20 Most Recent Fahrenheat Electric Convector Baseboard Heater, 3' Questions & Answers

go to a radio shack to find replacement knobs. get something called a "bar knob." this has a set screw which holds the knob on the thermo shaft. use a marker and print lo med high and off on the unit or use a brother p touch label maker.

Fahrenheat... | Answered on Aug 31, 2016

Hi google intertherm furnace parts they sell parts on line you may find what you need on there

Fahrenheat... | Answered on Jan 18, 2011

Hello there
It sound alright but You should draw out a wiring diagram on paper first before you tackle the job that way you know you're doing it right.

Good luck Dickson

Fahrenheat... | Answered on Nov 04, 2010

I would say no you as are not going to get the air to circulate round the heater it will just shut off

Fahrenheat... | Answered on Aug 17, 2010

Single Pole is 120v
Double Pole is 240 volts

Fahrenheat... | Answered on Jul 14, 2010

in a 220 setup you don't use the white wire. just your other ones. just wire nut it off

Fahrenheat... | Answered on Nov 29, 2009

how to wire this unit

Fahrenheat... | Answered on Oct 26, 2009

I just had the same problem last night. Wire the two red wires from the thermostat to the power source from the service panel. The remaining two black wires from the thermostat connect to the heater.

Fahrenheat... | Answered on Feb 09, 2009

First, is this a 120 VAC or 240 VAC heater? 120 VAC heater will usually have one Black & one White wire and 240 VAC heater will usually have two Black wires or one Black & one Red wire. If it is a 120 VAC heater then you need to supply the white wire at the heater with a neutral (white) wire from the breaker panel. If it is a 240 VAC heater then you need to verify that you have 240 VAC at the heater from Black lead to Red lead. If you are not sure about how to do this please have an experienced electrician look at it so you don't get electrocuted and/or burn up your new heater. Hope this helps!

Fahrenheat... | Answered on Dec 10, 2008

Have you tried just direct wiring the heater to your wires from the panel. Turn off breaker, wire up to heater, turn on breaker. If it works you are either wiring the thermostat wrong or the thermostat is defective.

Fahrenheat... | Answered on Dec 09, 2008

copy and paste this link into your browser and it will help you. http://www.qmarkmeh.com/Develop/prod_pdf/2500wiring.pdf

Fahrenheat... | Answered on Dec 03, 2008

About 3000 dollars

Fahrenheat... | Answered on Nov 30, 2008

You need to check ampere of the units and make sure your not putting to much on one circuit. you take the load side of the thermostat and attach to the other heater.

Fahrenheat... | Answered on Nov 30, 2008

It sounds like you are not getting the correct voltage for the heating element. If you wired a single pole thermostat, and its a 220v unit, then it will not get hot enough, like you are saying. If its a 220 heater, you need a 2p2t thermostat. The parts supplier will know what this means.

Fahrenheat... | Answered on Mar 20, 2008

Baseboard heaters are easy to hitch up. You can have a wall mounted thermostat or an integral thermostat. The diagram I have is for the integral thermostat. Follow the diagram and it should work.

Fahrenheat... | Answered on Nov 29, 2007


Fahrenheat... | Answered on Oct 18, 2019

What is this? please give exact details.

Fahrenheat... | Answered on Apr 12, 2019

Not finding what you are looking for?
Fahrenheat Electric Convector Baseboard Heater, 3' Logo

26 questions posted

Ask a Question

Usually answered in minutes!

Top Fahrenheat Heating & Cooling Experts

Paul Carew

Level 3 Expert

3505 Answers

Brad Brown

Level 3 Expert

18229 Answers

Lee Hodgson
Lee Hodgson

Level 3 Expert

4808 Answers

Are you a Fahrenheat Heating and Cooling Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Fahrenheat Heating & Cooling

  • Fahrenheat Heating & Cooling

Most Popular Question

fahrenheat baseboard heater knobs

  • Heating & Cooling