20 Most Recent
Frigidaire FAC106P1 Thru-Wall/Window Air Conditioner Questions & Answers
Restet button keeps t rippin
reset buttun? where is it located? your condenser coil is more then likly dirty! cuasing unit to trip on High pressure safety
Keeps flashing ES, not cooling.
The 2 most common issues are a freon leak or the outside unit fan start capacitor goes out. It's more likely a capacitor issue. They fail regularly, especially when it's as hot as it's been this year. I had a fan capacitor go out on one of my 3 units last year and it cost close to $300 for an AC company to come out and fix it. I watched them fix it and it's something that you can do yourself if you know what you're doing and are careful to hook it up right. I have three AC units and another capacitor went out this year and I found a kit with detailed instructions with pictures and phone support at hvacrepairkits.com. It saved me over $200 on the capacitor replacement.
Aircon won't start
Unplug it and open it up. You are looking for a capacitor that goes to the compressor and fan. It may be shaped like a cylinder. On one end, it may be pushed out from within. This is a blown capacitor. Replace this part and the AC should run again.
I have fixed several central air units by finding and replacing the bad capacitor.
When you open it up, also look for burn out wires.
I have a fac106p1 eng2, overheating fan motor
first check the capacitor measure, see if measurement correspond with its label ex. 40 mf or 50 mf. I believe the winding for the fan motor are loosing its insulation, you might need to replace the fan motor, if installing new one follow the diagram and rotation their is an arrow indicating the rotation of the fan blade
Window ac/heater freezes up when using the heater?
This is likely due to a lack of airflow. Make sure that the air filter is clean and that there are no obstructions blocking the air intake or exhaust vents. If this does not resolve the issue, you may need to have a technician come out and inspect the unit for any other potential issues.
Can't change temperature on AC
thats normal its showing ambient when you lower it the number will change to the setting and then will go back to show what the ambient temp as the room gets cooler the temp number will go down and shut off at set temp
Not finding what you are looking for?