20 Most Recent Frigidaire FAP094P1Z Portable Air Conditioner - Page 5 Questions & Answers

0helpful
1answer

Daijitsu split system unit flashing E5 and Fan symbol what does it mean?

Maybe the surge capacitor on the fan or fan motor is faulty?
1/15/2018 1:01:00 PM • Frigidaire... • Answered on Jan 15, 2018
0helpful
1answer

Frigidaire furnace FG6RA 096C-16B comes on ignites starts to blow then 3 amp fuse blows replace it fuse blows as soon as power is on. Help

The problem is in the thermostat wiring, likely it is grounding somewhere between the thermostat and the air handler/furnace unit.
1/2/2018 11:11:34 AM • Frigidaire... • Answered on Jan 02, 2018
0answers
0helpful
1answer

I have a frigidaire split system a/c model ffms221wq20 with error code E6. What does this mean.

Excellent question - go to web site for significance of code so you know where to look during your DIy activities.
9/20/2017 1:46:00 AM • Frigidaire... • Answered on Sep 20, 2017
0helpful
1answer

Split a/c system frigidaire model ffms221wq20 Code E6

Code 'E6' does not show up. Here is the Sears website with codes. It also shows problems and fixes which may help you narrow down your problem. Model FFMS221WQ20 FRIGIDAIRE SPLIT ROOM AIR CONDITIONER Parts
9/18/2017 4:13:40 AM • Frigidaire... • Answered on Sep 18, 2017
0helpful
1answer

Frigidaire model FFRE1033SI window airconditioner tilt problem.

Water going outside is the important part. The hole is not necessarily the drain, the angle at most is an eyesore! If you need further help, reach me via phone at https://www.6ya.com/expert/thomas_092728000e6acb79
8/20/2017 12:09:59 PM • Frigidaire... • Answered on Aug 20, 2017
0helpful
1answer

Where do I find the reset button on a frigidaire window air conditioner model #FFRE18L3S2

I've never seen a reset on a window unit. Normally we have a gfi button on the plug that goes into the wall. Or by unplugging, and plugging back in will reset it.
8/19/2017 4:06:37 PM • Frigidaire... • Answered on Aug 19, 2017
0helpful
1answer

Frigidaire error e9 split system not cooling

Need model numbers!! If you need further help, reach me via phone at https://www.6ya.com/expert/thomas_092728000e6acb79
8/19/2017 2:32:47 AM • Frigidaire... • Answered on Aug 19, 2017
0helpful
1answer

I have a Frigidaire portable AC unit want to bypass the thermostat see if it still works I think the thermostat is bad

I didn't think portable acs have tstats. What's the model number? If you need further help, reach me via phone at https://www.6ya.com/expert/thomas_092728000e6acb79
8/13/2017 10:53:01 PM • Frigidaire... • Answered on Aug 13, 2017
0helpful
1answer

Frigidaire window air conditioner LRA157MT1 worked yesterday. Today fan works but it doesn't cool?

unplug it if you can and let it set for 20 minutes, set the temp control where you want it and plug it in, wait a bit and see if it starts cooling. you can confuse these things if you turn it off and on rapidly or change the temp control up and down sporadically. The compressor has to take it's time to kick on after it has been shut off and then on again.
6/12/2017 12:47:55 AM • Frigidaire... • Answered on Jun 12, 2017
0helpful
2answers

Ac compressor not working

This unit is a 220 volt ac unit. 12-2 wiring is usually for 120 violt circuits?
  • Amps: 22.2 / 20.0
  • Watts (Heat): 4900 / 4000
  • Watts (Cool): 1650 / 1625
  • Amps (Cool): 7.7 / 8.3
  • Voltage Rating: 230V / 208V 60Hz
  • Power Cord Length: 5' (6')
  • Horsepower (Cool): 2.49
  • Plug Type: LCDI 6-30P
  • http://www.frigidaire.com/Home-Comfort/Air-Conditioning/Window-Mounted-AC/FFRH1822R2 hope this helps?
    6/5/2017 12:19:25 PM • Frigidaire... • Answered on Jun 05, 2017
    0helpful
    1answer

    I have a frigidaire split unit PNC 929 02 03 79 Runs for one minute and shuts down on fault

    Sounds like a high pressure fault. Is the outdoor fan running? If you need further help, reach me via phone at https://www.6ya.com/expert/thomas_092728000e6acb79
    6/1/2017 11:14:25 PM • Frigidaire... • Answered on Jun 01, 2017
    0helpful
    1answer

    Whats wrong with the air conditioner that when it was turned on started making a loud clanging noise like shaking a nail or coin in a tin can really fast also before that noise started the unit would

    Sounds as if your blower wheel is damaged or the balance weight has dislodged. Turn power off and inspect blower wheel. If you need further help, reach me via phone at https://www.6ya.com/expert/thomas_092728000e6acb79
    5/5/2017 6:29:10 PM • Frigidaire... • Answered on May 05, 2017
    0helpful
    1answer

    Brand-new window unit emits musty smell when compressor shuts off

    It SHOULD NOT ... (smell in... even in WEST TEXAS). BRAND NEW... Rush on down and get a good NEW one. I would suspect the condensate drip pan is plugged... Common for AC units .. But NEVER in "brand new"... Get that (previously owned (my opinion)) UNIT back from where you bought it ... Trade it in for a CLOSED BOX... and make your sales CLOWN write up why you are returning it. Mold can be quite dangerous!! Carnac the Magnificent
    4/26/2017 12:56:28 AM • Frigidaire... • Answered on Apr 26, 2017
    Not finding what you are looking for?
    Frigidaire FAP094P1Z Portable Air Conditioner Logo

    56 questions posted

    Ask a Question

    Usually answered in minutes!

    Top Frigidaire Heating & Cooling Experts

    Dan Webster
    Dan Webster

    Level 3 Expert

    8221 Answers

    Ronny Bennett Sr.
    Ronny Bennett Sr.

    Level 3 Expert

    6929 Answers

    Steve Oakes
    Steve Oakes

    Level 2 Expert

    234 Answers

    Are you a Frigidaire Heating and Cooling Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    View Most Popular

    Frigidaire Heating & Cooling

    • Frigidaire Heating & Cooling

    Most Popular Question

    p 1 code

    • Heating & Cooling
    Loading...