20 Most Recent Teac SL-A100 Shelf System Questions & Answers


I have seen this problem before. Lift the turntable off. It might be held down with a clip around the center pole. Under it you will see a wheel that contacts the turn table and the center shaft of the motor. The motor shaft has 3 0r 4 elevations with different diameters. When you change the speed the wheel will move up and down to different diameter levels on the motor shaft. It must be free to move. It might need some oil at the moving parts as I suspect it is not moving properly.
Hope this helps.

Teac SL-A100... | Answered on Oct 09, 2015


fixya does not sell remote controls. Try a Google search.

Teac Audio... | Answered on Dec 26, 2019


Try filling out this form at TEAC's support page. Only the factory would have access to that manual. It shouldn't be available anywhere else. I know only the Owners Manuals are more typically available.

http://audio.teac.com/contact/repair/

Teac Audio... | Answered on Nov 03, 2019


dear joe i hereby attach the link for the service manual for the same. pl let me know it is useful to you r not by reply me. https://www.vintageshifi.com/repertoire-pdf/pdf/telecharge.php?pdf=Teac-A-3340-S-Service-Manual.pdf

Teac Audio... | Answered on Oct 15, 2019


Hi Carol, from what you said, you could make the tape move
On the front of your Teac A103, there are two Instruments, called VUmeters, ask, when you play the tape, do the needles of these vumeters move indicating the presence of sound?
If they move, it would indicate that the tape is being read
If they do not, it may be that you are playing a tape without recording or that the reading head is dirty, with accumulation of debris from the cassette tapes
To clean them, you should use a thin cotton cloth, wet with a little alcohol, open the cassette door and pass it through the upper end of the heads, until they are clean, the head, which reproduces and records the cassettes is the that is in the middle
If all this is done, you get the vumeters to move and nothing comes out, you can try a pair of headphones and connect them to the output on the right
if you hear sounds, check the RCA cables for interconnection with the amplifier
Do the tests I suggest and comment
Indicate to which device you are connecting the cassette output to play
I await your comment
Regards Franco Dosil

Hola Carol, por lo que comentas, has podido hacer que la cinta se mueva
en el frente de tu Teac A103, hay dos Instrumentos, llamados VUmetros, pregunta, cuando reproduces la cinta, las agujas de estos vumetros se mueven indicando presencia de sonido?
Si se mueven, indicaria que se esta leyendo la cinta
Si no lo hacen, puede ser que estas reproduciendo una cinta sin grabacion o que el cabezal de lectura se encuentre sucio, con acumulacion de residuos de las cintas de los cassettes
Para limpiarlos, debes usar un pa?o fino de algodon, mojado con un poco de alcohol, abrir la puerta de la cassettera y pasarlo por el extremo superior de los cabezales, hasta que queden limpios, el cabezal, que reproduce y graba los cassettes es el que se encuentra en el medio
Si hecho todo esto, logras que se muevan los vumetros y no sale nada, puedes probar con un par de auriculares y conectarlos en la salida que se encuentra a la derecha
si escuchas sonidos, revisa los cables RCA de interconexion con el amplificador
Has las pruebas que te sugiero y comenta
Indica a que aparato estas conectando la salida de la cassetera, para reproducir
Espero tu comentario
Saludos Franco Dosil

https://www.vintageshifi.com/repertoire-pdf/pdf/telecharge.php?pdf=Teac-A-105-Service-Manual.pdf



Teac Audio... | Answered on Oct 15, 2019


You can but be shure to measure the voltage that is required by the two units, also check that the polarities are the same. The current consumption should be fairly the same

Teac Audio... | Answered on Oct 15, 2019


The most likely explanation is some dirt or dust on the lens inside of the machine.

Teac Audio... | Answered on Sep 30, 2019


Hi Rick, in order to connect your DVD player to your Teac, the DVD player, you must have audio outputs with RCA Red and White (L and R) connectors and enter it into the Auxiliary input of your Teac, or other input available
Discuss which brand and model is your DVD player, to find the best possible solution
I await your comment
Greetings Franco Dosil

Hola Rick, para poder conectar tu reproductor de DVD a tu Teac, el reproductor de DVD, debe contar con salidas de audio con conectores RCA Blanco y Rojo (L y R) y lo ingresas en la entrada Auxiliar de tu Teac, u otra entrada disponible
Comenta que marca y modelo es tu reproductor de DVD, para encontrar la mejor soluci?n posible
Espero tu comentario
Saludos Franco Dosil

Teac Audio... | Answered on Jun 14, 2019

Not finding what you are looking for?
Teac SL-A100 Shelf System Logo

Popular Tags

2 questions posted

Ask a Question

Usually answered in minutes!

Top Teac Audio Players & Recorders Experts

 Grubhead
Grubhead

Level 3 Expert

5699 Answers

Marvin
Marvin

Level 3 Expert

85222 Answers

The Knight
The Knight

Level 3 Expert

76204 Answers

Are you a Teac Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Teac Audio Players & Recorders

  • Teac Audio Players & Recorders

Most Popular Question

turntable plays fast

  • Audio Players & Recorders
Loading...