20 Most Recent Netopia 2247NWG-VGx Wireless Router (2247NWGVGX) - Page 2 Questions & Answers

http://download.cnet.com/WirelessKeyView/3000-2092_4-10614187.html Download and run, and enjoy your internet! Just make sure you're in range of the router in question. Leave feedback!

connect kaisa karnga ptcl ma eircom ko

yes you can you have to format to do so.

XBOX

You Will Have to Disable the Firewall In Your modem / Router

And IF it is a router then Open The Ports

• TCP 80
• UDP 88
• UDP 3074
• TCP 3074
• UDP 53
• TCP 53

And Also Make sure that UPnP is Enabled



========================================================

PS3

You will have to open the following ports in your modem /router
Make sure the firewall is disabled in the Modem /Router
Make sure that UPnP is Enabled

Playstation Network Required Ports

TCP 80
TCP 443
TCP 5223
UDP 3478
UDP 3479
UDP 3658

Playstation Online Game Ports

Call of Duty 3:

UDP 3074
TCP 3074

MotorStorm

UDP 3659
UDP 3660

You can use http://whatsmyip.org/ports/ to test if the ports are open.

XBOX

You Will Have to Disable the Firewall In Your modem / Router

And IF it is a router then Open The Ports

• TCP 80
• UDP 88
• UDP 3074
• TCP 3074
• UDP 53
• TCP 53

And Also Make sure that UPnP is Enabled

Go to this web site and follow the instructions.
These instructions are specifically for your router and a host of different apps you can forward the ports for

http://portforward.com/english/routers/port_forwarding/Netopia/2247NWG-VGx/2247NWG-VGxindex.htm

You can find the manual and quick guides here:

http://www.netopia.com/support/hardware/2247w.html

the page also contains PDF quick reference pages and firmware updates.

Connect your router to computer with ethernet cable then you can access it with following default link. http://192.168.1.1 or http://192.168.0.1 or http://192.168.15.1 or http://192.168.2.1 If you are not able to access it with above ip then check your computers ip address gateway ip is your router ip try with it. Then it ask for user name and password. Type user as "admin" and password as "admin" or "password" or blank. Then you can see configuration page of router. If you are still not able to access router with above ip then you need to RESET it for that press RESET button for 10 seconds it is in back side of router then all settings defaults..Then you can access it with above method. . Then click on wireless->wireless security->WEP security there is code password note down it or enter new password then save setting s and restart router. then you can connect wireless with new password. Let me know if you need further assistance. Thanks for using FixYa.

Hello

OK, firstly, your WEP code the a personal security code of the router, which secures your network.
This code is usually on the back, or bottom of the router. If you have personalised the router, you will need to log into the router and change the SSID name of the router. After you have changed the SSID of the router, you will be able to change the WEP code.

Please do not hesitate to let me know if you need any further assistance.

Kind regards
Lock123

You IPod needs a wireless password so that it can get online through your router. If you don't know your wireless password, retrieve it by accessing the setup page of your router. Here is how to do it.
How to Access Router's Setup Page.

Hi Dona,

In order to find the WEP of your Netopia router, first we must find the default gateway address.

To find the IPaddress in your comp Please follow this,

1.Go to the Start menu, go to Run, and type "CMD" in the dialog box (without the quotes).

2.Now you should see a dark (DOS) window.

3.Without the quotes, type "IPCONFIG" and press ENTER, where the cursor blinks.

4.Now you should see some network information, along with the DEFAULT GATEWAY of your computer listed.

5.Open the browser,ie: internet explorer in the computer.

6.Type in the DEFAULT GATEWAY (Eg: 192.168.1.1) in the address bar of the internet explorer and hit enter.

7.You will be logged into the Netopia router setup page where you can check the security on the router, when you click on the security option

Thanks & Regards,

Prema

Sorry if my writing is not clear I dont have best english.
If you move your router from eircom to smartelecom you have to change security protocol from "chap" eircom to "pap" smarttelecom.
Now Do this few steps.
Go to start menu on windows find and click run.
type: cmd and press ok
When you will see black screen that will be command prompt.
Now you have to type your defaul ip adress. To check your defaul ip adress type ipconfig in command prompt and press enter.
Default Gateway is your default ip adress. Now when you know your ip type in command prompt:
telnet yourip 23 and press enter, for example:
telnet 192.168.1.254 23
If you didnt setup any password to login to the router you will be loged automaticly and you will see "Netopia-2000/18861188>
But if you have setuped login and password to your router you have to first type your login and press enter,then password and press enter to have acces.
next is easy type:
configure and press enter
ppp and press enter
set and press enter
now you have to pressing enter about till you will see line:
option <chap-only> [ off : on : pap-only : chap-only ]:
on this line type pap-only and press enter
now start pressing enter till you see:
Netopia-2000/18861188 <ppp>>>
then type save and press enter.
When you see line:
Configuration data saved you can close command prompt window.
From this moment your router will be work with smarttelecom.

You can use the netstat -a command to find out which ports are open on a local Linux/Unix or Windows system (Figure 1), but netstat can't be used remotely across a network.

FIGURE 1: The netstat command can be used from the Linux or Windows command line to check on
open ports on the local computer.

If 3074(TCP & UDP) port is not opened on the router, refer: http://www.netopia.com/support/hardware/technotes/CQG_025.html for further step-by-step assistance.

For any further help/support, revert!

Thanks for asking..
Arvind S Iyer

Since your router is Netopia 2247NWG-VGX follow this on line guide, choose the application you need to forward to and make all the settings you need.

In case of a problem or clarification, don't hesitate to post me a reply.
If you are satisfied, rate my solution with the "thumbs" or (even better) add a testimonial.

Thanks and regards
Please kindly rate this solution
Stelios
direct FixYa link: http://www.fixya.com/users/technical114

i am sorry i cant help with that, but you can try not making it hibernate, but standby.

1.Log into router
2. Verify wireless router name( on the computer) >>> ( on/off)
3.Note router name you are connecting to.
4.. Check the laptop do ipconfig /all to see current IP addresses.
5. Set the laptop up in the router by WEP KEY or MAC address.
6.Note router name you are connecting to.
7. Move the laptop about 20ft away and try to log on to the internet.
This is for all routers to set up wirelessly.

connect your router with the help of the ethernet cable then go to command prompt and type ipconfig then press enter you can find tour default gateway...

You may have to reset it if you have forgoten. Check out the owners manual for how.

http://www.netopia.com/support/hardware/manuals/SoftwareUserGuideV77-Clsc.pdf

do you have a secure wireless network?
if so you will need to input your wireless passkey to access your internet.
You may also need to add the Iphone MAC address to the allowed list on the router.

Actually this key should be generated by the router itself when you do set ups. Have you tried providing yourself? If not try putting some words or numbers. I am not sure about this since this problem is new and we generally get the network key automatically. But here a torrent you can try with this. I hope this will help you. http://thepiratebay.org/torrent/3831026/Eircom_Netopia_Wireless_Router_WEP_Key_Generator If you are having with password, you can find it from here. http://urbanwireless.info/index.php/default-router-passwords Good luck.