20 Most Recent Whirlpool GHW9150 Duet Washer - Page 5 Questions & Answers

remove the top of the unit and inside is the trouble code paper work that will guide you to anything that is wrong.

New machines, over an hour

Jerry, if you lift the top up to your unit you will find a repair sheet along with the codes inside, that will help you through your problem. Normally when this happens you will have to replace the main control board in the top of your unit. Check for the paper work first though.

if you remove the top of the unit you will find the paper work and in there is the code sheet.

The SD error can mean a couple things. Suds detected, this happens when using the incorrect wash soap. It has to have the "he" logo on the packaging. I know because I used the wrong soap. My clothes would spin but not drain the water. It gave me the SD error. But it can also mean that there is clog or something in the drain hose or drain pump. I had my husband raise up the washer so I could check the hoses for baby socks or ridiculous amounts of dog hair. I found a clump of polyfil from a dog bed right at the intake of the drain pump. I removed it but still no luck. It seems the drain pump was burned up or working at a seriously compromised position. He removed the pump for me and I ordered a new one on Amazon prime. I searched for exact model and oem drain pump. It came in today and I installed it myself. Finally, after a couple weeks I was able to wash and dry towels in one whack! I figured all this out by coming here and searching for a free service manual for my make and model. The service manual really goes in depth on making repairs and it was easy to understand. It gives you the error code, possible reasons and how to fix or troubleshoot them. I had numerous problems with my cabrio and as of tonight, I have over more then to fix and it is probably polyfil related! Good luck.

C:00 is the beginning of diagnostics cycle need to let it finished. It will chime when completed

control board issue, have tech. test

TERRY , CHECK THE PLUG IF IS GFI YOU NEED TO RESET THE PLUG IF THERE IS A LIGHT ON THE PLUG THERE IS A LITTLE RESET BUTTON YOU NEED TO PUSH IN TO RESET ??

On this model you must replace the interface board that controls the buttons on the face of this machine, normally about $300.00 give or take. Sorry, but I hope this helps. you can order it from sears or some other company to see if you can get it cheaper than a repair service.

Have you checked the main plug. is it a fixed plug or one that has been fitted by someone?? CHECK. If flickering only at times then it seems to me the main board or timer could be lose? Are you positive you have checked every section? You sound confident in doing checks. Make sure not plugged in when your doing your checks. Be safe. Check on a different mains socket also. If stops, then the wall socket may be faulty. DONT USE. Lose wire in socket?????

Faulty switch on door

First, unplug your machine. You will then need a T-20 torx driver - remove the 3 screws at the bottom of the front panel. Pull down on that panel and you can then pull it away from the washer. Once you have done that, reach up and you should feel a ring just below the door lock. Pull that ring and the door will open. Be aware though that the Fr error for Whirlpool use to mean a drain problem. If the machine does not drain, it will not want to let the door open. After you get the clothes out, if you want additional help, let me know.

Normally when the door doesn't open, there is water in the tub. It's a safety feature. Have you tried running a drain and spin? A clogged up drain pump chamber or a bad drain pump can cause this. Another issue might be with the door lock it self. If the internal mechanism breaks, it can cause the blinking lights. Good Luck!

The first thing you might check is to see if there is a problem with the door switch. It lets the washer know that the door is closed so water doesn't spill out. Visually check to see if it looks damaged in any way or if something may have gotten jammed or gunk built up. We have a top load whirlpool that got detergent spilled in the door switch area and I had to clean it out. It worked after that.

Hello. Please check that error code--on a freezer, CF means communication fault--the main board and the control panel have lost contact with each other. I checked a service manual for the duet series...the error codes will be "F" and then a number such as 02, 05, 06, etc...Also, please provide the model number--I will be able to help you much more accurately! Additionally, what specific issue are you having with the washer? Thanks!

Check that you havnt blown a fuse or tripped he circuit breaker in the meter box. Plug in something that you know works into the same power outlet as the washer to confirm if power is there.

Maybe this will help, but I'm not sure F99 - NOT SUPPORTED User selected on the UI the unsupported Cycle on the CCU. Mismatch of User Interface and CCU or corrupted EEPROM. Potential Causes 1. Perform Service Cycle to pair the UI and CCU SW. 2. Replace User Interface. 3. If failure still present, replace also the CCU. NOTE: During first power up of new CCU and UI combination, a bootphase (uploading parameters) will be performed. This upload can be forced also by the Service Testprogram. Entry: 1. Plug in the machine 2. Machine switched off. 3. Press any key except power for 3 sec, release for 3 sec. 4. Repeat this procedure 3 times During the failure history indication the upload will be done UI-user interface CCU-central control unit Dado