VGA card your referring to is VIA/S3G P4M800 VGA Driver . And you can find that driver HERE.
Good Luck,

EliteGroup... | Answered on May 12, 2012

Microsoft has a program that will run on your current PC. It will check & confirm if your system can handel Vista. It will also show you what is not compatible with Vista. It will check every piece of hardware including your board & even your printer if it's connected & turned on.
It's a must use program for people who are thinking of installing Vista.
Click the link provided: http://www.microsoft.com/windows/products/windowsvista/buyorupgrade/upgradeadvisor.mspx

Than click Download Windows Vista Upgrade Advisor

Good luck...
& please vote.... Thanks

EliteGroup... | Answered on Mar 30, 2012

Out the windows installation disk in the drive and restart the computer. When the screen pops up select to install windows and Format the hard drive. That is the easiest way to do it.

EliteGroup... | Answered on Nov 23, 2011

Not finding what you are looking for?
EliteGroup P4M800-M7 Motherboard Logo

159 questions posted

Ask a Question

Usually answered in minutes!

Top EliteGroup Computers & Internet Experts

Lee Hodgson
Lee Hodgson

Level 3 Expert

4810 Answers

Michael Thomas
Michael Thomas

Level 3 Expert

3053 Answers

Tareq Bin Mostaq...
Tareq Bin Mostaq...

Level 3 Expert

1449 Answers

Are you an EliteGroup Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

EliteGroup Computers & Internet

  • EliteGroup Computers & Internet

Most Popular Question

want vga driver

  • Computers & Internet