20 Most Recent Frigidaire FAC126P1 wall/window Air Conditioner - Page 7 Questions & Answers

0helpful
1answer

I have a Frigidaire split system a/c with error code E1. What does this mean?

Hello friend, thank you for your post! I understand that your Frigidaire split air conditioner is displaying an error code of E1 and you would like to know its meaning. In order to assist you further I would need to have the model number of your air conditioner. With that information I would be able to further assist you. -Matt
4/20/2018 12:28:31 AM • Frigidaire... • Answered on Apr 20, 2018
0helpful
1answer

We have a Frigidaire FAK124R1V AC. Can turn it on, but NO air comes out. We've cleaned the filter and clicked the reset button several times. Is there something else to try before calling for service?

If you choose to use the air conditioner to cool a room when the outside temperature is low, any condensation that naturally accumulates on the cooling coil inside the unit can freeze. When the coils freeze over, the air flowing through the unit fails to cool, and in your case may have blocked any air flow. I assume you can hear the fan but get no flow? Freezing may damage the unit. Allow the unit to defrost by turning it off and leaving it off for several hours, or even days, to allow warm air to flow through the coils and melt the ice. Of course if you live in a place like Minneapolis you might be waiting until April. But you should be able to check whether the coils are clear by removing the filter and shining a flashlight through the air-exhaust cavity. The coils are usually visible just inside. If the ice doesn't melt quickly enough, you can speed things up by pointing the hot air of a hair dryer at the coils through this opening. I also assume since you are in apt you have no access to the exterior side of the unit to check what is going on? Or if this is a window unit just take it out of the window for awhile (granted ... that can be a pain in the you know what). Good luck on your troubleshooting ... I think you are the right track
3/24/2018 6:39:49 AM • Frigidaire... • Answered on Mar 24, 2018
0helpful
1answer

I have a frigidaire window unit model fra256st2,

tx valve problem blockage have it properly diagnosed by an ac specialist check consensor fan is running is separate fan to inside fan
3/24/2018 6:38:34 AM • Frigidaire... • Answered on Mar 24, 2018
0helpful
1answer

When pluggged in, all lights behind the buttons on control touch pad panel light up, then go out. When the 'on' button is pushed, nothing happens. Can you tell me what the problem is? Thanx

First thing to try is turning off the power to the machine for a minute and then turn it back on, if that does not fix it then electronics have a brain problem. I have noticed that appliances with electronic panel controls are having many problems, my washing machine electronic control panel is bonkers but never had problems with the old mechanical controls. In order to fix mine I would have to order the whole panel as you cannot replace parts, I'm sure you unit is the same.
3/24/2018 6:35:08 AM • Frigidaire... • Answered on Mar 24, 2018
0helpful
1answer

PLGFZ397GCG Frigidaire Stove/Oven

Do you have 240 volts at the outlet behind the stove? Should have a double throw breaker at your panel. Make sure both breakers are resetting. If that checks out then it sounds like the power dump may have gotten the control board on the stove and will have to be replaced. There is a small possibility that there may be a fuse on the board. All stoves are different.
3/24/2018 6:34:04 AM • Frigidaire... • Answered on Mar 24, 2018
0helpful
1answer

I have Frigidaire 2.5 ton split Ac showing E7

According to frigid aired error code table it is regarding a Mode Conflict Error, but without your exact model number, I can't clarify this any further except to say that you have one of the heads in heating mode & the other head is in cooling mode which creates the mode conflict squalling the E7 Error Code, I do hope this helps... But please comment further if I can assist you in any way I will happily do so....
3/1/2018 11:13:10 AM • Frigidaire... • Answered on Mar 01, 2018
0helpful
1answer

What does error code e6 mean on frigidaire split inverter a/c unit?

This is a loss of communication with the main control circuit board.
2/28/2018 11:30:58 PM • Frigidaire... • Answered on Feb 28, 2018
0helpful
1answer

I had worked for Frigidaire 17 years in the Edison New Jersey USA.(Home Comfort Div) I am now ready to retire. Who do I contact?

I am recent retiree. Contact your company HR dept first. Then start looking at Social Security Administration. There are many web sites with advice. And radio programs. Hire an advisor or utilize multiple sources and take notes. Many people out there willing to scam your money. Be careful. http://ssa.gov/
2/26/2018 10:52:43 PM • Frigidaire... • Answered on Feb 26, 2018
0helpful
1answer

Daijitsu split system unit flashing E5 and Fan symbol what does it mean?

Maybe the surge capacitor on the fan or fan motor is faulty?
1/15/2018 1:01:00 PM • Frigidaire... • Answered on Jan 15, 2018
0helpful
1answer

Frigidaire furnace FG6RA 096C-16B comes on ignites starts to blow then 3 amp fuse blows replace it fuse blows as soon as power is on. Help

The problem is in the thermostat wiring, likely it is grounding somewhere between the thermostat and the air handler/furnace unit.
1/2/2018 11:11:34 AM • Frigidaire... • Answered on Jan 02, 2018
0answers
0helpful
1answer

I have a frigidaire split system a/c model ffms221wq20 with error code E6. What does this mean.

Excellent question - go to web site for significance of code so you know where to look during your DIy activities.
9/20/2017 1:46:00 AM • Frigidaire... • Answered on Sep 20, 2017
0helpful
1answer

Split a/c system frigidaire model ffms221wq20 Code E6

Code 'E6' does not show up. Here is the Sears website with codes. It also shows problems and fixes which may help you narrow down your problem. Model FFMS221WQ20 FRIGIDAIRE SPLIT ROOM AIR CONDITIONER Parts
9/18/2017 4:13:40 AM • Frigidaire... • Answered on Sep 18, 2017
0helpful
1answer

Frigidaire model FFRE1033SI window airconditioner tilt problem.

Water going outside is the important part. The hole is not necessarily the drain, the angle at most is an eyesore! If you need further help, reach me via phone at https://www.6ya.com/expert/thomas_092728000e6acb79
8/20/2017 12:09:59 PM • Frigidaire... • Answered on Aug 20, 2017
0helpful
1answer

Where do I find the reset button on a frigidaire window air conditioner model #FFRE18L3S2

I've never seen a reset on a window unit. Normally we have a gfi button on the plug that goes into the wall. Or by unplugging, and plugging back in will reset it.
8/19/2017 4:06:37 PM • Frigidaire... • Answered on Aug 19, 2017
0helpful
1answer

Frigidaire error e9 split system not cooling

Need model numbers!! If you need further help, reach me via phone at https://www.6ya.com/expert/thomas_092728000e6acb79
8/19/2017 2:32:47 AM • Frigidaire... • Answered on Aug 19, 2017
0helpful
1answer

I have a Frigidaire portable AC unit want to bypass the thermostat see if it still works I think the thermostat is bad

I didn't think portable acs have tstats. What's the model number? If you need further help, reach me via phone at https://www.6ya.com/expert/thomas_092728000e6acb79
8/13/2017 10:53:01 PM • Frigidaire... • Answered on Aug 13, 2017
Not finding what you are looking for?
Frigidaire FAC126P1 wall/window Air Conditioner Logo

106 questions posted

Ask a Question

Usually answered in minutes!

Top Frigidaire Heating & Cooling Experts

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6963 Answers

David Shaub

Level 3 Expert

2994 Answers

Jaime Hernandez

Level 3 Expert

2343 Answers

Are you a Frigidaire Heating and Cooling Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Frigidaire Heating & Cooling

  • Frigidaire Heating & Cooling

Most Popular Question

drain hole frigidaire window air

  • Heating & Cooling
Loading...